• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.704-709
• /
• 2004

The wear behavior and the mechanical property of Cu-$TiB_2$ composites were examined. Cu-$TiB_2$ composites were fabricated by hot extrusion and cold drawing with $TiB_2$ contents(1$\∼$5vol.$\%$) and the size of $TiB_2$ particles(10$\mu$m and 20$\mu$m). The pin-an-disk wear test was carried out under dry sliding wear conditions which loads varied with from 20N to 100N. At the time, counterpart wear material used SM45C. The experimental results showed that the friction coefficient and wear rate decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle. Also, the depth of plastically deformed zone decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.12
• /
• pp.37-42
• /
• 1997

A new temperature and supply-insensitive CMOS current reference circuit was designed and tested. Te temperature insensuitivity was achieved by eliminating the mobility dependence term through the multiplication of two current components, one which is proportional to mobility and the other which is inversely proportional to mobility, by using a newly designed CMOS square root circuit. The CMOS sqare root circuit was derived from its bipolar counterpart by operating the MOS transistors in the subthreshold region. The supply insensitivity was achieved by using an internal voltage generator. Te test chip was designed ans sent out for fabrication by using a 2.mu.m double-poly double-metal n-well CMOS technology. When an external voltage source was used for the square root circuit, the maximum variation and the average temperature sensitivity were measured to be 3% and 21.4ppm/.deg.C, respectively, for the temperature range of -15~130.deg.C. The maximum current variation with supply voltage was measured to be 3% within the commerical supply voltage range of 4.5~5.5V at 30.deg. C.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.256-261
• /
• 2023

This study is conducted to evaluate the durability of superhydrophobic surfaces, with a focus on two aspects: contact angle measurement and self-cleaning-performance analysis. Superhydrophobic copper and aluminum surfaces are fabricated using the immersion method and subjected to a rolling wear test, in which a 2 kg weight is placed on a rolling tester, under loaded conditions. To evaluate their durability, the contact angles of the specimens are measured for each cycle. In addition, the surface deformation of the specimens before and after the test is analyzed through SEM imaging and EDS mapping. The degradation of the self-cleaning performance is evaluated before and after the wear test. The results show that superhydrophobic aluminum is approximately 4.5 times more durable than superhydrophobic copper; the copper and aluminum specimens could endure 21,000 and 4,300 cycles of wear, respectively. The results of the self-cleaning test demonstrate that superhydrophobic aluminum is superior to superhydrophobic copper. After the wear test, the self-cleaning rates of the copper and aluminum specimens decrease to 72.7% and 83.4%, respectively. The relatively minor decrease in the self-cleaning rate of the aluminum specimen, despite the large number of wear cycles, confirms that the superhydrophobic aluminum specimen is more durable than its copper counterpart. This study is expected to aid in evaluating the durability of superhydrophobic surfaces in the future owing to the advantage of performing wear tests on superhydrophobic surfaces without damaging the surface coating.

• Research in Community and Public Health Nursing
• /
• v.15 no.1
• /
• pp.76-83
• /
• 2004

Purpose: This study was aimed at investigating the relationship between retention of the maternal child health handbook, awareness of DPT additional immunization and DPT additional immunization, and to provide basic information to enhance the DPT additional immunization rate. Method: The study subjects were 312 women whose children were between four and six years old, and residing in six provinces of Gyungsangnam do. Data was collected with a 10 item questionnaire by interviews from July 1st to 30th, 2003, and analyzed with descriptive statistics and X2 test at a significance level of 0.05, by two tailed test. Results: The awareness of DPT additional immunization was significantly higher in the women who retained the maternal child health handbook, than their counterparts. The rate of DPT additional immunization was significantly higher in the women who were aware of the DPT additional immunization or who retained the maternal child health handbook, than their counterpart. Conclusion: The DPT additional immunization rate was related to retention of the maternal child health handbook and awareness of DPT additional immunization. Therefore it is recommended that measures be developed and taken to increase the retention rate of the maternal child health handbook and awareness of DPT additional immunization, to enhance the rate of DPT additional immunization.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.570-577
• /
• 2011

We developed insect-resistant GM rice(Bt transgenic rice) by inserting the mCry1Ac1 a modified gene from the soil bacterium, Bacillus thuringiensis. The Bt transgenic rice expressing the Bttoxin mCry1Ac1 was tested for the effects on survival of Misgurnus anguillicaudatus and Cyprinus carpio, commonly used as a model organism in ecotoxicological studies. M. anguillicaudatus and C. carpio fed 100% ground rice in suspension, using either Bt rice or non-GM counterpart rice(Nakdong). The Bt rice used for the test were confirmed to have the mCry1Ac1 gene expression by the immuno-strip and ELISA analysis. Feeding test showed that no significant differences in cumulative immobility and abnormal response of M. anguillicaudatus and C. carpio fed on between Bt rice and non-GM counterpart rice. The 96hr-LC₅₀ values showed no difference between Bt rice(>1,000mg/L) and non-GM rice(>1,000mg/L). We concluded that there was no significant difference in toxicity for non-target organisms(M. anguillicaudatus and C. carpio) between Bt rice and non-GM counterparts.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.1-17
• /
• 2008

The ordinary least squares regression method of Haseman and Elston(1972) is most widely used in genetic linkage studies for continuous traits of sib pairs. Kruglyak and Lander(1995) suggested a statistic which appears to be a nonparametric counterpart to the Haseman and Elston(1972)'s regression method, but in fact these two methods are quite different. In this paper the relationships between these two methods are described and will be compared by simulation studies. One of the characteristics of the sib-pair linkage study is that the explanatory variable has only three different values and thus dependent variable is heavily replicated in each value of the explanatory variable. We propose a weighted least squares regression method which is more appropriate to this situation and the efficiency of the weighted regression in genetic linkage study was explored with normal and non-normal simulated continuous traits data. Simulation studies demonstrated that the weighted regression is more powerful than other tests.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.2
• /
• pp.9-20
• /
• 2017

PURPOSE: The purpose of this study is to understand the difference in the risk factors of coronary artery disease (CAD) between Korean and American CAD patients to determine the discriminant factor for each group, as well as to provide useful information to be reflected in the national concern of health. METHODS: Data were collected from 248 Korean and 107 American CAD patients who underwent either percutaneous coronary intervention or coronary artery bypass grafting. By using t-test and $X^2$-test, risk factors were compared between the Koreans and Americans. To elucidate which risk factor was the most discriminant for each group, logistic regression analysis was performed. RESULTS: All risk factors, except diastolic blood pressure, showed a significant difference between the two groups. $X^2$-test showed statistical significance with respect to the smoking rate between the female groups. Moreover, there was a statistically significant difference between the two groups regarding blood total cholesterol (TC) and triglyceride, and between the male groups, here was a statistically significant difference with respect to blood high-density lipoprotein cholesterol (HDL). Diabetes mellitus (DM) was the most discriminant factor for Korean patients while TC/HDL is the most discriminant for the Americans. CONCLUSION: The characteristics of CAD risk factors were determined to be different between Koreans and Americans in this study. TC/HDL was a discriminant factor for Americans while DM was a discriminant factor for Koreans. This result implies that DM should primarily be given attention to prevent CAD in Korean adults.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.

• Earthquakes and Structures
• /
• v.26 no.5
• /
• pp.383-400
• /
• 2024

For a conventionally repaired frame-supported-transfer-slab (FSTS) reinforced concrete (RC) structure, both the transfer slab and the beam-to-column and transfer slab-to-column joints remain vulnerable to secondary earthquakes. Aimed at improving the seismic performance of a damaged FSTS RC structure, an innovative retrofitting scheme is proposed, which adopts the sector lead rubber dampers (SLRDs) at joints after the damaged FSTS RC structure is repaired by conventional approaches. In this paper, a series of quasi-static cyclic tests was conducted on a large-scale retrofitted FSTS RC structure. The seismic performance was evaluated and the key test results, including deformation characteristics, damage pattern, hysteretic behaviour, bearing capacity and strains on key components, were reported in detail. The test results indicated that the SLRDs started to dissipate energy under the service level earthquake, and thus prevented damages on the beam-to-column and transfer slab-to-column joints during the secondary earthquakes and shifted the plastic hinges away from the beam ends. The retrofitting scheme of using SLRDs also achieved the seismic design concept of 'strong joint, weak component'. The FSTS RC structure retrofitted by the SLRDs could recover more than 85% bearing capacity of its undamaged counterpart. The hysteresis curves were featured by the inverse "S" shape, indicating good bearing capacity and hysteresis performance. The deformation capacity of the damaged FSTS RC structure retrofitted by the SLRDs met the corresponding codified requirements for the case of the maximum considered earthquake, as set out in the Chinese seismic design code. The stability of the FSTS RC structure retrofitted by the SLRDs, which was revealed by the developed stains of the RC frame and transfer slab, was improved compared with the undamaged FSTS RC structure.

• Computers and Concrete
• /
• v.8 no.2
• /
• pp.207-227
• /
• 2011

In flexural strength design of unconfined reinforced concrete (RC) members, the concrete compressive stress-strain curve is scaled down from the uni-axial stress-strain curve such that the maximum concrete stress adopted in design is less than the uni-axial strength to account for the strain gradient effect. It has been found that the use of this smaller maximum concrete stress will underestimate the flexural strength of unconfined RC members although the safety factors for materials are taken as unity. Herein, in order to investigate the effect of strain gradient on the maximum concrete stress that can be developed in unconfined flexural RC members, several pairs of plain concrete (PC) and RC inverted T-shaped specimens were fabricated and tested under concentric and eccentric loads. From the test results, the maximum concrete stress developed in the eccentric specimens under strain gradient is determined by the modified concrete stress-strain curve obtained from the counterpart concentric specimens based on axial load and moment equilibriums. Based on that, a pair of equivalent rectangular concrete stress block parameters for the purpose of flexural strength design of unconfined RC members is determined.