• Title/Summary/Keyword: Coupled inductor

Search Result 200, Processing Time 0.024 seconds

Design of Non-isolated 2-stage Boost Converter Using Coupled Inductors (결합인덕터 방식을 이용한 비절연형 2단 부스트 컨버터 설계)

  • Kim, Kyu-Dong;Kim, Jun-Gu;Hwang, Sun-Hee;Won, Chung-Yuen;Jung, Yong-Chae
    • Proceedings of the KIPE Conference
    • /
    • 2011.07a
    • /
    • pp.25-26
    • /
    • 2011
  • In some cases of grid connected system using photovoltaic modules, high voltage step up ratio is required. In this paper, non-isolated 2-stage cascaded boost converter with coupled inductor is proposed. Due to reduce the input current ripple and size of the inductor by using coupled inductor method, this topology is suitable for MIC(Module Integrated Converter). The operational characteristic of the proposed topology is verified through the theorical analysis, simulation and experimental waveform.

  • PDF

A study on the ZVZCS(Zero-Voltage and Zero-Current-Switching) Full-Bridge converter using the secondary coupled inductor and auxiliary capacitor (2차측 결합인덕터와 보조커패시터를 이용한 영전압?영전류 풀브리지 컨버터에 관한 연구)

  • Kim, Dong-Won;Kim, Yong;Bae, Jin-Yong;Eom, Tae-Min;Lee, Dong-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.926-927
    • /
    • 2008
  • This paper presents the ZVZCS(Zero- Voltage and Zero-Current-Switching) Full-Bridge converter using the secondary coupled inductor and auxiliary capacitor. The converter with phase-shift control is proposed to reduce the circulating loss in primary and the voltage stress in secondary side. Using a coupled winding of the output inductor, two auxiliary capacitors are generated to reset the primary current at circulating interval.

  • PDF

A Study on the Secondary Rectification-Methods for the Three-Level Converter

  • Bae, Jin-Yong;Kim, Yong
    • Journal of Electrical Engineering and Technology
    • /
    • v.2 no.1
    • /
    • pp.81-88
    • /
    • 2007
  • This paper proposes a coupled inductor-based rectifier of a Three-Level (TL) DC/DC converter and compares the rectification methods of a TL converter. The CICDR- TL (Coupled Inductor Current Doubler Rectifier Three-Level) converter achieves ZVS (Zero Voltage Switching) for the switches in a wide load range. CDR (Current Doubler Rectifier) and CICDR Three-Level converter have low voltage and current ripple. Advantages and disadvantages of topology compared to the rectifier of bridge, center-tap, CDR, and CICDR are discussed. Experimental estimation results are obtained on a 27V, 60A DC/DC TL converter prototype for the 1.8kW, 40kHz IGBT based experimental circuit.

Sliding Mode Controller Applied to Coupled Inductor Dual Boost Inverters

  • Fang, Yu;Cao, Songyin;Wheeler, Pat
    • Journal of Power Electronics
    • /
    • v.19 no.6
    • /
    • pp.1403-1412
    • /
    • 2019
  • A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.

Development of a 7kW LDC for Heavy Hydrogen Electric Transport Vehicle Using Coupled Inductor (Coupled Inductor를 사용한 대형수소전기화물차용 7kW급 LDC 개발)

  • Heo, Gyeong Hyeon;Choi, Jin Yong;Choi, Seung Won;Lee, Il Oun;Lee, Jun Young;Song, Hyung Suk
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.263-264
    • /
    • 2019
  • 본 논문에서는 대형수소전기화물차용으로써 CI(Coupled Inductor)를 적용한 7kW급 LDC(Low-Voltage DC-DC Converter)를 제안한다. ZVS(Zero Voltage Switching)를 통한 소프트 위칭을 위해 위상천이(Phase shift) 방식으로 제어하고 SiC MOSFET을 사용함으로써 높은 스위칭 주파수와 역회복전류의 손실 저감을 통해 효율을 증대시킨다. 아울러 변압기를 2개로 나누어 자기 소자에 가해지는 부담을 줄이는 동시에 병렬 회로 사이에 CI를 연결하여 각 자기 소자 간의 전력 균형을 유지한다. 제안한 회로에 대한 실험 결과를 발표한다.

  • PDF

COMPLEMENTARY VHF CMOS ACTIVE INDUCTOR

  • Thanachayanont, A.;Ngow, S.Sae
    • Proceedings of the IEEK Conference
    • /
    • 2002.07a
    • /
    • pp.345-348
    • /
    • 2002
  • A complementary VHF CMOS active inductor is described. The proposed circuit employs 'p-type' and 'n-type' active inductor to obtain enlarged signal handling ability. Under the same inductance, Q value, and power consumption, the proposed circuit shows more than 12-㏈ improvement in dynamic range while maintaining high-frequency operation. Further enhancement is obtained by using a fully differential floating inductor structure. A 1-㎓ 4$\^$th/-order coupled-resonator filter is designed to demonstrate the potential of the proposed active inductor.

  • PDF

Design of T/R Switch Using LTCC Technology

  • Sim, Sung-Hun;Kang, Chong-Yun;Park, Ji-Won;Yoon, Young-Joong;Kim, hyun-Jai;Park, Hyung-Wook;Yoon, Seok-Jin
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.4
    • /
    • pp.375-379
    • /
    • 2003
  • In this paper, a novel design of multilayer ceramic-based Transmit/Receive (T/R) switch using Low Temperature Co-fired Ceramic (LTCC) technology have been presented. Compact T/R switch has been designed by transforming quarter-wave transmission line to its lumped equivalent circuit. Especially, high-Q three dimensional inductors with double strip have been proposed and incorporated. The proposed inductor has been modeled by multi-conductor coupled lines. A measured inductor quality factor (Q) of 80 and a Self-Resonance Frequency (SRF) of 6.6 GHz have been demonstrated. The inductor library has been incorporated into the design of WCDMA T/R switch.

Three-Level Zeta Converter using a Coupled Inductor (결합 인덕터를 이용한 3-레벨 Zeta 컨버터)

  • Lee, Seung-Jae;Yang, Min-Kwon;Heo, Jun;Choi, Woo-Young
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.21 no.3
    • /
    • pp.191-199
    • /
    • 2016
  • Conventional two-level Zeta converters have drawbacks, such as high voltage stresses and high current ripples. To address these problems, a three-level Zeta converter that uses a couple inductor is proposed in this study. The proposed converter utilizes the three-level power switching circuit to reduce the voltage stresses and inductor current ripples. Compared with the conventional converter, the proposed converter can improve power efficiency and power density. A 500 W prototype circuit is used to verify the operation and performance of the proposed converter via experimental results.

Small-Signal Analysis of Multi-Phase Interleaved Boost Converter with Coupled Inductor

  • Shin, Hwi-Beom;Jang, Eun-Sung;Chung, Se-Kyo;Lee, Hyun-Woo
    • Proceedings of the KIPE Conference
    • /
    • 2005.07a
    • /
    • pp.785-787
    • /
    • 2005
  • This paper addresses the small-signal analysis of the multi-phase interleaved boost converter with the coupled inductors operated in the continuous inductor current mode. The generalized and analytical expressions for the transfer functions of interest are derived for various inductor couplings. The dynamic characteristics are analyzed according to the inductor couplings and verified experimentally. The proposed frequency models will be very useful to design the dynamic controllers of the multi-phase interleaved boost converters.

  • PDF

Dual-Output Single-Stage Bridgeless SEPIC with Power Factor Correction

  • Shen, Chih-Lung;Yang, Shih-Hsueh
    • Journal of Power Electronics
    • /
    • v.15 no.2
    • /
    • pp.309-318
    • /
    • 2015
  • This study proposes a dual-output single-stage bridgeless single-ended primary-inductor converter (DOSSBS) that can completely remove the front-end full-bridge alternating current-direct current rectifier to accomplish power factor correction for universal line input. Without the need for bridge diodes, the proposed converter has the advantages of low component count and simple structure, and can thus significantly reduce power loss. DOSSBS has two uncommon output ports to provide different voltage levels to loads, instead of using two separate power factor correctors or multi-stage configurations in a single stage. Therefore, this proposed converter is cost-effective and compact. A magnetically coupled inductor is introduced in DOSSBS to replace two separate inductors to decrease volume and cost. Energy stored in the leakage inductance of the coupled inductor can be completely recycled. In each line cycle, the two active switches in DOSSBS are operated in either high-frequency pulse-width modulation pattern or low-frequency rectifying mode for switching loss reduction. A prototype for dealing with an $85-265V_{rms}$ universal line is designed, analyzed, and built. Practical measurements demonstrate the feasibility and functionality of the proposed converter.