• 한국지반환경공학회 논문집
• /
• 제4권4호
• /
• pp.25-34
• /
• 2003

본 논문에서는 일련의 실내실험을 통하여 하수회의 기본특성, 다짐, 압축강도, 압밀, 투수 및 CBR 특성을 분석하여 폐기물 매립장의 차수재 및 복토재 등의 건설재료로서 하수슬러지 소각재의 활용방안을 연구하였다. 특히, 하수슬러지 소각재의 치환률을 5, 10, 15, 20, 25, 30%로 변화시키면서 점토벽돌을 제작하여 품질시험을 실시하였다. 하수슬러지 소각재의 투수특성을 확보하기 위하여 혼합재로서 벤토나이트와 소석회를 사용하였다. 실험결과, 벤토나이트 혼합비가 증가함에 따라 투수계수는 감소하며 차수재로 사용가능한 투수계수가 $1{\times}10^{-7}cm/sec$ 이하로 되는 벤토나이트의 혼합비는 20% 정도로 나타났다. 일축압축시험결과 하수슬러지 소각재는 복토재의 일축압축강도 기준을 만족하는 것으로 평가되었다. 점토벽돌에 대한 품질시험 결과 하수슬러지 소각재의 치환률이 증가함에 따라 압축강도는 감소하였으며, 3종 점토벽돌의 품질기준을 만족하는 하수회의 최대치환률은 15% 정도로 나타났다.

• 융합정보논문지
• /
• 제8권1호
• /
• pp.227-233
• /
• 2018

본 연구는 보온성이 우수한 시설하우스용 보온덮개를 개발하고, 나아가 해당 제품의 사업화 방안을 제안하는 것을 목표로 하였다. 공기층을 형성시켜 보온 효과를 증대시키기 위해 우모를 충전재로 사용하였는데, 이때 우모는 의류나 기타 섬유 제품에는 잘 사용되지 않고 폐기 처분되는 깃털(Feather)을 사용하였다. 개발된 보온덮개는 시설하우스의 외측을 덮어 농작물을 보온하는 제품으로, 우모가 충전되는 충전재, 패딩, 내피, 단열재, 외피를 포함하는 다층 구조로 이루어졌으며, 실험을 통해 보온율을 검증하였다. 다양한 적용을 위해 시설하우스의 내측 또는 내부 소형 하우스에 사용될 수 있는 보온 덮개도 개발하였다. 나아가 기술과 마케팅의 융합 개발 체제를 통해 제품화에 성공하였으며, 마케팅 전략을 도출하여 사업화 방안을 제안하였다. 본 기술은 보다 다양한 시설하우스 자재나 기타 산업용 제품에 응용 가능할 것으로 본다.

• Geomechanics and Engineering
• /
• 제5권2호
• /
• pp.87-97
• /
• 2013

In this paper, a novel fibrous material known as axially reinforced braided composite rods (BCRs) have been developed for reinforcement of soils. These innovative materials consist of an axial reinforcement system, comprised of longitudinally oriented core fibres, which is responsible for mechanical performance and, a braided cover, which gives a ribbed surface texture for better interfacial interactions with soils. BCRs were produced using both thermosetting (unsaturated polyester) and thermoplastic (polypropylene) matrices and synthetic (carbon, glass, HT polyethylene), as well as natural (sisal) core fibres. BCRs were characterized for tensile properties and the influence of core fibres was studied. Moreover, BCRs containing carbon fibre in the core composition were characterized for piezoresistivity and strain sensing properties under flexural deformation. According to the experimental results, the developed braided composites showed tailorable and wide range of mechanical properties, depending on the core fibres and exhibited very good strain sensing behavior.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.65-71
• /
• 2001

Absorbers such as porous materials and panels have limited absorption characteristics to some frequency bands. There is a need for absorbers with high absorption coefficients in a wide frequency ranges to make good response of room acoustics. This is almost impossible for a single absorption material. Composite absorption structure with cover, porous material. and air gap is known to have those wide frequency characteristics. In this basis. various composite absorption structures are measured and investigated as wide range absorption structures. Measurements are performed according to an international standard, ISO 354. Various surface types such as wooden slits, wood/steel perforated panels are selected as surface covers, and also various porous materials such as polyurethanes, polyesters, and glasswools are used inside the covers. Result shows that the area of void parts of surface materials is critical to high frequency absorptions, and thickness of air gaps are critical factor of the peak absorptions of low frequency bands.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.268-271
• /
• 2010

In this paper, forward and reverse analysis is introduced in order to estimate the elastic-plastic properties from a power-law hardening bulk specimen materials with one simple spherical indentation impression test. In order to verify the reliability of the reverse analysis, we have simulated about a large range of materials that essentially cover all engineering materials, using ABAQUS(6.91) program. Then, we could obtained the fitting functions and plastic parameters from the numerical analysis results. Next, through the procedure of reverse analysis we can obtain the yield stress and power-law exponent. Finally, obtain good agreement between the result from reverse analysis and initial input data from experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.577-580
• /
• 2004

Recently, DFRCCs (Ductile Fiber Reinforced Cementitious Composites), materials with remarkable ductility when compared to ordinary fiber-reinforced concrete (FRC), have been developed and studied actively in the US, Japan, and many European countries. The transformation of failure behavior from brittle to ductile is achieved by incorporating with fracture mechanics concept especially micro-mechanical models approach of cementitious composite materials in manufacturing ordinary fiber-reinforced composites. The purpose of this study is to accurately understand the shear behavior of DFRCC repaired RC beams. Using a four-point bending test, the shear strengths and shear stress-deflection relations of DFRCC repaired RC specimens are obtained. The results show that DFRCC can be effectively used for repairing materials for concrete structures.

• 한국전자파학회지:전자파기술
• /
• 제12권1호
• /
• pp.34-41
• /
• 2001

Semiconductors performing digital clocking are a main source of radiated emission noise. Therefore, the most secure method of reducing emission noise is to reduce emission radiated from semiconductors; an application of an absorber to the surface of semiconductors is one of these methods, too. However, in reality, it is difficult to achieve as much effect of noise reduction as expected by using only absorber. It is confirmed by experiment in this paper that a loop area within chip has no correlation with radiated emission noise and it is clarified why the existing absorber fails to achieve a satisfactory effect of emission noise reduction. Besides, a new type of chip coating absorber has been developed which can cover up to semiconductor out lead by using ferrite coating material of ferrite/epoxy acrylate substance using only permeability loss out of electromagnetic wave reduction characteristics of materials. As a result of evaluating radiated emission noise by applying this coating absorber to semiconductor device, it could be confirmed that emission noise decreased from about 3 ㏈ up to 20㏈ depending on frequency.

• Advances in concrete construction
• /
• 제3권1호
• /
• pp.15-37
• /
• 2015

Ongoing efforts for improved fracture toughness of engineered cementitious materials address the inherent brittleness of the binding matrix at several different levels of the material's geometric scale through the addition of various types of reinforcing fibers. Crack control is required for crack widths that cover the entire range of the grain size spectrum of the material, and this dictates the requirement of hybrid mixes combining fibers of different size (nano, micro, macro). Use of Carbon Nano-Tubes (CNT) and Carbon Nano-Fibers (CNFs) as additives is meant to extend the crack-control function down to the nanoscale where cracking is believed to initiate. In this paper the implications of enhanced toughness thus attained at the material nanostructure are explored, with reference to the global smeared constitutive properties of the material, through consistent interpretation of the reported experimental evidence regarding the behavior of engineered cementitious products to direct and indirect tension.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.257-261
• /
• 2015

We report on GaAs/AlGaAs quantum well infrared photodetectors (QWIPs) that can cover the spectral range of $3.6-25{\mu}m$. One advantage of the GaAs QWIPs is the wavelength tenability as a function of their structural parameters. We have performed a systematic calculation on the detection wavelength of a typical $GaAs/Al_xGa_{1-x}As$ multi-quantum-well photodetector, with the aluminum mole fraction (x) of $Al_xGa_{1-x}As$ barrier in the range of 0.15-0.43 and the quantum-well width range from 30 to 60 $60{\AA}$. Design and fabrication of a QWIP based on $GaAs/Al_{0.23}Ga_{0.77}As$ structure with $37{\AA}$-thick well width has been carried out. The calculated operation wavelength of the QWIP is in a good agreement with the experimental data taken by photo response and activation energy calculation from thermal quenching of integrated photoluminescence.

• 한국재료학회지
• /
• 제8권5호
• /
• pp.419-423
• /
• 1998

매립형 InGaAnP/InP 레이저 다이오드 제작을 위한 질량 이동 현상의 최적화에 대한 연구를 수행하였다. Double heterostructure 레이저 다이오드 구조의 1차 성장은 액상 에피 성장 장치를 이용하였으며, 메사 에칭하였다. 활성층을 [110] 방향으로 선택적으로 에칭 한 후, 액상 에피 성장 장치를 이용하여 질량 이동 현상을 발생시켜 매립형 구조를 형성시켰다. 질량 이동 현상의 임계온도는 40분간 유지시켰을 때 $670^{\circ}C$로 나타났으며 재현성 있게 질량 이동 현상이 발생하였다. 질량 이동 현상에 의해 성장된 층의 폭은 온도증가에 따라 약간 증가하였다.