• 한국학교보건학회지
• /
• 제12권2호
• /
• pp.207-215
• /
• 1999

The objectives of this study are to explain the use of media materials in school health education with other related factors in elementary, middle, and high schools in Korea. The data were collected by questionnaires from June to September in 1998. The number of subjects were 294 school nurses. The PC-SAS program was used for statistical analysis such as percent distribution, chi-squared test, spearman correlation test, and logistic regression. The use of media materials in health education has become extremely common. Unfortunately, much of the early materials were of poor production quality, reflected low levels of interest, and generally did little to enhance health education programming. A recent trend in media materials is a move away from the fact filled production to a more affective, process-oriented approach. There is an obvious need for health educators to use high-quality, polished productions in order to counteract the same levels of quality used by commercial agencies that often promote "unhealthy" lifestyles. Health educators need to be aware of the advantages and disadvantages of the various forms of media. Selecting media materials should be based on more than cost, availability, and personal preference. Selection should be based on the goal of achieving behavioral objectives formulated before the review process begins. The decision to use no media materials rather than something of dubious quality usually be the right decision. Poor-quality, outdated, or boring materials will usually have a detrimental effect on the presentation. Media materials should be viewed as vehicles to enhance learning, not products that will stand in isolation. Process of materials is an essential part of the educational process. The major results were as follows : 1. The elementary schools used the materials more frequently. But the production rate of media materials was not enough. The budget was too small for a wide use of media materials in school health education. These findings suggest that all schools have to increase the budget of health education programs. 2. Computers offer an incredibly diverse set of possibilities for use in health education, ranging from complicated statistical analysis to elementary-school-level health education games. But the use rate of this material was not high. The development of related software is essential. Health educators would be well advised to develop a basic operating knowledge of media equipment. 3. In this study, the most effective materials were films in elementary school and videotapes in middle and high school. Film tends to be a more emotive medium than videotape. The difficulties of media selection involved the small amount of extant educational materials. Media selection is a multifaceted process and should be based on a combination of sound principles. 4. The review of material use following student levels showed that the more the contents were various, the more the use rate was high. 5. Health education videotapes and overhead projectors proved the most plentiful and widest media tools. The information depicted was more likely to be current. As a means to display both text and graphic information, this instructional medium has proven to be both effective and enduring. 6. An analysis of how effective the quality of school nurse and school use of media materials shows a result that is not complete (p=0.1113). But, the budget of health education is a significant variable. The increase of the budget therefore is essential to effective use of media materials. From these results it is recommended that various media materials be developed and be wide used.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.230-236
• /
• 2019

최근 콘크리트 품질과 관련된 이슈로 시멘트의 원가절감 및 잔골재의 품질저하로 인해 콘크리트 표면의 들뜸, 레이턴스의 과다로 인한 표면 스케일링 및 소성수축의 증가로 인한 균열발생 등의 표면품질 하자 발생사례가 지속적으로 증가되고 있으며, 사회적인 이슈로 인해 미세먼지 및 배기가스로 인한 환경문제를 해결하고자 도로구조물의 광촉매 적용이 시도되고 있다. 이에 본 연구에서는 현장에서 편리하게 적용될 수 있는 양생 방법 중 작업 속도 및 효율성에서 우수한 양생제를 개발하고자 하였으며, 이와 더불어 표면층의 광촉매 코팅을 위한 나노사이즈의 이산화티탄(TiO2)의 혼입 및 분산방안을 평가하여 광촉매 작용이 가능한 다기능성 피막양생제를 개발가능성을 검토하고자 하였다. 실험결과 실리콘계 및 실란계는 굳지않은 콘크리트 표면에서 신속하게 피막을 형성하는 성능을 보이기 때문으로 양생제로서의 원료로 검토를 진행하여 기존의 양생제보다 피막성능이 우수한 고성능 피막 양생제를 개발하였다. 나노물질의 적용을 위한 분산방안을 검토하기 위해 분산된 시료를 4주간 옥외폭로하여 분리유무를 통한 안정성을 평가한 결과 초음파 분산기의 성능이 가장 우수한 것으로 확인되었다.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.52-60
• /
• 2018

최근 자동차 산업에서는 연비향상 및 안전규제 강화에 따라 차량 경량화가 필수적으로 요구됨에 따라 DP강(Dual Phase steel), CP강(Complex Phase steel), MS강(Martensitic Steel), TRIP강(Transformation Induced Plasticity steel), TWIP강(Twinning Induced Plasticity steel) 등과 같은 인장강도 700MPa 이상인 초고장력강(Ultra High Strength Steel)의 적용이 증가하고 있다. 초고장력강을 차체에 적용하기 위해서는 용접공정이 필수적이며, 원가 측면에서 유리한 전기저항점용접(Resistance Spot Welding, RSW)이 차체 용접에서 80%이상으로 가장 많이 적용되고 있다. 초고장력강은 강도향상을 위해 합금원소 함량을 늘이기 때문에 일반적으로 용접성이 열악한 것으로 알려져 있다. 이러한 초고장력강의 저항점용접의 경우 적정 용접조건 영역이 축소되고 용접부에서 계면파단 및 부분계면파단이 발생하는 것으로 보고되어 있어 결함 및 품질을 실시간으로 예측할 수 있는 용접품질 판정 연구가 활발히 진행되고 있다. 이에 따라 본 연구에서는 저항 점 용접을 수행할 때 검출되는 2차 회로 공정 변수를 이용하여 용접부의 동저항을 모니터링하고, 이 동저항 패턴에서 용접 품질 판단에 필요한 인자들을 추출하였다. 추출한 인자들을 상관분석하여 용접 품질과의 상관성을 파악하였으며, 상관성이 높은 인자들을 이용하여 회귀분석을 실시하였다. 이를 근거로 현장 적용이 가능한 회귀 모델을 제시하였다.

• 농업과학연구
• /
• 제42권4호
• /
• pp.389-396
• /
• 2015

This study was performed to investigate the opinions of various related-industries on ban of antibiotics growth promoters (AGPs) in commercial mixed feed. The answers on a total of 21 questions were summarized by response number and percentage. 93% of those surveyed were in agreement of a ban of dietary AGPs. The agreement reasons were the livestock safety (61.5%), the reduction of antibiotic use (23.1%), and decrease of antibiotic-resistant bacteria (11.5%). The negative effects expected by the ban of AGPs were poor growth performance (44.2%), elevated disease emergence (31.4%), increasing the feed cost (18.6%), and quality degradation of livestock (5.8%). As the efficient plans for decline of AGPs use, the feeding environment improvement was the highest with 43%, and farmer training and the consolidation inspection of residual substance on antibiotics in livestock product was 27.9% and 22.1%, respectively. 46.5% of respondent are considering the modification of feed spec and 39.5% of those surveyed have staged a modified feed spec. In conclusion, livestock related-industries approve a ban of AGPs, and they assert that the policy support, improvement of management and environment in the farm, providing technology from related-industries are multiply essential for a stable settlement of a ban policy of AGPs.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.331-341
• /
• 2014

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

• 한국병원경영학회지
• /
• 제4권1호
• /
• pp.1-20
• /
• 1999

Since the late 1980s, there have been radical changes in the managerial environment of Y University Medical Center(YUMC). Externally, the competition among hospitals has intensified due to the establishment of universal health insurance in 1939 and the entrance of large enterprises into the health care industry in the early 1990s. In addition, government regulation of medical institution is becoming stricter. Also, consumer groups have continued to demand the respect for patient rights and improvement of the quality of medical services. Internally, the financial condition of YUMC has worsened, not only because weak control and poor mediation in its large-scale structure have made its operation inefficient, but also because the rates of increase in the prices of goods and labor have grown faster than any increases in revenues. This study on materials management at YUMC presents a way for YUMC to reduce costs and increase its productivity, thereby overcoming its financial difficulties and dealing with external pressures. This study utilized the case studies of the materials purchasing and medical supply management in the United States and the comparative analysis of management to suggest short-term and long-term alternatives for innovation in YUMC. The goals of the short-term alternatives for innovation are to centralize the purchasing and supply departments and to simplify the decision-making processes. Through these attempts, it is estimated that YUMC's costs could be reduced by $600,000 per year. In the long-term, it is necessary to consider introducing a Supply Processing Distribution(SPD) system and setting up a centralized electronic system for supply and inventory management, although it is difficult to estimate the effect of cost-cutting because of the lack of analysis data. Thus, YUMC should thoroughly analyze initial investment costs and economical efficiency generated from long-term alternatives.

• 신재생에너지
• /
• 제8권4호
• /
• pp.21-29
• /
• 2012

The extensible supply of New & Renewable energy resources desperately needs to counter the high dependence on imported energy, recent high oil prices and the Climate Change Conference, and the government has operated the 'Renewable Portfolio Standard' (RPS) as one of the renewable energy policy from 2012. By analyzing the operation case of combined heat and power plant using the woodchip biomass, we drew the price of wood chip fuel, plant capacity factor, electricity selling price, heat selling price and LCOE value. After analyzing the economic feasibility of 3MWe combined heat and power plant based on the operating performance, the minimum of economic feasibility has appeared to be secured according to the internal rate of return (IRR) is 6.34% and the net present value (NPV) is 3.6 billion won as of 20 years life time after installation, and after analyzing the cases of the economic feasibility of the price of wood chip, plant capacity factor, electricity and heat selling price are changed, the economic feasibility is valuable when the price of wood chip is over 64,000 won/ton, NPV is minus, and the capacity factor is above 46.9%, the electricity selling price is 116 won/kWh and the heat selling price is above 75,600 won/Gcal. When going over the new installation hereafter, we need the detailed review of the woodchip storage and woodchip feeding system rather than the steam-turbine and boiler which have been inspected many times, the reason why is it's hard to secure the suitable quality (constant size) of woodchip by the lack of understanding about it as a fuel because of the domestic poor condition and the calorific value of woodchip is seriously volatile compared with other fuels.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.295-302
• /
• 2008

Purpose: The lower leg often has poor vascularity, proximity to bone, and insufficient soft tissue. The island flaps offer a feasible one stage reconstruction and has a remarkable vascularization and high quality results for soft tissue defect with or without bony problems to occur on regions below the knee. So we reported our experience of island flaps with review of the literatures. Methods: We reconstructed 29 cases of soft tissue and 2 cases of bony defect on regions below the knee by using various island flaps at our hospital from December, 1991 to January, 2006. We used 2 fibular osteocutaneous island flaps, 15 reverse sural island flaps, 6 extensor digitorum brevis muscular island flaps, 2 medial plantar island flaps, 5 saphenous island flaps, and a dorsalis pedis island flap. Results: Partial necrosis was developed in 4 out of 15 reverse sural island flaps and 1 out of 5 saphenous island flaps, but they were healed with secondary skin graft. There was partial loss of skin graft on the donor sites in 2 cases. Conclusion: Island flaps are very useful for reconstruction of regions below the knee because island flaps have good vascularity and less risk of infection. Generous flap size, easy operative technique, lower cost, shorter operative time, and minimal morbidity at the donor site are other advantages. We attained satisfactory results.

• 문화기술의 융합
• /
• 제6권2호
• /
• pp.529-534
• /
• 2020

인류 문명의 발전은 산업화에 따른 도시의 발전과 운송 기술의 진화와 맥을 같이한다. 지금까지의 도시 발전은 수송비 절감과 한정된 중심업무 지구로서의 토지 이용 요구에 따라 진행되어왔다. 도시 인구 밀집도의 지속적인 증가는 지가상승, 교통 혼잡, 빈부격차, 공해발생 등과 같이 사회·경제적으로 많은 문제를 일으켜 왔고 현재의 도시 생태 시스템으로는 전반적인 해결에 어려움이 있다. 그러나 문제의 해결을 위한 실마리는 바로 도시생태계 내에서 찾을 수 있다. 서울 심야버스 운행 노선의 설계는 바로 심야의 도시 내 이동 인구의 흐름을 정보통신 기술을 이용해 분석하여 얻은 결과이다. 이렇듯 도시 문제의 해결은 도시 생태계의 분석에서 출발하는 것이 타당하다. 문제의 원인을 알았다면 시민의 삶의 질을 높이기 위해 빅데이터 플랫폼 구축이 필요하고 이를 통한 해결이 가능하다. 이 플랫폼의 중심에는 정보통신 기술의 기반 하에 도시의 구성 요소와 연결되어 실시간 수집, 분석 및 적용되는 빅데이터가 자리 잡고 있어야한다. 본 연구를 통해 지속 가능한 스마트 시티를 위한 빅데이터 플랫폼 구축과 적용 방안에 대하여 고찰한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.285-289
• /
• 2006

Recently the target area for the installation of structures have been changed from shallow water into deep one by reservation and use of the wider coastal region, and development of deep water. Additionally, great emphasis in the improved human life quality has been placed on the necessities for the preservation of the agreeable natural and coastal environments and development waterfront, recreation, and resort in the sea. However, the existing gravity-type breakwater did not appropriately cope with the recent changes of circumstances, but required the enormous construction coat for coping with them. Until now, floating breakwuater, which was adequate for the environment and construction cost, has been actively studied in the other countries including Japan. This floating breakwater has been already constructed in many places and satisfactory in poor subsoil and deep water in Japan. Also it showed the same function as a gravity-type breakwater. But floating breakwater was not control long period waves by reason of constructive characteristic. The aim of this study is to discuss field application of Floating Breakwater with Compound Plate Type(FBCPT) in coastal region by using numerical analyses and hydraulic model test.