• 제목/요약/키워드: Coulomb Type

검색결과 64건 처리시간 0.03초

중력식 구조물의 형태에 따른 주동토압 산정과 설계법 제안 (The Calculation and Design Method of Active Earth Pressure with Type of Gravity Structures)

  • 김병일;정영진;김도형;이충호;한상재
    • 한국지반공학회논문집
    • /
    • 제30권4호
    • /
    • pp.47-63
    • /
    • 2014
  • 육상 및 항만 구조물 설계시 적용되고 있는 토압 이론(Rankine, Coulomb, 시행쐐기법, 개량시행쐐기법)을 정리하였고, 구조물 형태에 따라 가상배면(Vitural back, wall, plane)과 구조물 벽면에 작용하는 토압 특성 등을 제시하였다. 토압 특성을 검토하기 위해 육상구조물의 경우 배면토 경사에 따른 캔틸레버식 옹벽과 벽경사에 따른 중력식 옹벽, 해상구조물은 케이슨식 안벽과 블록식 안벽을 적용하였다. 여러 가지 토압이론을 적용하여 뒷굽 길이에 따른 토압, 작용각(벽면마찰각), 벽면측으로의 활동각 등을 분석한 결과 뒷굽이 긴 경우 가상배면에서의 작용토압은 Rankine 토압과 작용각은 지표경사각, 뒷굽이 짧은 경우 Coulomb 방법과 작용각은 벽마찰각으로 산정하는 것이 가장 합리적임을 알 수 있었다. 벽면측으로의 활동각은 Rankine 이론에 의한 활동각보다 큰 것으로 나타났다. 또한, 본 논문에서는 현재 적용되고 있는 여러 가지 토압 산정법 및 작용각 중에서 항만 구조물 설계시 적용할 수 있는 적정 토압 산정방법을 제안하였다. 제안방법은 뒷굽장단 결정과 이에 따른 적정 토압산정법을 결정하고 벽면 측으로의 활동각에 따른 옹벽자중 고려 방법을 설정하도록 하였다.

강-콘크리트 계면의 계면상수 결정 : 계면상수의 역학적 성질 (Determination of Steel-concrete Interface Parameters: Me chanical Properties of Interface Parameters)

  • 이타;주영태;이용학
    • 콘크리트학회논문집
    • /
    • 제21권6호
    • /
    • pp.781-788
    • /
    • 2009
  • 강-콘크리트 계면의 성질을 대표하는 부착강도, 부착 및 비부착 마찰계수, 부착 및 비부착 마찰계수의 연화영역에서 잔류량의 크기, 모드 I 파괴에너지, 부착 및 비부착 모드 II 파괴에너지, 파괴포락선의 형상계수를 포함한 총 9개 계면상수의 값을 계면거동실험결과와 파괴포락선의 기하학적 형상 및 구성모델을 이용하는 민감도 해석을 통해 결정하였다. 계면의 거동이 계면의 부착상태뿐만 아니라 계면법선방향 응력의 방향과 크기에 따라 매우 민감하게 작용하므로 계면상수 값의 결정에서는 이러한 구속압의 크기와 부착 및 비부착 계면조건을 고려하였다. 강재판 사이에 콘크리트가 타설된 강-콘크리트 계면실험체의 거동해석을 위한 계면유한요소해석을 결정된 계면상수를 적용하여 수행하였으며 실험결과와의 비교를 통해 상수값의 적정성을 검토하였다.

Dynamic impedance of a 3×3 pile-group system: Soil plasticity effects

  • Gheddar, Kamal;Sbartai, Badreddine;Messioud, Salah;Dias, Daniel
    • Structural Engineering and Mechanics
    • /
    • 제83권3호
    • /
    • pp.377-386
    • /
    • 2022
  • This paper considers dynamic impedance functions and presents a detailed analysis of the soil plasticity influence on the pile-group foundation dynamic response. A three-dimensional finite element model is proposed, and a calculation method considering the time domain is detailed for the nonlinear dynamic impedance functions. The soil mass is modeled as continuum elastoplastic solid using the Mohr-Coulomb shear failure criterion. The piles are modeled as continuum solids and the slab as a structural plate-type element. Quiet boundaries are implemented to avoid wave reflection on the boundaries. The model and method of analysis are validated by comparison with those published on literature. Numerical results are presented in terms of horizontal and vertical nonlinear dynamic impedances as a function of the shear soil parameters (cohesion and internal friction angle), pile spacing ratio and frequencies of the dynamic signal.

유한요소해석을 이용한 알루미나 정전척의 글라스 기판 흡착 특성 연구 (A Study on Attractive Force Characteristics of Glass Substrate Using Alumina Electrostatic Chuck by Finite Element Analysis)

  • 이재영;장경민;민동균;강재규;성기현;김혜동
    • 반도체디스플레이기술학회지
    • /
    • 제19권4호
    • /
    • pp.46-50
    • /
    • 2020
  • In this research, the attractive force of Coulomb type electrostatic chuck(ESC), which consisted of alumina dielectric, on glass substrate was studied by using the finite element analysis. The attractive force is caused by the high electrical resistance which occurs in contact region between glass substrate and dielectric layer. This research tries the simple geometrical modeling of ESC and glass substrate with air gap. The influences of the applied voltage, and air gap are investigated. When alumina dielectric with 1014 Ω·cm, 1.5 kV voltage, and 0.01 mm air gap were applied, electrostatic force in this work reached to 4 gf/㎠. This results show that the modeling of air gap is essential to derive the attractive force of the ESC.

탄소성(彈塑性) 지반(地盤)위에 놓인 원형평판(圓形平板)의 유한요소(有限要素) 해석(解析) (A Finite Element Analysis of Circular Plate Resting on Elasto-Plastic Soil Medium)

  • 김성덕;장승필
    • 대한토목학회논문집
    • /
    • 제7권4호
    • /
    • pp.91-102
    • /
    • 1987
  • Boussinesq 지반형(地盤型)의 탄소성체지반(彈塑性體地盤)위에 놓인 원형평판(圓形平板)이 축대칭하중(軸對稱荷重)을 받았을 경우의 거동을 파악하기 위하여 8절점(節點) 등매개변수요소(媒介變數要素)를 사용한 유한요소해석(有限要素解析) 방법(方法)을 이론적(理論的)으로 발전시키고 이를 수행하기 위한 컴퓨터 프로그램을 개발하였다. 이론(理論)의 정당성을 입증하기 위해 모형실험을 수행한 결과 지반(地盤)의 항복조건으로 Mohr-Coulomb 강복이론(降伏理論)을 적용한 수치해(數値解)의 결과(結果)와 실험결과(實驗結果)가 근사함을 확인하였다. Mohr-Coulomb의 파괴이론(破壞理論)을 적용한 비선형해석(非線型解析)을 수행한 예제(例題)의 결과로 부터, 지반의 소성영역(塑性領域)이 원판(圓板)의 녹단부근(綠端附近)에서 발생하기 시작하여 중심축둘레로 연결되었을 때 접지압(接地壓)이 급격히 변하여 전단파괴(剪斷破壞)의 위험성(危險性)이 있다고 판단되고 이 때의 외부작용하중(外部作用荷重)을 임계하중(臨界荷重)으로 정의하였다.

  • PDF

Generalization and implementation of hardening soil constitutive model in ABAQUS code

  • Bo Songa;Jun-Yan Liu;Yan Liu;Ping Hu
    • Geomechanics and Engineering
    • /
    • 제36권4호
    • /
    • pp.355-366
    • /
    • 2024
  • The original elastoplastic Hardening Soil model is formulated actually partly under hexagonal pyramidal Mohr-Coulomb failure criterion, and can be only used in specific stress paths. It must be completely generalized under Mohr-Coulomb criterion before its usage in engineering practice. A set of generalized constitutive equations under this criterion, including shear and volumetric yield surfaces and hardening laws, is proposed for Hardening Soil model in principal stress space. On the other hand, a Mohr-Coulumb type yield surface in principal stress space comprises six corners and an apex that make singularity for the normal integration approach of constitutive equations. With respect to the isotropic nature of the material, a technique for processing these singularities by means of Koiter's rule, along with a transforming approach between both stress spaces for both stress tensor and consistent stiffness matrix based on spectral decomposition method, is introduced to provide such an approach for developing generalized Hardening Soil model in finite element analysis code ABAQUS. The implemented model is verified in comparison with the results after the original simulations of oedometer and triaxial tests by means of this model, for volumetric and shear hardenings respectively. Results from the simulation of oedometer test show similar shape of primary loading curve to the original one, while maximum vertical strain is a little overestimated for about 0.5% probably due to the selection of relationships for cap parameters. In simulation of triaxial test, the stress-strain and dilation curves are both in very good agreement with the original curves as well as test data.

Robust Adaptive Control of A HexaSlide Type Parallel Manipulator

  • Kim, Jong-Phil;Kim, Sung-Gaun;Ryu, Jeha
    • Transactions on Control, Automation and Systems Engineering
    • /
    • 제3권4호
    • /
    • pp.262-267
    • /
    • 2001
  • Jeha Ryu Department of Mechatronics, Kwangju Institute of Science and Technology This paper presents an application of a robust adaptive control strategy to HexaSlide type six degrees-of-freedom parallel manipulators. The HexaSlide type parallel manipulators are characterized as an architecture with constant link lengths that are attached to moving sliders on the ground and to a mobile platform. The proposed control law is developed based on a simplified second order system dynamic equation in joint space with uncertain mass, damper, spring, and Coulomb friction terms. These uncertain parameters are updated by an adaptation law that is derived by Lyapunov stability theorem. A robust adaptive control law by using the boundary layer is designed for the purpose of compensating for the neglected dynamic effects of the mobile platform and the six moving links that are modeled as a disturbance term. Experimental results show good and fast tracking performance.

  • PDF

A Design Evaluation of Strained Si-SiGe on Insulator (SSOI) Based Sub-50 nm nMOSFETs

  • Nawaz, Muhammad;Ostling, Mikael
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제5권2호
    • /
    • pp.136-147
    • /
    • 2005
  • A theoretical design evaluation based on a hydrodynamic transport simulation of strained Si-SiGe on insulator (SSOI) type nMOSFETs is reported. Although, the net performance improvement is quite limited by the short channel effects, simulation results clearly show that the strained Si-SiGe type nMOSFETs are well-suited for gate lengths down to 20 nm. Simulation results show that the improvement in the transconductance with decreasing gate length is limited by the long-range Coulomb scattering. An influence of lateral and vertical diffusion of shallow dopants in the source/drain extension regions on the device performance (i.e., threshold voltage shift, subthreshold slope, current drivability and transconductance) is quantitatively assessed. An optimum layer thickness ($t_{si}$ of 5 and $t_{sg}$ of 10 nm) with shallow Junction depth (5-10 nm) and controlled lateral diffusion with steep doping gradient is needed to realize the sub-50 nm gate strained Si-SiGe type nMOSFETs.

Three-Dimensional Particle-in-cell Simulation of Electron Cyclotron Resonance Plasma with Belt-type Magnet Assembly

  • Lee, Hui Jea;Kim, Seong Bong;Yoo, Suk Jae;Cho, Moohyun;Namkung, Won
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.242.1-242.1
    • /
    • 2014
  • The electron cyclotron resonance plasma source with a belt-type magnet assembly (BMA) is designed for effective plasma confinements. For characterizing the plasma source, the plasma parameters are measured by Langmuir probe. However, the plasma parameters and the motion of charged particles near the ECR zone are not easy to diagnostics, because of the high plasma density and temperature. Thus, as an alternative method, the electromagnetic simulation of the plasma source has been performed by using three-dimensional particle-in-cell and Monte Carlo collisional (PIC-MCC) simulation codes. For considering the limitation of simulation resources and time, the periodic boundary condition is applied and the coulomb collision is neglected. In this paper, we present the results of 3D PIC simulations of ECR plasmas with BMA and we compare them with the experimental results.

  • PDF

마찰이 존재하는 픽업 구동기의 포커싱 서보 시스템 (Focusing Servo System in Pickup Actuator with friction)

  • 이정현;한창수;원종화;윤형덕;김수현;곽윤근
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.346-350
    • /
    • 1996
  • In optical disk drives, one of commonly used pickup actuator is a Sliding and rotary type of pickup actuator which is cheaper than other pickup actuators and has simple assembly. However, it reported that non-linearity due to friction between a shaft and a sleeve had to be considerably analyzed in design and servo system in employing this type of pickup actuator. In this paper, this friction is modeled as a Coulomb's friction and the effect of friction is examined in the simulation. A digital servo system is applied to pickup actuator with friction in order to have good focusing servo. To enhance focusing servo performance using digital servo merit, frist PD-controller is applied to have fast response performance, second lead-lag compensator is applied to have stable focusing performance.

  • PDF