• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.392-395
• /
• 2004

A coupler is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems it is highly desirable for monolithic integration of passive components as such LTCC(Low temperature cofired ceramics) technology offers potential advantage in size, cost and performance. Utilizing LTCC technology a 1608 size type dual band coupler for DCS and EGSM band was fabricated. Its characteristics such as coupling, insertion loss, isolation and directivity was measured and compared with simulation results.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.514-525
• /
• 2001

Optimum characteristics of digital X-ray sensor components were analyzed to develop intra- oral dental digital X-ray image sensor using indirect method. Parametric analysis was carried out to optimize the phosphor thickness and the fiber optic plate (FOP) coupling to charge coupled device (CCD). X-ray absorption and light diffusion in the phosphor layer were analyzed by the Monte Carlo method. Real time X-ray image was obtained with prototype X- ray image sensor using general CCD camera with 1∼10 Ip/mm resolution. It has been previously shown that large resolution degradation in X-ray images was caused by miss alignment of FOP to CCD and optical adhesive selection. In this study, we reported that X-ray image quality was greatly improved by using optimized characteristics of alignment device and phosphor thickness.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.485-489
• /
• 2004

We demonstrated numerically that both the chromatic dispersion and the dispersion slope could be compensated by using purely phase-sampled superstructure fiber Bragg gratings provided with chirp of coupling coefficient along the wavelength axis. Also, we propose a purely phase-sampled Bragg grating for dispersion and dispersion slope compensation by introducing a chirp in coupling coefficient and sampling function. The bandwidth of all reflected channels can be equalized.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1211-1218
• /
• 2017

In this paper, performance of rectangular shaped magnetic power pads for inductive power transfer (IPT) system according to ferrite structure is analyzed. In order to evaluate the influences of ferrite structure, six cases of magnetic power pads are proposed. Self-inductance, coupling coefficient, quality factor, and coil to coil efficiency are compared as the displacement increases in the direction of x or y axis. For accurate estimation, finite element method (FEM) simulation is used and loss components of the power pads are numerically calculated and considered. Through the simulation and measured results, effectiveness of protrusive and enveloping ferrite structure is identified.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.12
• /
• pp.1218-1229
• /
• 1991

The time optimal position control design can be repeatedly taken from the initial state of a dynamic system to a desired one as fast as possible in the industrial drives. In this case, an induction machine parameters will vary due to temperature, frequency, and saturation effects. In particular, the rotor resistance changes critically with temperature and frequency. These changes affect the command values of the stator current components and slip speed. There is a mismatch between the commanded variables and actual ones of the induction motor drive, and this situation leads to coupling of the vector controller from the plant, i.e. the induction motor . Consequences of such a coupling include the initiation of oscillations of the rotor flux and unsuitable switching of electromagnetic torque for the induction motor servo drive. Therefore, this paper describes a rotor resistance parameter compensating method for the induction motor, And the validity of the proposed design method is confirmed by simulation studies and experiment results.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.496-497
• /
• 2009

This paper describes about the realization of a remote RF sensor system and its applications. RF Sensor System was designed and realized on DSP over the range of high frequency such as about 200[KHz]. It should be "wireless", "implantable" and "batteryless". Futhermore, the system should be consist of passive components such as R, Land C. The measurement was given using the inductive coupling principle between primary source part and secondary sensor part. This newly developed parameter estimation system can be easily applied to the Ambient Intelligent System including the ubiquitous computing and the sensitive environmental changes.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.867-876
• /
• 2019

Second harmonic generation using nonlinear ultrasonic waves have been shown to be an early indicator of possible fatigue damage in nuclear power plant components. This technique relies on measuring amplitudes, making it highly susceptible to variations in transducer coupling and instrumentation. This paper proposes an experimental procedure for in-situ surface wave nonlinear ultrasound measurements on specimen with permanently mounted transducers under high cycle fatigue loading without interrupting the experiment. It allows continuous monitoring and minimizes variation due to transducer coupling. Moreover, relations describing the effects of the measurement system nonlinearity including the effects of the material transfer function on the measured nonlinearity parameter are derived. An in-situ high cycle fatigue test was conducted using two 304 stainless steel specimens with two different excitation frequencies. A comprehensive analysis of the nonlinear sources, which result in variations in the measured nonlinearity parameters, was performed and the effects of the system nonlinearities are explained and identified. In both specimens, monotonic trend was observed in nonlinear parameter when the value of fundamental amplitude was not changing.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.2
• /
• pp.53-59
• /
• 2009

Simulation Based Acquisition(SBA) which pursues to use M&S in manner of integrated collaboration is being applied in defense acquisition. To accomplish SBA efficiently, reusability, reconfiguration and scalability of M&S components are important factors. To avoid constraints caused by coupling of components, PBA is designed to add and configure components easily by enabling independent interface and interaction among the components and provides common development infrastructure also. And PBA framework is implemented to support the development of a simulator which uses the PBA. It is expected that deployment of PBA framework as common development infrastructure can raise efficiency of M&S works.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.373-376
• /
• 2003

A new method measuring soil resistivity in frequency range of 5-500[KHz] using variable frequency inverter was presented, and soil resistivity was analysed by resistive and reactive components on the basis of magnitude and phase of measured ground impedance. The test lead arrangement was proposed to reduce the inductive coupling in test circuit for measuring the soil resistivity. The frequency dependence of soil resistivity was mainly caused by the inductive current flowing through grounding conductors over the frequency of 70[KHz].

• Bulletin of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.525-528
• /
• 1996

Seven cali[4]arenes, having two different substituents in AAAB or AABB pattern at the upper rim of calix were synthesized by fragmentation condensation reaction of p-substituted phenol trimer (AAA) with 2,6-bishydroxymethylated 4-substituted phenol (B) or that of dimer (AA) with 2,2'-bishydroxymethylated dimer (BB). An equimolar mixture of the coupling components (trimer and monomer or dimer and dimer) was refluxed in dioxane in the presence of TiCl4to afford calix[4]arene 6 and 7 in 15-38% yield. The structure of calix[4]arenes was confirmed by elemental analysis and the 1H/13C NMR spectroscopy.