• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.462-468
• /
• 2010

A new course keeping controller for RIB(Rigid Inflatable Boat)-type USV(Unmanned Surface Vehicle) is developed using pilot's steering pattern. A pilot's simple steering pattern is found out from various course change tests. It is used to course keeping algorithm, suitable for large course change more than 60 degrees. To validate the course keeping controller, sea trial tests are conducted. From sea trial test, new course keeping controller shows good performance with less overshoot, maximum roll angle less than $20^{\circ}$, which makes it possible that fast course changes without slip motion of USV.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.631-638
• /
• 2003

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards are reviewed from the viewpoint of safe navigation. Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curved, narrow waterway by six operators(five active pilots and one ex-captain) in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMC criteria for yaw-checking and course-keeping ability are discussed and revised criteria are proposed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.585-598
• /
• 2021

The course-keeping stability of a high speed planing boat should be considered at the design stage for its safe operations. The shape of waterjet intake plane is one of important design parameters of a waterjet propelled planing boat. That has significant influences on the stern flow patterns and pressure distributions. In this study, the effects of the waterjet intake shapes of planing boats on the course-keeping stabilities are investigated. Two kinds of designed planing boats have the same dimensions, but there are differences in waterjet intake plane shapes. Captive and free-running model tests, Computational Fluid Dynamics (CFD) analyses are carried out in order to estimate their hydrodynamic performances including course-keeping stabilities. The results show that the flat and wide waterjet intake plane of the initially designed boat makes the course-keeping stability worse. The waterjet intake shape is redesigned to improve the course-keeping stability. The improved performances are confirmed by free-running model tests and full-scale trials.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.141-148
• /
• 2003

본 연구에서는 선박의 안전항해의 관점에서 IMO조종성기준 중 변침 및 보침 성능에 관해 검토하였다. 침로불안정의 정도가 각각 다른 세척의 시리즈선박을 채택하여 지그재그시험에 관한 수치시뮬레이션을 수행하여 침로불안정의 정도와 오버슈트각 사이의 관계를 규명하였다. 그 결과 오버슈트각은 변침 및 보침 성능의 기준이 될 수 있음을 확인하였다. 그리고 자체개발한 시뮬레이터를 활용하여 시리즈선박의 항로항행에 관한 실시간 시뮬레이션 실험을 수행하여 선박의 조종난이도와 침로불안정의 정도 사이의 관계를 규명하였다. 아울러 수치시뮬레이션과 시뮬레이션실험 결과를 토대로 IMO조종성기준의 변침 및 보침 성능에 관한 새로운 안을 제시하였다.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.54-60
• /
• 1998

일반적으로 선박의 보침성능을 평가하기 위해서 spiral test가 이용되고 있다. 그러나 spiral curve를 얻기 위한 spiral시험 및 역spiral시험에 있어서 바람과 파도 등의 영향으로 많은 어려움이 따른다. 따라서 spiral 시험을 하지 않고도, zig-zag test의 overshoot angle을 이용하여 선박의 보침성능을 판정하는 방법이 시도되고 있다. 본 연구에서는 실선의 spiral 시험결과를 대상으로, K-T 조종수학모델을 적용하여 zig-zag 운동을 계산하고, overshoot angle과 보침성능과의 상관관계를 조사하였다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 춘계학술대회논문집
• /
• pp.3-10
• /
• 2002

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards is reviewed from the viewpoint of safe operation. Three types of assumed series-ships, which have systematically different instability on course, are taken as tested models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in situation of curved, narrow of waterway by five pilots in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. Three kinds of IMO's criterion concerning yaw-checking and course-keeping ability are discussed and new criteria are proposed.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.18-22
• /
• 1999

One of the problem areas in designing a barge is its resistance and corese stability when it is towed by a tugboat. In this paper, as a part of design of a incinerating vessel, the results of some experimental studies on the effect of various kinds of anti-yawing skegs to the course keeping stability and on the additional resistance caused by them were summarized.

• Journal of Ship and Ocean Technology
• /
• 제6권3호
• /
• pp.26-36
• /
• 2002

Yaw-checking and course-keeping ability in IMO's ship rnanoeuvrability standards is reviewed from the viewpoint of safe navigation. Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curved, narrow waterway by five pilots in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMO criteria for yaw-checking and course-keeping ability are discussed and new criteria are proposed.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.95-99
• /
• 1997

In these days, the pollution of marine environment near island at Korean coastal zone caused by the trash human waste and livestocks excreata become intensified. One of the most economic and efficient way to prevent this pollution problem is to set up island circulating incineration system. In this paper, the result of feasibility study on the application of turtle boat hull form to the incinerating vessel has been summarized especially for the resistance and course keeping point of view.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.27-32
• /
• 2011

Recently, a ship-shaped barge has been developed to improve the resistance performance, as well as course-keeping capability. However, the stern of the barge is still similar to a box shape, and the vortex generated at the side of the barge creates drag and yaw instability. In order to solve this problem, stern skegs are normally used. The present paper deals with the correlation between the size of the stern skegs and the barge dimensions and hull coefficient. A stern skeg was designed to prevent yaw instability and minimize any additional resistance. The resistance test and course keeping test were performed in the towing tank at Pusan National University. To determine the correlation parameters between the designed stern skeg size and barge dimensions, a parametric study was also performed. Based on the experimental data from five barges, the optimum skeg dimensions were successfully derived. It is expected that the validation of the present study will be carried out by further experiments and computational comparisons in the near future.