• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.165-178
• /
• 2019

Mixed matrix membranes (MMMs) of poly (vinyl alcohol) (PVA) containing certain amounts of H-${\beta}$ zeolite for pervaporation were manufactured by using a solution casting protocol. These zeolite-embedded membranes were then characterized with scanning electron microscope (SEM), X-ray diffraction (XRD) and swelling tests. The membrane separation performance has been examined by means of isopropanol (IPA) dewatering from its highly concentrated aqueous solutions via response surface methodology (RSM). The results have demonstrated that the influences of feed IPA composition (85-95 wt.%), feed temperature ($50-70^{\circ}C$), zeolite loading (15-25 wt.%) and their interactive influences are all statistically significant on both pervaporation flux ($398-1228g/m^2{\cdot}h$) and water/isopropanol separation factor (617-2001). The quadratic models based on the RSM analysis have performed excellently to correlate experimental data with very high determination coefficients and very low relative standard deviations. The optimal pervaporation predictions given by using the RSM models demonstrate a total flux of $953g/m^2{\cdot}h$ and separation factor of 1458, and are excellently verified by experimental results. As reflected by these results, PVA MMMs embedded with hydrophilic $H-{\beta}$ zeolite entities have performed considerably better than its pure counterpart and indicated great potential for isopropanol dehydration applications.

• Advances in nano research
• /
• 제10권4호
• /
• pp.359-371
• /
• 2021

A tumor immune interaction is a main topic of interest in the last couple of decades because majority of human population suffered by tumor, formed by the abnormal growth of cells and is continuously interacted with the immune system. Because of its wide range of applications, many researchers have modeled this tumor immune interaction in the form of ordinary, delay and fractional order differential equations as the majority of biological models have a long range temporal memory. So in the present work, tumor immune interaction in fractional form provides an excellent tool for the description of memory and hereditary properties of inter and intra cells. So the interaction between effector-cells, tumor cells and interleukin-2 (IL-2) are modeled by using the definition of Caputo fractional order derivative that provides the system with long-time memory and gives extra degree of freedom. Moreover, in order to achieve more efficient computational results of fractional-order system, a discretization process is performed to obtain its discrete counterpart. Furthermore, existence and local stability of fixed points are investigated for discrete model. Moreover, it is proved that two types of bifurcations such as Neimark-Sacker and flip bifurcations are studied. Finally, numerical examples are presented to support our analytical results.

• Tribology and Lubricants
• /
• 제38권1호
• /
• pp.8-14
• /
• 2022

Amorphous carbon (a-C) has excellent wear resistance and, therefore is used as a coating to protect numerous mechanical components to prolong their lifetimes. Among the a-C coatings, diamond-like carbon (DLC) and DLC-containing silicon (Si-DLC) receive extensive attention owing to their enhanced wear resistance and low frictional characteristics. In this study, the friction and wear characteristics of DLC and Si-DLC coatings are analyzed. For comparative analysis, DLC-coated and Si-DLC-coated vanes are utilized with the counterpart of a roller for the friction tests. Since the lubricated mechanical components are generally vulnerable to wear when a lubricant film does not form properly, friction tests are conducted under boundary lubrication conditions to promote wear. A cylinder-on-cylinder type tribometer is used to perform the friction tests with various normal load conditions. After the friction test, a 3D laser confocal microscope is used for quantifying the wear volume to calculate the wear rate of each specimen. Consequently, the DLC-coated specimen shows a lower coefficient of friction (COF) and wear rate than the specimen without the coating, while the Si-DLC coating shows a higher COF than the bare specimen. The results of this study are expected to contribute to improving the efficiency and reliability of compressors.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 1996년도 10월 학술대회지
• /
• pp.514-514
• /
• 1996

Igbo, a new Benue Congo language has a vowel harmony system which, like that of Akan, is based on the pharynx size or tongue root position. In this study we examine Igbo vowel harmony with particular reference to assimilatory patterns of vowels in different harmony sets. This is to gain some insight into the factors involved in Igbo vowel assimilation, and to establish to what extent reports on Akan vowel assimilation are validated in Igbo. Tokens of the eight phonemic vowels of Standard Igbo are recorded from three native speakers of Igbo. The vowels are acoustically investigated (using the LPC analysis of CSL) in individual lexical items and within carefully designed carrier phrases. The F1 and F2 values of the vowels are obtained as these formant values are generally useful in establishing the salient characteristics of vowels. Vowels from the harmony sets are juxtaposed in the carrier phrases to ascertain the extent of assimilation. Results of the investigation show that the F1 values, to a large extend, are enough to characterize these vowels. The (-Expanded) vowels have higher F1 values than their (+Expanded) counterpart. Where there is an overlap in F1 values for some vowels the F1 bandwidth values serve to distinguish between the vowels. The overlap often reported in Akan for /I/ and /e/ on the one hand and /${\mho}$/ and /o/ on the other is not validated in Igbo. While the F1 values for these pairs of vowels are quite similar for one of our speakers, there is an appreciable difference between the F1 values of these vowels for the other two speakers. There is however an overlap for /e/ and /o/ for one of the speakers. Assimilations are generally regressive across word boundaries. It is, however, necessary to point out that the general perceptual impression that one of the vowels completely assimilates to the other, is not borne out by our investigation. Most of our F1 and F2 values for the vowels in individual lexical items are altered in assimilations. This then suggests that assimilation involving these vowels is partial rather than complete. The emerging 'allophones' are acoustically similar to the (+Expanded) vowel involved in the assimilation, that is when vowels from different harmony sets are involved. We conclude that while assimilation of Igbo vowels involves some phonological considerations, phonetic factors appear to be permanent in deciding the final form of the vowels.

• 자원리싸이클링
• /
• 제32권6호
• /
• pp.18-24
• /
• 2023

본 연구에서는 염소 바이패스 분진을 광물 탄산화하여 시멘트의 원료 및 콘크리트 혼화재로 적용하기 위한 초기 연구를 수행하였다. 염소 바이패스 분진의 물리적·화학적 특성을 확인하기 위해 수세 처리 유무 및 수세 횟수에 따른 XRD, XRF, 입도분포 분석을 수행하였으며 그에 따른 특성 변화를 확인하였다. 분진의 종류, 교반 온도, 시간 경과에 따른 염소 바이패스 분진의 광물 탄산화 결과 수세 미처리 샘플은 최대 24%이었으며 수세 처리 샘플은 27%이었으나 실험 조건에 따라 광물 탄산화의 속도 및 정도는 상이하였다. 수세 처리된 분진이 수세 미처리 분진에 비해 더 많은 광물 탄산화가 일어난 이유는 칼슘 함량이 더 높았기 때문이라고 판단되었다. 또한, 더 높은 교반 온도는 초기 광물 탄산화를 더 촉진시키지만 분진의 종류 및 시간 경과에 따라 상이한 결과가 도출되었다.

• Tribology and Lubricants
• /
• 제39권6호
• /
• pp.256-261
• /
• 2023

This study is conducted to evaluate the durability of superhydrophobic surfaces, with a focus on two aspects: contact angle measurement and self-cleaning-performance analysis. Superhydrophobic copper and aluminum surfaces are fabricated using the immersion method and subjected to a rolling wear test, in which a 2 kg weight is placed on a rolling tester, under loaded conditions. To evaluate their durability, the contact angles of the specimens are measured for each cycle. In addition, the surface deformation of the specimens before and after the test is analyzed through SEM imaging and EDS mapping. The degradation of the self-cleaning performance is evaluated before and after the wear test. The results show that superhydrophobic aluminum is approximately 4.5 times more durable than superhydrophobic copper; the copper and aluminum specimens could endure 21,000 and 4,300 cycles of wear, respectively. The results of the self-cleaning test demonstrate that superhydrophobic aluminum is superior to superhydrophobic copper. After the wear test, the self-cleaning rates of the copper and aluminum specimens decrease to 72.7% and 83.4%, respectively. The relatively minor decrease in the self-cleaning rate of the aluminum specimen, despite the large number of wear cycles, confirms that the superhydrophobic aluminum specimen is more durable than its copper counterpart. This study is expected to aid in evaluating the durability of superhydrophobic surfaces in the future owing to the advantage of performing wear tests on superhydrophobic surfaces without damaging the surface coating.

• Anatomy and Cell Biology
• /
• 제56권2호
• /
• pp.200-204
• /
• 2023

Although in counterpart, the sphenopalatine artery (SPA), has been well described in the medical literature, the sphenopalatine vein (SPV) has received scant attention. Therefore, the present anatomical study was performed. Additionally, we discuss the variations, embryology, and clinical significance of the SPV. Adult cadaveric specimens underwent dissection of the SPV. In addition, some specimens were submitted for histological analysis of this structure. The SPV was found to drain from the sphenoidal sinus and nasal septum. Small tributaries traveled through the nasal septum with the posterior septal branches of the SPA and nasopalatine nerve. The SPA and SPV were found to travel through the sphenopalatine foramen and another tributary was found to perforate the medial plate of the pterygoid process and to connect to the pterygoid venous plexus which traveled lateral to the medial plate of the pterygoid process. The vein traveled through the posterior part of the lateral wall of the nasal cavity with the posterior lateral nasal branches of the SPA and the lateral superior posterior nasal branches of the maxillary nerve. To our knowledge, this is the first anatomical study on the SPV in humans. Data on the SPV provides an improved anatomical understanding of the vascular network of the nasal cavity. Developing a more complete picture of the nasal cavity and its venous supply might help surgeons and clinicians better manage clinical entities such as posterior epistaxis, cavernous sinus infections, and perform endoscopic surgery with fewer complications.

• Journal of Microbiology and Biotechnology
• /
• 제27권5호
• /
• pp.1023-1031
• /
• 2017

The conformational change of cellular prion protein ($PrP^C$) to its misfolded counterpart, termed $PrP^{Sc}$, is mediated by a hypothesized cellular cofactor. This cofactor is believed to interact directly with certain amino acid residues of $PrP^C$. When these are mutated into cationic amino acid residues, $PrP^{Sc}$ formation and prion replication halt in a dominant negative (DN) manner, presumably due to strong binding of the cofactor to mutated $PrP^C$, designated as DN PrP mutants. Previous studies demonstrated that plasminogen and its kringle domains bind to PrP and accelerate $PrP^{Sc}$ generation. In this study, in vitro binding analysis of kringle domains of plasminogen to Q167R DN mutant PrP (PrPQ167R) was performed in parallel with the wild type (WT) and Q218K DN mutant PrP (PrPQ218K). The binding affinity of PrPQ167R was higher than that of WT PrP, but lower than that of PrPQ218K. Scatchard analysis further indicated that, like PrPQ218K and WT PrP, PrPQ167R interaction with plasminogen occurred at multiple sites, suggesting cooperativity in this interaction. Competitive binding analysis using $\small{L}$-lysine or $\small{L}$-arginine confirmed the increase of the specificity and binding affinity of the interaction as PrP acquired DN mutations. Circular dichroism spectroscopy demonstrated that the recombinant PrPs used in this study retained the ${\alpha}$-helix-rich structure. The ${\alpha}$-helix unfolding study revealed similar conformational stability for WT and DN-mutated PrPs. This study provides an additional piece of biochemical evidence concerning the interaction of plasminogen with DN mutant PrPs.

• 환경정책연구
• /
• 제8권3호
• /
• pp.53-79
• /
• 2009

최근 유럽연합(EU)은 새로운 화학물질 관리정책인 REACH 제도를 시행하였다. 본 연구는 유럽의 REACH 제도를 우리나라가 그대로 도입할 경우에 대한 비용 편익 분석이다. REACH 도입의 직접비용은 2006년 우리나라에서 제조 수입된 화학물질 15,223 종을 기준으로한 사전등록, 시험, 등록, 화학물질안전성평가 및 안전성보고서 작성 및 허가 비용을 포함하며, 2010년 도입 후 11년 동안 총 1조 124억원이 소요될 것으로 추정되었다. 편익은 국민건강 증진을 효과만 추정하였는데, 단순히 국민의료비만을 고려할 경우 3,317억원에서 1조 3,858억원, 질병회피에 대한 지불의사를 포함하면 20,394억원에서 164,027억원의 범위에 있었다. 즉 일반적으로 국민건강 편익은 지불의사를 포함하므로 우리나라의 REACH 도입은 타당성을 인정받았으나, 편익/비용 비율은 유럽에 비해 낮게 나타났다. 따라서 REACH 제도 도입을 긍정적으로 검토하되, 산업계의 비용을 줄이기 위한 별도의 제도설계가 필요하다.