• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E4호
• /
• pp.169-181
• /
• 2001

To test the compatibility of differential optical absorption spectroscopy (DOAS) and conventional in-situ monitoring technique we conducted a comparative analysis of the two systems using hourly measurement data sets of three criteria pollutants including No$_{2}$O$_{3}$, and SO$_{2}$ collected in months between April and June of 2001 at Sung Man city, Kyung Gi Province, Korea. The results of our comparative analysis were useful to evaluate the various aspects of DOAS performance, of particular the level of agreement with the counterpart method through computation of percent differences and correlation analysis. Interpretation of the mixing ratio data for those chemical species was however confined in terms of explaining the differences affected by the changes in environmental conditions because measurements of important meteorological parameters were limited during most of the study period. Nevertheless, the overall results of this study strongly demonstrated that the mixing ratio of major pollutants measured by the two different systems maintain strong compatibility from various respects.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.260-266
• /
• 2002

In this study, the effects of oxide layer farmed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with 1 ${\mu}{\textrm}{m}$ in coating thickness. AISI 52100 steel ball was used fur the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction(XRD), Auger electron spectroscopy(AES), scanning electron microscopy (SEM) and multi-mode atomic force microscope(AFM).

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.310-316
• /
• 2002

In this study, the effects of oxide layer formed on the wear tracks of TiN coated silicon wafer on friction and wear characteristics were investigated. Silicon wafer was used for the substrate of coated disk specimens, which were prepared by depositing TiN coating with $1{\mu}m$ in coating thickness. AISI 52100 steel ball was used for the counterpart. The tests were performed both in air for forming oxide layer on the wear track and in nitrogen to avoid oxidation. This paper reports characterization of the oxide layer effects on friction and wear characteristics using X-ray diffraction (XRD). Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and sliding tests.

• International Journal of Contents
• /
• 제6권4호
• /
• pp.101-107
• /
• 2010

I aim to discover that how greatly the curriculum of Life Dance department has had an effect on the career of students majoring in dance, with research objects being Life Dance department of two universities, located on the metropolitan area. The study method, called qualitative, includes some suggestions on the curriculum of the two and comparison, analysis of job-related materials; further, it involves discussion on the influence the curriculum has had on the career as dance trainers. The results from it are as follows; first, the curriculum of the department mostly consists of pure art such as Korean dance, modern dance, ballet, but has few creative life dance programs. Second, the employment into the art area has been more often than to the counterpart. Finally, it shows that a title of a department does not make a big difference and affect the employment rate. In conclusion, as the completion of the curriculum does not always guarantee a success, it is recommended that college students get some competent certificates related to dance.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.491-505
• /
• 1997

This paper deals with the formulation and solution of a wide class of structures, in the presence of both geometric and material nonlinearities, as a particular mathematical programming problem. We first present key ideas for the nonholonomic (path dependent) rate formulation for a suitably discretized structural model before we develop its computationally advantageous stepwise holonomic (path independent) counterpart. A feature of the final mathematical programming problem, known as a nonlinear complementarity problem, is that the governing relations exhibit symmetry as a result of the introduction of so-called nonlinear "residuals". One advantage of this form is that it facilitates application of a particular iterative algorithm, in essence a predictor-corrector method, for the solution process. As an illustrative example, we specifically consider the simplest case of plane trusses and detail in particular the general methodology for establishing the static-kinematic relations in a dual format. Extension to other skeletal structures is conceptually transparent. Some numerical examples are presented to illustrate applicability of the procedure.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.9-15
• /
• 2013

This paper presents a uniform analytical model by energy method and Fourier series expansion to analyze detent force in uneven magnetic field for permanent magnet linear synchronous motor (PMLSM). The model reveals that detent force in long-primary type is mainly influenced by non-ideal distribution of permanent magnet magnetic motive force, while nounified air-gap permeance makes a great impact on detent force of short-primary type. Hence, magnetic field similarity of motor design techniques referring rotary counterpart are adopted. For long-primary type novel method of splitting edge magnets is proposed to reduce end effects force, and optimal widths of edge tooth in short-primary type also verify the effectiveness of magnetic field similarity. The experimental results validate finite element analysis results.

• Tribology and Lubricants
• /
• 제26권2호
• /
• pp.122-128
• /
• 2010

Focused Ion Beam (FIB) has been used for site-specific TEM sample preparation and small scale fabrication. Moreover, analysis on the surface microstructure and phase distribution is possible by ion channeling contrast of FIB with high resolution. This paper describes FIB applications and deformed surface structure induced by sliding. The effect of FIB process on the surface damage was explored as well. The sliding experiments were conducted using high purity aluminum and OFHC(Oxygen-Free High Conductivity) copper. The counterpart material was steel. Pin-on-disk, Rotational Barrel Gas Gun and Explosively Driven Friction Tester were used for the sliding experiments in order to investigate the velocity effect on the microstructural change. From the FIB analysis, it is revealed that ion channeling contrast of FIB has better resolution than SEM and the tribolayer is composed of nanocrystalline structures. And the thickness of tribolayer was constant regardless of sliding velocities.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.34-41
• /
• 2001

Most of the eigenvalue analysis methods for the undamped or proportionally damped systems use the well-known Sturm sequence property to check the missed eigenvalues when only a set of the lowest modes is to be used for large structures. However, in the case of the non-proportionally damped systems such as the soil-structure interaction system, the structural control system and the composite structures, no counterpart of the Sturm sequence property for undamped systems has been developed yet. Hence, when some important modes are missed for those systems, it may leads to poor results in dynamic analysis. In this paper, a technique for calculating the number of eigenvalues inside the open disk of arbitrary radius for the eigenproblem with the damping matrix is proposed by applying Chen's algorithm and Gleyse's theorem. To verify the applicability of the proposed method, two numerical examples are considered.

• Nonlinear Functional Analysis and Applications
• /
• 제29권2호
• /
• pp.461-475
• /
• 2024

The concept of an extension α-F-contraction and it's modified counterpart represents an advancement in the theory of metric space contractions. Through our study of the contraction principles and it's relationship to extension and modified extension, we found different conditions somewhat lengthy. In our paper, we create a development of the conditions for the extension of α-F-contraction and a modified α-F-contraction by reducing the conditions and make them easier. Our propose conditions are notably simple and effective. They serve as the foundation for proving theorems and solving examples that belong to our study. Moreover, they have remarkable significance in the condition of mathematical analysis and problem-solving. Thus, we find that these new conditions that we mention in the definitions achieve what is require and through them, we choose λ = 1 and we choose λ ∈ (0, 1) to clarify our ideas.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.565-578
• /
• 2008

Purpose: Porphyromonas gingivalis(P. gingivalis) heat shock protein (HSP)60 may play a role in the immunopathogenesis of periodontitis as well as atherosclerosis by modulating autoimmune reaction due to its high level of sequence homology between bacteria and human counterpart. The purpose of this study was to identify immunodomiant epitope of P. gingivalis HSP60 that is reactive exclusively to the homologous bacteria without reacting with human HSP. Materials and methods: The present study was performed to identify the peptide specifically recognized by anti-P. gingivalis HSP60 monoclonal antibodies mono-reactive to P. gingivalis HSP60. Results: Four different hybridomas were cloned producing monoclonal IgG antibodies exclusively to P. gingivalis HSP60. Thirty seven synthetic peptides (20-mer with 5-amino acid overlapping) were synthesized. All of these peptide were subject to SDS-PAGE for immunblot analysis. One peptide (TVPGGGTTYIRAIAALEGLK) and the other peptide (TLVVNRLRGSLKICAVKAPG) were recognized by all and one of the four monoclonal antibodies, respectively, that reacted solely with P. gingivalis HSP60. Immunohistochemistry to identify the localization of the HSP60 in the diseased gingival tissues revealed that all of the four monoclonal antibodies were highly reacted with the diseased gingival tissue than normal gingival tissue. Conclusion: The P. gingivalis HSP60 peptides (TVPGGGTTYIRAIAALEGLK and TLVVNRLRGSLKICAVKAPG, respectively) are positively involved in the immunopathologic process of periodontal disease. The peptide may potentially be developed as vaccine candidates. Further investigations are under way to identify more clones producing monoclonal antibodies reactive to P. gingivalis HSP and to other periodontopathogenic bacteria as well, while maintaining specificities to human counterpart.