• 재활복지공학회논문지
• /
• 제11권1호
• /
• pp.63-71
• /
• 2017

본 논문에서는 달팽이관의 정원창 이식용으로 최근 새롭게 제안된 3코일 벨로우즈형 진동체(tri-coil bellows transducer, TCBT)를 이용하는 반이식형 인공중이(semi-implantable middle ear hearing device)를 위한 신호처리회로를 설계하였다. 설계된 반이식형 인공중이는 높은 효율을 가지는 유도결합 방법을 이용하여 귀 뒤편에 착용되는 체외기와 대응되는 피부 내측에 위치하는 체내기 간에 데이터를 전송한다. 귀 뒤 부위의 피부두께를 포함하는 반이식형 인공중이의 송수신 거리를 고려하여 송수신 코일과 신호처리 회로를 설계 및 구현하였다. 또한 데이터 전송 효율을 높이기 위하여, 전력을 충분히 증폭하기 위한 체외기의 출력부도 설계 하였다. 유도결합 방식을 이용한 반이식형 인공중이의 동작을 확인하기 위하여, PSpice를 이용하여 회로해석을 수행하였으며, 활용 가능한 크기의 신호처리 보드를 제작하여 그 성능을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1028-1034
• /
• 2011

본 논문에서는 파도의 상하운동에너지의 이용효율을 높이기 위해서 부양체와 2 D.O.F.(자유도) 진동발전시스템을 일체로 구성한 파력진동발전시스템을 제안한다. 파도가 갖는 상하운동 주파수 중 속도 에너지가 큰 주요 주파수 ${\omega}_1$, ${\omega}_2$을 선정하고, 2 D.O.F. 파력진동발전시스템의 고유진동수와 선정된 주파수들을 일치시킨다. 그러면 공진효과에 의해 각각의 질량과 권선사이의 상대속도가 파도의 상하운동속도보다 커진다. 또한 2 D.O.F. 진동시스템의 연성효과로 인한 1 D.O.F. 파력진동발전시스템보다 더 많은 전기에너지를 얻을 수 있다. 따라서 본 논문에서 제안한 2 D.O.F. 파력 발전시스템은 파도가 갖는 에너지를 더 많이 이용할 뿐만 아니라 더 많은 전기에너지를 얻을 수 있는 장점을 가짐을 알 수 있었다.

• 한국자기학회지
• /
• 제12권3호
• /
• pp.109-116
• /
• 2002

평면변압기의 설계방법 확립과 응용가능성을 파악하기 위해 입/출력전압이 70V/8.2V인 8W급 플라이-백 평면변압기를 설계하였다. 스위칭 주파수 120kHz에서 인덕턴스는 1650 $\mu$H로서 이론치의 약 85%~87%인 인덕턴스 효율을 나타내었고, 도전체의 교류저항은 주파수가 증가할수록 증가하여 스위칭파수 120 kHz에서 1차/2차 코일의 교류저항이 각각 3.9 $\Omega$, 0.16 $\Omega$이었고, 성능지수는 각각 158, 75로 나타났으며, 결합인자 k값은 스위칭 주파수 120 kHz에서 0.96~0.97 범위의 값을 나타내었다. 또한 자성체의 평면부분의 두께가 1.4mm까지는 인덕턴스가 평면두께가 증가할수록 큰 폭으로 증가하였고, 1.4mm이상의 두께에서는 거의 일정한 값을 나타내어 자성체의 임계 평면두께는 1.4mm로 나타났다. 그리고 70V의 입력 전압에 대하여 안정한 구형파의 출력 파형을 나타내었다.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.60-69
• /
• 1998

저온 플라즈마를 이용한 메탄 직접 전환반응은 진공에서 메탄만을 원료로 마이크로웨이브나 라디오 주파수(R.F)등의 에너지를 가하여 플라즈마 상태로 반응시켜 에틸렌, 에탄, 아세틸렌 등의 C2 화합물을 생성하는 방법이다. 이러한 직접적인 메탄 전환의 장점은 산소를 가하지 않으므로 산소에 의한 부생성물이 없는 점과 저온 플라즈마를 이용하므로 저에너지 공정이라는 것을 들 수 있다. 본 연구에서는 마이크로웨이브와 라디오 주파수(R.F)를 이용하여 저온 플라즈마 반응으로 메탄 전환반응을 수행하였고 일반적인 플라즈마 반응에 사용되는 관형반응기 외에도 독자적인 시리즈 반응기를 설계하여 성능실험을 수행하였다. 또한 플라즈마와 촉매를 이용한 반응실험을 수행 촉매의 영향을 확인하였다. 저온 플라즈마를 이용한 메탄 전환 반응의 특성을 분석한 자료는 공정의 실용화를 위한 반응기 설계 및 반응속도를 분석하기 위한 기초자료로 기대된다.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.10-17
• /
• 2021

This paper presents the robust design of each component used in the development of an induction bolt heating system for dismantling the high-temperature high-pressure casing heating bolts of turbines in power plants. The induction bolt heating system comprises seven assemblies, namely AC breaker, AC filter, inverter, transformer, work coil, cable, and CT/PT. For each of these assemblies, the various failure modes are identified by the failure mode and effects analysis (FMEA) method, and the causes and effects of these failure modes are presented. In addition, the risk priority numbers are deduced for the individual parts. To ensure robust design, the insulated-gate bipolar transistor (IGBT), switched-mode power supply (SMPS), C/T (adjusting current), capacitor, and coupling are selected. The IGBT is changed to a field-effect transistor (FET) to enhance the voltage applied to the induction heating system, and a dual-safety device is added to the SMPS. For C/T (adjusting current), the turns ratio is adjusted to ensure an appropriate amount of induced current. The capacitor is replaced by a product with heat resistance and durability; further, coupling with a water-resistant structure is improved such that the connecting parts are not easily destroyed. The ground connection is chosen for management priority.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2069-2070
• /
• 2011

In this paper, the fault diagnosis for a gearbox of BLDC motor. The stator of BLDC motor consists of coil winding so it is easy to cool down and it also has a high reliability. In addition, it doesn't have a brush so it is less trouble and good in maintenance. Coupling with the motor which is the power sources, the gear has a high power transfer efficiency and various rotation speed. The gear gets a high driving force through deceleration. Thus it has been widely used. The gearbox fault detection area has not attracted much attention from electrical engineering community. A few papers describe gearbox fault based on vibration. Gearbox fault is diagnosed through FFT analysis of current and voltage. Fault characteristic frequency side band detected by calculating fault frequency. A threshold value is suggested by comparing normal peak value with fault peak value using detected fault characteristic frequency side band. Experimental results demonstrate that motor current and voltage signal analysis are viable tools in detecting these gear faults. Lower side band(LSB) is bigger than upper side band(USB) in current FFT. LSB and USB are similar in voltage FFT. Finally, fault diagnosis system that can easily detect flaws is developted for gearbox of BLDC motor.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.213-217
• /
• 1992

An inductively coupled magnetical signal (pulse wave, 0.7 to 60Hz, eighteen volts peak to Peak) that was applied non-invasively on the skin surface overlying the approximate site(measure position). In the group with unipolar pulse signal currents produced smaller than in the group with bipolar pulse signal. The signal was transmitted to the active coil, including a time-varying magnetic field: this in turn induced a the-varying electrical field in the field in the bone. It is very important to determine system parameters due to treatment time(healing) and the simplicity. This paper investigation was designed to compare the relative effects of pulsed unipolar currents with the effects of an identical pulsed bipolar currents. Since Inductive coupling is non-invasive and involves portable equipment, it is easy to apply and requires precise localization, it has distinct advantages and field characteristics along the bone for each different signal.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.823-826
• /
• 2013

A low-${\varepsilon}$ solid-state NMR(Nuclear Magnetic Resonance) probe was developed for the spectroscopic analysis of two-dimensional $^{15}N-^1H$ heteronuclear dipolar coupling in dilute membrane proteins oriented in hydrated and dielectrically lossy lipid environments. The system employed a 800 MHz narrow-bore magnet. A solenoid coil strip shield was used to reduce deleterious RF sample heating by minimizing the conservative electric fields generated by the double-tuned resonator at high magnetic fields. The probe's design, construction, and performance in solid-state NMR experiments at high magnetic fields are described here. Such high-resolution solid-state NMR spectroscopic analysis of static oriented samples in hydrated phospholipid bilayers or bicelles could aid the structural analysis of dilute biological membrane proteins.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1147-1150
• /
• 2003

The RF inductive discharge or inductively coupled plasma (ICP) continues to attract growing attention as an effective plasma source in many industrial applications, the best known of which are plasma processing and lighting technology Although most practical ICPs operate at 13.56 (MHz) and 2.65 (MHz), the trend to reduce the operating frequency is clearly recognizable from recent ICP developments. In an electrodeless fluorescent lamp, the use of a lower operating frequency simplifies and reduces cost of rf matching systems and rf generators and can eliminate capacitive coupling between the inductor coil and plasma, which could be a strong factor in wall erosion and plasma contamination. In this study, the configuration of ferrite and fixture which operates at the frequency of 2.65 (MHz) will be discussed, by using the electromagnetic simulation (Maxwell 2D).

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.55-58
• /
• 2016

Quench Detection System (QDS) is essential to guarantee the stable operation of the Korea Superconducting Tokamak Advanced Research (KSTAR) Poloidal Field (PF) magnet system because the stored energy in the magnet system is very large. For the fast response, voltage-based QDS has been used. Co-wound voltage sensors and balanced bridge circuits were applied to eliminate the inductive voltages generated during the plasma operation. However, as the inductive voltages are hundreds times higher than the quench detection voltage during the pulse-current operation, Central Difference Averaging (CDA) and MIK, where I and K stand for mutual coupling indexes of different circuits, which is an active cancellation of mutually generated voltages have been suggested and studied. In this paper, the CDA and MIK technique were applied to the KSTAR magnet for PF magnet quench detection. The calculated inductive voltages from the MIK and measured voltages from the CDA circuits were compared to eliminate the inductive voltages at result signals.