• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.105-109
• /
• 2010

Nowadays, the construction of high-rise building is rapidly increasing. There are many cost-increasing factors to the management in the high-rise building construction. For large and complex projects like the high-rise building construction, the more systematic methods and tools are needed for cost control. It is important to identify major cost control items and to manage them for effective cost management in the high-rise building construction. This study proposes a method of identifying major cost-increasing factors in the high-rise building construction based on the Delphi method.

• 에너지공학
• /
• 제22권3호
• /
• pp.283-286
• /
• 2013

전력사업자의 요청, 경제적인 요인 또는 기타 요인에 따라 기존 발전소의 설계개념 변경 없이 발전소의 전기출력을 증가 또는 감소시켜 발전소를 재설계하는 경우가 종종 있다. 이때 노심출력 및 전기출력을 변경시켜 재설계되는 발전소의 설비들의 가격을 예측할 경우, 시장에서 견적을 받을 환경이 아닐 경우에는 기존발전소 설비들의 가격에 비용보정계수(Cost Scaling Factor)를 적용하여 새로 설계되는 발전소 설비들에 비용들을 계산할 수 있다. 이에 미국의 DOE, EPRI, ABB, SWEC 기관들의 발전소 용량변경에 따른 비용보정계수를 검토하고, 그것을 국내 PWR 1000MWe, 1400MWe에 적용한 결과를 소개하고자 한다.

• 한국건설관리학회논문집
• /
• 제13권3호
• /
• pp.14-24
• /
• 2012

최근 세계 건설시장에서의 발주방식은 빠른 속도로 변화하고 있으며, 이에 대한 건설 사업도 대형화 및 고난이도 공사가 증가하고 있다. 이러한 사업의 많은 부분이 설계시공일괄방식 사업으로 발주 되고 있으며, 공사금액기준으로 2009년 국내 조달청 발주공사의 약 40%를 일괄입찰방식(Design-Build)으로 발주를 하고 있다. 반면 설계시공일괄방식 사업의 증가로 그 중요성은 강조되지만, 사업수행자의 사업비용 관리차원에서 기대이상의 성과를 얻지 못하고 있는 실정이다. 그 이유는 사업방식의 특성상, 기본설계 이후 사업 수행계약이 체결되며, 관련 신기술 및 공법 적용에 대한 발주 검토 미흡과 설계과정에서의 불충분한 협의 등으로 사업비용(Cost) 증가에 대한 리스크가 상존하기 때문이다. 이를 해결하기 위해 사업수행 과정에서 사업비용의 증가 원인에 대한 요인을 찾고, 전체 사업 업무단계(Business Process)에서 리스크요인(Risk Factor)에 대한 우선순위 선정과 긴밀한 관리가 필요하다. 따라서 본 연구는 설계시공일괄방식 사업의 특성과 관련한 문제점을 근거로 사업비용에 대한 업무단계별 중요도를 분석하고, 사업수행자 측면의 업무단계별 사업비용 증가에 대한 리스크요인을 도출하여, 그에 대한 영향도(Impact assessment)를 FMEA(Failure Mode and Effect Analysis)기법을 통해 평가하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권10호
• /
• pp.501-507
• /
• 2001

In this paper, new high-efficiency zero voltage switching (ZVS) AC-DC boost converter is proposed to achieve power factor correction by simplifing energy recovery circuit. A lot of high power factor correction circuits have been proposed and applied to increase input power factor and efficiency. Most of these circuits may obtain unity power factor and achieve sinusoidal current waveform with zero voltage or/and zero current switching. However, it is difficult for them to obtain low cost, small size, low weight, and low noise. The topology proposed to improve these problems can compact the devices in circuit and can achieve high efficiency ZVS AC-DC boost converter. Simulation and experimental results show that this topology is capable of obtaining high power factor and increasing the efficiency of the system.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.7-14
• /
• 2016

Unlike most researches that focus on single manufacturer or single buyer, this research studies the cooperation policy for two participants of supply chain such as single vendor and single buyer. Especially, this paper deals with single vendor-single buyer integrated-production inventory problem. If the buyer orders products, then the vendor will start to make products and then the products will be shipped from the vendor to the buyer many times. The buyer is supposed to order again when the buyer's inventory level hits reorder point during the last shipment and this cycle keeps repeated. The buyer uses continuous review inventory policy and customer's demand is assumed to be probabilistic. The contribution of this paper is to present a mixed approach and derive its cost function. The existing policy assumes that the size of shipping batch from single vendor to single buyer is increasing, called Type 1, or constant, called Type 2. In mixed approach, the size of shipping batch is increasing at the beginning part of the cycle, and then its size is constant at the ending part of the cycle. The number of shipping for Type 1 and Type 2 in a cycle in mixed approach is determined to minimize total cost. The relationship between parameters, for example, the holding cost per product, the set up cost per order, and the shortage cost per item and decision variables such as order quantity, safety factor, the number of shipments, and shipment increasing factor is figured out via sensitivity analysis. Finally, it is statistically proved that the mixed approach is superior to the existing approaches.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.312-314
• /
• 1997

In this paper, Computer Aided Optimum Design Technique for Three-Phase Induction Motors is proposed. In the technique, reference magnetic flux, specific electric loading factor, specific magnetic loading factor(magnetic flux density) and current density are adopted as design parameters, and minimum total cost including material cost and loss power cost is adopted as a objective function which has to satisfy output condition too. As a result of application to the existing motor, it is proved that this technique is very effective in view of gradually increasing energy costs.

• 자원ㆍ환경경제연구
• /
• 제22권2호
• /
• pp.367-391
• /
• 2013

후쿠시마원자력발전소의 사고를 계기로 원전의 안전대책비용, 사고위험대응비용과 같은 외부비용들의 존재가 부각되고 있다. 이에 본 연구는 원전의 외부비용들 중에서 추가안전대책비용과 사고위험대응비용을 추정하고, 이를 발전원가 및 전기요금에 반영하여 변화정도를 살폈다. 원전의 추가안전대책비용은 70~90%의 이용률에서 0.53원/kWh~0.80원/kWh으로 원전의 발전원가에 큰 영향을 미치지는 않는다. 사고위험대응비용은 원전사고피해규모별, 사고발생빈도별, 이용률별로 0.0025원/kWh~26.4188원/kWh로 추정되었다. 사고위험대응비용을 포함시키면 원전발전원가는 47.58원/kWh~85.92원/kWh가 된다. 2011년을 기준으로 사고위험대응비용을 내부화한 경우의 전기요금의 증가율은 70~90%의 이용률에서 0.001%~10.0563% 로 추정되었다. 본 연구는 원전의 외부비용을 내부화하는 방법으로서 외부비용을 발전원가에 포함하여 전기요금에 반영하였다. 본 연구는 지금까지 우리나라에 논의되지 않았던 원전 외부비용을 내부화하는 방법의 하나가 될 것이다.

• 보건행정학회지
• /
• 제2권2호
• /
• pp.221-237
• /
• 1992

The reasons for cost inflation in medical insurance expenditure are classified into demand pull inflation and cost push inflation. The former includes increase in the number of beneficiaries and utilization rate, while the latter includes increase in medical insurance fee and the charges per case. This study was conducted to analyze sources of increases of expenditure in medical insurance demonstration area by the period of 1982-1987 which was earlier than national health insurance and the period of national health insurance(1988-1990). The major findings were as follows: Medical expenditure in these areas increased by 9.4%(15.1%) annually between 1982 and 1990 on the basis of costant price(current price) and for this period, the yearly average increasing rate of expenses for outpatient care[10.5%(15.8%)] was higher than that of inpatient care [7.3%(12.6%)]. Medical expenditure increased by 6.3%(8.9%) annually between 1982 and 1987, the period of medical insurance demonstration, while it increased by 10.7%(18.9%) after implementing national health insurance(1988-1990). Medical expenditure increased by 35.9%(45.9%) between 1982 and 1987. Of this increase, 115.2%(92.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 61.0%(68.1%) was due to the increase in the charges per case, but the expenditure decreased by 76.2%(60.2%) due to the reduction in the number of beneficiaries. Beteen 1988 and 1990, the period of national health insurance, medical expenditure increased by 21.2%(41.4%). Of this increase, 87.5%(46.4%) was attributable to the increase in the frequencies of utilization per beneficiary and 52.4%(73.4%) was due to the increase in the charges per case, and of the increase in the charges per case, 69.6%(40.8%) was attributable to the increase in the days of visit per case. Medical expenses per person in these areas increased by 78.2%(89.0%) between 1982 and 1987. Of this increase, 76.6%(69.1%) was attributable to the increase in the frequencies of utilization per beneficiary and 23.4%(30.9%) was due to the increase in the charges per case. For this period, demand-pull factor was the major cause of the increase in medical expenses and the expenses per treatment day was the major attributable factor in cost-push inflation. Betwee 1988 and 1990, medical expenditure per person increased by 31.2%(53.1%). Of this increase, 60.8%(37.2%) was attributable to the demand-pull factor and 39.2%(62.8%) was due to the increase in the charges per case which was one of cost-push factors. In current price, the attributalbe rate of the charges per case which was one of cost-push factors was higher than that of utilization rate in the period of national health insurance as compared to the period of medical insurance demonstration. In consideration of above findings, demand-pull factor led the increase in medical expenditure between 1982 and 1987, the period of medical insurance medel trial, but after implementing national health insurance, the attributable rate of cost-push factor was increasing gradually. Thus we may conclude that for medical cost containment, it is requested to examine the new reimbursement method to control cost-push factor and service-intensity factor.

• 한국수자원학회논문집
• /
• 제36권1호
• /
• pp.61-74
• /
• 2003

본 연구(II)는 연구(I)에서 제안한 상수관로의 노후도 예측에 근거한 최적 개량 모형을 A시를 대상으로 이를 적용하였다. 노후도 예측 모형은 굴착 및 실험이 필요한 14개 항목과 굴착 및 실험이 필요하지 않은 9개 항목을 구분하여 각각 관의 노후도 등급을 산정하였다. 노후도 예측 모형 적용 결과 항목개수에 따른 등급의 차는 l~2% 이내로 굴착 및 실험을 하지 않고도 노후도 예측이 가능한 것으로 나타났다. 최적 개량 모형은 노후도 항목별 최대 잔존수명과 제약조건 유무로 구분하여 적용하였다. 적용결과 항목별 최대 잔존수명의 증가에 따라 개량 시기 및 비용이 증가하였다. 또한 예산제약을 제외한 모형과 비교해서 예산제약을 고려한 모형이 모든 항목에서 비용이 증가되었다. 이는 예산제약을 고려할 경우 실제 주어진 최대 잔존수명 기간이내 매년 발생하는 예산의 최대 금액을 넘지 않은 대신에 매년 비슷한 비용으로 개량을 실시하기 때문인 것으로 판단되었다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.82-85
• /
• 1987

This paper describes the technology for the improvement of subxdriber loop utilization. Nearly all customer loops are now carried at voice frequency on individual wire pairs. Reenct digital technology improvements together with the increasing cost of wire, have resulted in some penetration of carrier systems into the loop plant. Moreover the increasing use of local digital switching systems should permit digital carrier systems to become an important factor in the loop plant in the future.