• 산업경영시스템학회지
• /
• 제18권34호
• /
• pp.155-159
• /
• 1995

For the relationship between conformance cost and the individual elements of non-conformance, an analysis was made of the relationship between inspection cost and training cost and scrap cost. As a result it was explained that there was all a positive correlation between training cost and scrap cost, and between inspection cost and scrap cost. Like this, training and inspection cost and scrap cost have a positive correlation. Judging from the fact that the coefficient of inspection cost is lower than that of training cost in the comparison of the coefficient of each cost, it can be analyzed that the change in scrap cost is influenced by the change in training cost more greatly than the change in inspection cost. If doing so, it can be interpreted that scrap cost and rework cost do not still decrease in spite of increasing in education and training cost and prevention cost. This result may represent the problem as to whether education and training cost is effectively expended for prevention activity. Accordingly, to cope with this situation, it is thought that scrap cost should be cut by establishing the effective prevention measure for causing the increase of scrap cost.

• 한국실천공학교육학회논문지
• /
• 제2권1호
• /
• pp.146-153
• /
• 2010

ET 헬스기구에서 적용되는 이론은 공학교육에 좋은 예제가 될 수 있다. 물리교육학적 고찰에 의한 역학적 및 열적 에너지 소비량을 측정하여 에너지 소비량과 근육활성도의 관계, 운동량과 에너지 소비량의 관계, 그리고 에너지 소비량과 대사 소비량의 관계를 알아보았다. 에너지 소비량과 근육활성도의 조사에서 단시간동안 체중감량을 위해서는 고속으로 운동하는 것이 효과적이지만 근육활성도를 높여 기초 대사량을 높이기 위해서는 저속도 운동이 효과적이었다. 운동량과 유산소 에너지 소비량의 조사에서는 ET를 사용하여 유산소운동을 할 경우 효과가 높음을 알 수 있었고 유산소운동을 함으로써 체중을 줄이는 것이 효과적임을 알 수 있었다. 에너지 소비량과 대사 소비량의 조사에서는 고속으로 ET운동하여 체중은 더 줄어든다 하더라도 역학적에너지 소비율은 저속일 때와 별로 차이가 없었다.

• Journal of Animal Science and Technology
• /
• 제62권6호
• /
• pp.933-947
• /
• 2020

This study was conducted to develop an effective heparin extraction method by using low-cost and highly effective enzymes from six pig by-products (liver, lung, heart, stomach, small intestine, and large intestine), and analyze their bioavailability. Low-cost and highly effective enzymes (alkaline-AK and papain) and a common enzyme (trypsin) were used for the heparin extraction. The angiotensin I- converting enzyme (ACE) inhibitory activity and the antimicrobial activity of extracted heparin were analyzed to verify their bioavailability. The average amount of heparin extracted per kilogram of pig by-products was 439 mg from the liver, 127 mg from the lung, 398 mg from the heart, 261 mg from the stomach, 197 mg from the small intestine, and 239 mg from the large intestine. Various enzymes were used to extract heparin, and the amount of extracted heparin was similar. Based on 1 g of pig by-product, the enzymes trypsin, papain, and alkaline-AK could extract 1,718 mg, 1,697 mg, and 1,905 mg of heparin, respectively. Heparin extracted from pig by-products showed antihypertensive activity and antimicrobial activity against Staphylococcus aureus at low populations. These results indicated that heparin can be obtained from pig by-products at a low cost.

• 품질경영학회지
• /
• 제43권1호
• /
• pp.85-102
• /
• 2015

Purpose: This study is aimed to develope effective guidelines of R&D institute with regard to general management cost, by analyzing the management characteristics of 14 domestic R&D institutes general management costs. Methods: The bootstrapping method is applied to obtain the average general management cost of 14 R&D institute and the effective R&D institutes are presented by comparing the general management costs of R&D and the rate of inflation. Results: The results show that the average R&D general management cost of 14 R&D institutes is 3.32% and, in general, it turns out that the R&D general management costs do not reflect the inflation rate after a comparative analysis of the variation of the R&D general management costs. In addition, the results of cost-effective analysis show that only 5 R&D institutes are efficient in R&D activities. Conclusion: Applying a uniform standard of R&D general management costs although their management characteristics are different, can cause the impediment to the independence and transparency of R&D institutes. Therefore it is recommended a strict implementation with respect to the monitoring system of each R&D institute and the budget policy methods which are reflected management characteristics.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.49-69
• /
• 2018

This paper shows an optimal design for reinforced concrete rectangular combined footings based on a criterion of minimum cost. The classical design method for reinforced concrete rectangular combined footings is: First, a dimension is proposed that should comply with the allowable stresses (Minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity withstand by the soil); subsequently, the effective depth is obtained due to the maximum moment and this effective depth is checked against the bending shear and the punching shear until, it complies with these conditions, and then the steel reinforcement is obtained, but this is not guaranteed that obtained cost is a minimum cost. A numerical experimentation shows the model capability to estimate the minimum cost design of the materials used for a rectangular combined footing that supports two columns under an axial load and moments in two directions at each column in accordance to the building code requirements for structural concrete and commentary (ACI 318S-14). Numerical experimentation is developed by modifying the values of the rectangular combined footing to from "d" (Effective depth), "b" (Short dimension), "a" (Greater dimension), "${\rho}_{P1}$" (Ratio of reinforcement steel under column 1), "${\rho}_{P2}$" (Ratio of reinforcement steel under column 2), "${\rho}_{yLB}$" (Ratio of longitudinal reinforcement steel in the bottom), "${\rho}_{yLT}$" (Ratio of longitudinal reinforcement steel at the top). Results show that the optimal design is more economical and more precise with respect to the classical design. Therefore, the optimal design presented in this paper should be used to obtain the minimum cost design for reinforced concrete rectangular combined footings.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권2호
• /
• pp.87-98
• /
• 2012

최근 Wi-Fi 기능이 내장된 휴대용 장비가 제공하는 다양한 자료와 멀티미디어 서비스가 점점 늘어나고 있으며, 어디서든 인터넷에 접속하려는 전반적인 요구가 급격히 증가하고 있다. 이에 따라 네트워크에 많은 비용 부담이 증가하고 있다. 따라서, 모바일 네트워킹에 관한 최근의 연구 중 에너지 효율적인 네트워크 이동성 기술은 큰 주목을 받고 있다. 네트워크 이동성 환경에서 비용 효율적인 프로토콜 설계는 이동성 시그널링과 패킷 전달, 그리고 비용 효율성의 중요한 이슈 중의 하나인 유, 무선에서 제한된 네트워크 대역폭을 절약하여 불필요한 비용을 감소시키는 것이다. 본 연구에서는 기존의 네트워크 이동성 기법에 멀티캐스팅을 지원하는 고속 핸드오버, 효율적인 도메인간 이동성 관리와 패킷 전달 메소드를 제공하는 비용 효율적인 기법을 제안한다. 본 논문에서는 위치 갱신 비용과 패킷 터널링 비용을 합한 총 비용의 관점으로 기존의 NEMO 기법인 N-PMIPv6, rNEMO, PR-NEMO의 성능과 새롭게 제안하는 Fast PR-NEMO의 성능을 비교 분석하고, 제안된 기법이 기존 제안된 기법들에 비해 총 비용이 낮은 가장 에너지 효율적인 방식임을 증명한다.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.182-186
• /
• 2011

Early cost estimates are important to decision-making for a construction project. Moreover, the possibility of reducing the project cost is getting less as the project is progressed. Case-based reasoning (CBR), which can be viewed as an effective method for early cost estimating, is widely utilized recently. Early cost estimates using CBR have advantages over the traditional ones as they produce reasonable outputs and self-studying is possible by simply adding new cases. Case-based reasoning is composed of a cycle of retrieve, reuse, revise, and retain process. However, in the majority of research cases, they are focused on how to retrieve the similar cases, instead of revising the cases which is expected to increase accuracy results of cost estimation. This research suggests a method of revising retrieved similar cases in a GA-CBR cost model which is widely studied and utilized for early cost estimating recently. To validate the proposed method, case study is conducted based on Korean public apartment projects.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.323-327
• /
• 2008

본 연구는 판형 핀-관 열교환기의 열전달 특성을 상용 CFD 코드인 SC/Tetra를 사용하여 해석한 내용에 관한 것이다. 해석조건은 입구속도 0.63 m/s, 튜브온도 $44.5^{\circ}C$이다. 해석 열교환기는 총6가지로 검토하였으며 각각의 온도분포와 유동패턴을 해석하고 판형 핀-관 열교환기의 열전달 특성을 비교 검토하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.242-245
• /
• 2008

Exchange System for mobile communication operator is very important for providing continuous services to customers. However traditional solution is too expensive for choosing in the real environment. In this paper, we suggest cost-effective auto backup monitoring solution, which is robust for system failure. And this suggested solution will also can be adopted to the $4^{th}$ generation of IP core network.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3208-3213
• /
• 2011

It has regarded an attempt to design and construct more safe structures as challenges such as fate. In order to operate public facilities safely, It can be taken how to improve the resistance to applied load by increasing the cross-section of structural members or by installing reinforcement. But inevitably such a way is accompanied by an increase of construction cost or maintenance cost. To make a cost-effective construction, Reliability-based decision analysis which can judge the adequacy of investment is suggested using statistical data of the load, resistance and the maintenance cost.