• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.32.5-33
• /
• 2009

카네기 천문대에서 주도하여 개발 중인 구경 25.4m GMT 망원경 사업에 한국도 공식적으로 참여하였다. 현재 한국천문연구원은 GMT(Giant Magellan Telescope)부경부를 국내에서 개발하고자 이와 관련된 연구를 진행하고 있다. GMT 부경은 직경 1.06m 오목거울 7장이 모여 전체 직경 3.2m인 타원면을 형성하고 초점비는 F/0.7이다. GMT 부경개발 선행 연구과제로 카네기 천문대에서 개발되어 현재 운용중인 구경 6.5m 마젤란 망원경의 부경을 선택하였는데, 이는 마젤란 부경의 형상과 직경, 부경시스템 운영방식이 GMT 와 유사하기 때문이다. 천체관측 망원경에서 거울면의 변형에 가장 큰 영향을 미치는 인자는 거울의 자중이다. 거울의 직경이 커지면 자중이 증가하게 되어 거울면의 처짐이 커지게 된다. 이를 극복하고자 다양한 거울 support들이 개발되었다. 그중에서 counterweight lever 시스템 같은 부양(float) 시스템은 자중의 영향을 보상해 줌으로써 그것에 의한 거울의 변형을 최소화하는 역할을 하는데, GMT 부경 개발에 근간이 되는 마젤란 부경 또한 부양 시스템을 도입하였다. 마젤란 부경의 부양시스템은 counterweight lever 시스템과 유사한 진공 시스템을 도입하였다. 마젤란 부경의 support는 axial 방향으로 거울을 지지하는 axial support와 lateral 방향으로 거울을 지지하는 lateral support가 있는데, 이중에서 axial support가 진공시스템으로 구성된다. Lateral 방향의 지지는 경량화된 거울의 hole 안에 3개의 판스프링을 삽입하여 단지 거울과 판스링의 강성에 의해서만 이루어진다. 이 논문에서는 망원경이 작동을 할때 즉, 천정각(zenith angle)이 변할 때 axial support와 lateral support의 조합(combination)에 의해 지지되는 마젤란 부경의 표면 정밀도 RMS 값을 비교하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.239-253
• /
• 2000

영종대교는 2000년대 수도권 항공수요에 대비하여 영종도와 용유도 일원의 간석지에 건설되어, 인천국제공항과 인천 경서동을 연결하는 총연장 4,420m의 해상교량으로 현수교 3경간(550m), Truss교 18경간 (2,250m), 강상형교 27경간(1.620m)로 구성되어 있다. 영종대교는 10개 차선, 철도 2개 차선의 교량으로 건설된다. 교량이 건설되는 해역은 10,000ton급 선박의 통행이 가능하도록 교하공간 35m의 현수교를 계획 하였으며 경제성을 고려하여 Cable을 보강형에 정착시켰다. 미관을 고려한 경간 분할에 따른 교량의 부상을 방지하기 위하여 단부교각에 Link 구조를 설치하고 접속교를 Counterweight로 이용하였으며 Cable 장력이 저감되도록 Sag비를 1/5(=f/1)로 설정하였다.

• Structural Engineering and Mechanics
• /
• v.29 no.4
• /
• pp.381-390
• /
• 2008

This paper proposed a conceptual design of bascule bridge, which is a new kind of movable bridge with an aim of reducing the weight of superstructure. Compared with the traditional bascule bridge, the light bascule bridge chooses cable-stayed bridge with inclined pylon as its superstructure; therefore, the functions of balance-weight and structure will fuse into one. Otherwise, it adopts moving counterweight to adjust its center of gravity (CG) to open or close the bridge. In order to lighten the superstructure, it uses contact springs to auxiliary retract, and intelligent prestressing system (IPS) to control the main girder's deformation. Simultaneously the vibration control scheme of structure is discussed. Starting from establishing the mechanical model of bridge, this article tries to analyze the conditions that the design parameters of structure and attachments should satisfy to. After the design procedure was presented, an example was also adopted to explain the primary design process of this kind bridge.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.155-176
• /
• 2006

The purpose of this study was to explore the strategies for applying TRIZ to technology education. This study was carried out through literature review on contradiction, 40 principles, 76 standard solutions, multi screen method, effects, the law of technology evolution, and ARIZ, and questionnaire survey to investigate the validity. Through this study the strategies for applying TRIZ to technology education were proposed and the validity was identified. Only the '40 Principles' was appropriate to technology education of elementary and middle school. The results of this study were as follows; In elementary school technology education, segmentation, extraction, local quality, asymmetry, consolidation, universality, counterweight, do it in reverse, mediator, self service, dispose, flexible membranes or thin films, changing the color, homogeneity, rejecting and regenerating parts, and composite materials were suitable. And in middle school technology education, segmentation, extraction, local quality, asymmetry, consolidation, universality, counterweight, prior counteraction, prior action, cushion in advance, do it in reverse, dynamicity, partial or excessive action, continuity of useful action, convert harm into benefit, mediator, self service, dispose, flexible membranes or thin films, changing the color, homogeneity, rejecting and regenerating parts, transformation of properties, phase transition, thermal expansion, and composite materials were suitable.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.60-66
• /
• 2020

In this paper, we describe a rope tension automatic equalizer that automatically adjusts several rope tensions connecting the elevator car and the counterweight. The automatic rope tension equalizer is composed of a body, ram, and rope shaft. The body includes a cylinder hole, in which a ram is assembled. A rope shaft is assembled in a hole in the ram. Moreover, the rope is fixed to the rope shaft, with a hole through which fluid can pass between each cylinder hole and the hole of the body. The central concept is that the force of each rope is evenly distributed by the hydraulic pressure between the ram and the body cylinder when the rope is pulled. The thickness of the jaw connecting the small and large diameters of the body of the rope tension automatic equalizer was 15 mm based on structural analysis. The results of the representative experiment to install the produced rope tension equalizer on the elevator revealed it was possible to reduce the rope tension deviation by more than 71 kg.

• Journal of Korea Game Society
• /
• v.13 no.2
• /
• pp.143-154
• /
• 2013

This article explores on the deploying of game rating system in the context of whole game governance. Rating system is critical apparatus of game policy because it works as a kind of counterweight between different actors. We analyse to apply the three form of governmentality by Faucault. Rating system can be commonly considered as security mechanism. Korean rating system has hoped to be so but its effect was not actually. We should see why that system evolve to disciplinary mechanism, not toward security mechanism. Sound governance shows to be ensure all actors to participate its procedures practically, through constituting more rich discourse.

• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.583-594
• /
• 2018

A theoretical formulation based on the linearized potential theory, the Descartes' rule and the extremum optimization method is presented to calculate the critical distance of lifting points of the fully balanced hoist vertical ship lift, and to study pitching stability of the ship lift. The overturning torque of the ship chamber is proposed based on the Housner theory. A seven-free-degree dynamic model of the ship lift based on the Lagrange equation of the second kind is then established, including the ship chamber, the wire rope, the gravity counterweights and the liquid in the ship chamber. Subsequently, an eigenvalue equation is obtained with the coefficient matrix of the dynamic equations, and a key coefficient is analyzed by innovative use of the minimum optimization method for a stability criterion. Also, an extensive influence of the structural parameters contains the gravity counterweight wire rope stiffness, synchronous shaft stiffness, lifting height and hoists radius on the critical distance of lifting points is numerically analyzed. With the Runge-Kutta method, the four primary dynamical responses of the ship lift are investigated to demonstrate the accuracy/reliability of the result from the theoretical formulation. It is revealed that the critical distance of lifting points decreases with increasing the synchronous shaft stiffness, while increases with rising the other three structural parameters. Moreover, the theoretical formulation is more applicable than the previous criterions to design the layout of the fully balanced hoist vertical ship lift for the ensuring of the stability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.1
• /
• pp.148-156
• /
• 2000

For the in-line three cylinder engine whose crankshaft has a phase of 120 degrees, the total sum of unbalanced inertia forces occurring in each cylinder will be counterbalanced among three cylinders. However, parts of inertia forces generated at the No.1 and No.3 cylinders will cause a primary moment about the No.2 cylinder. In order to eliminate this out-of-balance moment, a single balance shaft has been attached to the cylinder block so that the engine durability and riding comfort may be further improved. Accordingly, the forced vibration analysis of the in-line three cylinder engine must be implemented to meet the required targets at an early design stage. In this paper, a method to reduce noise and vibration in the 800cc, in-line three cylinder LPG engine is suggested using the multibody dynamic simulation. The static and dynamic balances of the in-line three cylinder engine are investigated analytically. The multibody dynamic model of the in-line three cylinder engine is developed where the inertia properties of connecting rod, crankshaft, and balance shaft are extracted from their FE-models. The combustion pressure within the No.1 cylinder in three significant operating conditions(1500rpm-full load, 4000rpm-full load and 7000rpm-no load)is measured from the actual tests to excite the engine. The vibration velocities at three engine mounts with and without balance shaft are evaluated through the forced vibration analysis. Obviously, it is shown that the vibration of the in-line three cylinder engine with balance shaft is reduced to the acceptable level .

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.87-95
• /
• 2014

Cable stayed bridge is supported by cables and the negative reaction occurs by cables at anchor pier. To solve this problem, the proper side span ratio and the negative reaction measure of anchor pier are needed. And structural system of cable stayed bridge is determined by solution of the negative reaction as installation of the intermediate pier, counterweight and so on. In feasibility study, Vam Cong bridge was planned as 5 span cable stayed bridge. However, it was changed to 3 span cable stayed bridge in detailed design because of constructability and economy. The intermediate pier was excluded in order to improve the constructability, and side span ratio increased to control the negative reaction. As a result, Vam Cong bridge secure constructability, structural safety, and efficiency.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.145-151
• /
• 2019

In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.