• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.18-27
• /
• 2015

Since a Compton camera has high detection sensitivity due to electronic collimation and a good energy resolution, it is a potential imaging system for nuclear medicine. In this study, we investigated the feasibility of a Compton camera for multi-tracer imaging and proposed a rotating Compton camera to satisfy Orlov's condition for 3D imaging. Two software phantoms of 140 and 511 keV radiation sources were used for Monte-Carlo simulation and then the simulation data were reconstructed by listmode ordered subset expectation maximization to evaluate the capability of multi-tracer imaging in a Compton camera. And the Compton camera rotating around the object was proposed and tested with different rotation angle steps for improving the limited coverage of the fixed conventional Compton camera over the field-of-view in terms of histogram of angles in spherical coordinates. The simulation data showed the separate 140 and 511 keV images from simultaneous multi-tracer detection in both 2D and 3D imaging and the number of valid projection lines on the conical surfaces was inversely proportional to the decrease of rotation angle. Considering computation load and proper number of projection lines on the conical surface, the rotation angle of 30 degree was sufficient for 3D imaging of the Compton camera in terms of 26 min of computation time and 5 million of detected event number and the increased detection time can be solved with multiple Compton camera system. The Compton camera proposed in this study can be effective system for multi-tracer imaging and is a potential system for development of various disease diagnosis and therapy approaches.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.181-192
• /
• 2022

Active vibration control system(AVCS) for helicopter enables to control the vibration generated from the main rotor and has the superb vibration reduction performance with low weight compared passive vibration reduction device. In this paper, FxLMS algorithm-based vibration control software of the light civil helicopter tansmits the control command calculated using the signals of the tachometer and accelerometers to the circular force generator(CFG) is developed and verified. According to the RTCA DO-178C/DO-331, the vibration control software is developed through the model based design technique, and real-time operation performance is evaluated in PILS(processor in-the loop simulation) and HILS(hardware in-the loop simulation) environments. In particular, the reliability of the software is improved through the LDRA-based verification coverage in the PIL environments. In order to AVCS to light civil helicopter(LCH), the dynamic response characteristic model is obtained through the ground/flight tests. AVCS configuration which exhibits the optimal performance is determined using system optimization analysis and flight test and obtain STC certification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.962-970
• /
• 2009

This paper proposes a self-organizing scheme which collects the information of neighboring cells, and then assigns a Physical Cell Identifier (PCI) for a newly deployed cell in LTE systems. The number of PCIs are limited, so the reuse of PCIs in different cells is unavoidable. In a dense urban environment where many small cells such as Pico/Femto cells are deployed under macro cells, it is expected that the number of PCIs becomes more limited. Therefore, the limited number of PCIs needs to be allocated very efficiently. We propose a PCI allocation scheme for a newly deployed cell that can autonomously select a PCI to increase PCI reuse efficiency by utilizing the levels of received signal strength from neighboring cells. To evaluate the performance of the proposed scheme, simulations have been developed and performed with two scenarios on the coverage types of newly deployed cells. When the proposed scheme is applied, the simulation results show that the number of PCIs required for the operation of the system can be saved so that PCIs can be efficiently reused.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.69-81
• /
• 2012

Diverse geostatistical tools such as kriging have been used to estimate the volume and spatial coverage of contaminated soil needed for remediation. However, many approaches frequently yield estimation errors, due to inherent geostatistical uncertainties. Such errors may yield over- or under-estimation of the amounts of polluted soils, which cause an over-estimation of remediation cost as well as an incomplete clean-up of a contaminated land. Therefore, it is very important to use a better estimation tool considering uncertainties arising from incomplete field investigation (i.e., contamination survey) and mathematical spatial estimation. In the current work, as better estimation tools we propose stochastic simulation approaches which allow the remediation volume to be assessed more accurately along with uncertainty estimation. To test the efficiency of proposed methods, heavy metals (esp., Pb) contaminated soil of a shooting range area was selected. In addition, we suggest a quantitative method to delineate the confident interval of estimated volume (and spatial extent) of polluted soil based on the spatial aspect of uncertainty. The methods proposed in this work can improve a better decision making on soil remediation.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.429-437
• /
• 2013

Recently, wireless mesh network has been focused as a core technology for resolving the issues of shadow zone and distributed bypass route as it has broad service coverage as well as good scalability features. It, however, provides users with relatively lower QoS than infrastructure-based networks. In order for addressing this QoS issue and also enhancing the routing performance of mobile WiMax mesh network, this paper proposes a load sensing QoS routing (LSQR) scheme. In the proposed LSQR, each node figures out network congestion status and selects a bypass route accordingly. With this scheme, we can expect good load balancing effect by changing the routing paths from centralized links to distributed links under a heavy traffic condition. From the simulation results using NS-2, it has been verified that the LSQR shows lower packet loss rates and data transmission delays than the existing representative routing schemes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.219-225
• /
• 2014

The New efficient Mux-based scan latch cell design and scan test of LOS/LOC modes are proposed for detection of delay faults in digital logic circuits. The proposed scan cell design can support LOS(Launch-off-Shift) and LOC(Launch-off-Capture) tests with high fault coverage and low scan power and it can alleviate the problem of the slow selector enable signal and hold signal by supporting the logic capable of switching at the operational clock speeds. Also, it efficiently controls the power dissipation of the scan cell design during scan testing. Functional operation and timing simulation waveform for proposed scan hold cell design shows improvement in at-speed test timing in both test modes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1638-1654
• /
• 2018

The heterogeneous network (HetNet) has been one of the key technologies in Long Term Evolution-Advanced (LTE-A) with growing capacity and coverage demands. However, the introduction of femtocells has brought serious co-layer interference and cross-layer interference, which has been a major factor affecting system throughput. It is generally acknowledged that the resource allocation has significant impact on suppressing interference and improving the system performance. In this paper, we propose a hybrid-clustering algorithm based on the $Mat{\acute{e}}rn$ hard-core process (MHP) to restrain two kinds of co-channel interference in the HetNet. As the impracticality of the hexagonal grid model and the homogeneous Poisson point process model whose points distribute completely randomly to establish the system model. The HetNet model based on the MHP is adopted to satisfy the negative correlation distribution of base stations in this paper. Base on the system model, the spectrum sharing problem with restricted spectrum resources is further analyzed. On the basis of location information and the interference relation of base stations, a hybrid clustering method, which takes into accounts the fairness of two types of base stations is firstly proposed. Then, auction mechanism is discussed to achieve the spectrum sharing inside each cluster, avoiding the spectrum resource waste. Through combining the clustering theory and auction mechanism, the proposed novel algorithm can be applied to restrain the cross-layer interference and co-layer interference of HetNet, which has a high density of base stations. Simulation results show that spectral efficiency and system throughput increase to a certain degree.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1311-1327
• /
• 2016

We propose a multi-state model for analyzing semi-competing risks data with interval-censored or missing intermediate events. This model is an extension of the 'illness-death model', which composes three states, such as 'healthy', 'diseased', and 'dead'. The state of 'diseased' can be considered as an intermediate event. Two more states are added into the illness-death model to describe missing events caused by a loss of follow-up before the end of the study. One of them is a state of 'LTF', representing a lost-to-follow-up, and the other is an unobservable state that represents the intermediate event experienced after LTF occurred. Given covariates, we employ the Cox proportional hazards model with a normal frailty and construct a full likelihood to estimate transition intensities between states in the multi-state model. Marginalization of the full likelihood is completed using the adaptive Gaussian quadrature, and the optimal solution of the regression parameters is achieved through the iterative Newton-Raphson algorithm. Simulation studies are carried out to investigate the finite-sample performance of the proposed estimation procedure in terms of the empirical coverage probability of the true regression parameter. Our proposed method is also illustrated with the dataset adapted from Helmer et al. (2001).

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.77-85
• /
• 2009

We propose a new image pixel architecture which has OFD(Over Flow Device) node by improving conventional 3TR pixel structure. Newly designed pixel consists of photo diode which is verified with HSPICE simulation, PMOS reset transistor, several NMOS and several PMOS transistors. Photodiode signals from each PMOS and NMOS are detected by Reset PMOS. These output signals give enough chances to detect wide operation coverage because OFD node has overflow photocurrent. According to various light intensity, we analyzed characteristic of the output voltage with a SPICE tool. Proposed pixel output has specific value which can detect possible from $0.1{\mu}W/cm^2$ to $10W/cm^2$ light intensity. It has wide-dynamic range of 160 dB.