• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.153-156
• /
• 2009

Sagnac 효과를 사용한 회전센서로 알려진 광자이로스코프(이하 FOG)는 넓은 범위의 회전율을 측정하기 위해 개발 중에 있다. 본 논문은 개루프 FOG의 개발과 FPGA를 이용한 디지털 신호처리 기술을 다루고 있다. 첫째로 Good bias stability($0.22^{\circ}/hr$), Scale factor stability, 단일모드 광섬유를 이용한 최대한 낮은 angle random walk ($0.07^{\circ}/\sqrt{hr}$) 와 저가의 중급 자이로 (pointing grade)의 설계를 목표로 하고 있다. 둘째 Processing 이득에 의해 실질적으로 디지털 Demodulator 출력이 개선된 SNR을 갖는 디지털 FOG 신호처리 알고리즘을 디자인 했다. 적은 계산량을 가진 저가의 프로세서와 Adder, 그리고 Shift register만으로 필요로 하는 CIC타입의 Decimation 블록은 이러한 모든 디지털 FOG 프로세서에 사용 가능하다.

• 벤처창업연구
• /
• 제10권2호
• /
• pp.11-16
• /
• 2015

본 연구에서는 조직 내 생산부문에서 전개되는 혁신활동에 대한 최고경영자 및 구성원의 관심과 참여가 궁극적으로 기업경영성과에 어떤 영향을 미치는지를 구조방정식을 적용하여 살펴보고자 한다. 이를 바탕으로 기업 내 혁신활동의 성공을 위한 실천적인 방안을 찾고, 많은 기업에서 공유함으로써 보다 효율적인 혁신활동을 전개할 수 있도록 지원하기 위함이다. 본 연구는 중소기업 277개사를 대상으로 한 설문조사를 바탕으로 이루어졌으며, 수집된 설문자료는 데이터의 신뢰성과 타당성을 검토한 후 구조방정식을 이용한 모형의 설계 및 검증 과정을 통해 진행하였다. 그 결과 경영자에 의한 비전제시와 혁신활동지원 등에 대한 확고한 의지표명이 조직구성원 입장에서 혁신활동의 토대가 되는 교육 및 소집단활동, 제안활동 참여에 적극 가담하도록 영향을 미치고 있을 뿐만 아니라, 혁신활동의 성과 제고에도 유의한 영향을 미치는 것을 확인하였다. 또한 작업자의 교육 및 활동 참여의지가 혁신활동성과에 직접적인 영향을 끼치는 것도 확인할 수 있었으며, 결과적으로 매출액 증대, 영업이익률 증대, 원가절감 등과 같은 기업의 경영성과에도 긍정적인 작용을 하고 있음을 알 수 있다.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.61-81
• /
• 1998

This research studies the role of IT (Information Technology) in improving productivity of a company through samll group activities. For this purpose, this research analyzed the samll group activities of the company as to how IT was employed bo improve business processes. Cases of small group activities that were conducted from January, 1996 to December, 1996 in a Korean company (name withdrawn) were analyzed. Eight out of eleven small group activities have been studied. They were examined as to the effect of IT in time and cost savings, reduction in manpower and so on. TQM is the activity of process improvement based on the existing processes in pursuit of satisfaction of customers' needs. This study analyzed how IT was used to solve the current problem in business processes. As a result of the case study, it is found that TQM activities with IT could reduce expenses significantly. More specifically, expenses have been cut down by 56% a year on average. By improving the business processes through the activities of TQM which used IT, companies could remove the unnecessary business processes and the duplicated business processes. In other words, with the use of IT in TQM activities, they could move closer to goals of the satisfaction of the customers' needs by reducing expenses and time. This study examined the role of IT from the point of view of business process improvement. Internally, IT has a positive impact on reducing expenses, processing time, manpower and so forth. Externally, it plays an important role of company's gaining competitive advantage through the satisfaction of customers and stakeholders. In conclusion, the proper use of IT will significantly increase the performance of a company.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.74-81
• /
• 2013

The high-speed machining in the manufacturing industry field has been widely applied for parts of vehicles, aircraft, ships, electronics, etc., recently, because the effect of cost savings for shortening processing time and improving productivity is great. The purpose in this study is to investigate the effect of cutting depth on the surface roughness of workpiece with the spindle rotational speed and feed rate of high-speed machines as a parameter to find the optimal depth in the finishing for ball end mill of the aluminum alloy 7075 which is used much in aircraft parts. When the cutting depth for the respective feed rate and spindle rotational speed is varied from 0.1 mm to 0.7 mm at intervals of 0.2 mm in the wet finishing of the aluminum alloy 7075 by the insoluble cutting oils and high-speed machining used in the rough machining of previous study, the surface roughness values and the cutting temperature are measured. In addition, the cutting surface shapes of test specimens are observed by optical microscope and compared with respectively. It is found that the surface roughness values and the temperature generated during machining are increased as the feed rate and cutting depth are raised, but those are decreased as the spindle rotational speed is increased.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.349-354
• /
• 2008

2008년 8월 우리나라는 온실효과로 인한 기후변화 대응 역량을 강화하고, 에너지의 안정적 공급과 효율화 체계를 구축하기 위한 방안으로 '제1차 국가에너지기본계획'을 발표하였다. 이에 따르면 우리나라는 세계 10위의 에너지다소비 국가이자, 그 중 97% 이상을 해외 수입에 의존하는 나라로서 신재생에너지설비의 중요성이 크게 부각되고 있다. 본 논문은 일반적인 건물의 난방설비로 이용되고 있는 가스와 유류설비를 지열히트펌프로 대체함으로서, 전력계통의 부하율을 향상시키는 방안을 제시하였으며, 이에 따른 에너지비용 절감과 온실가스의 감축방안을 정량적으로 제시하였다.

• 산경연구논집
• /
• 제10권9호
• /
• pp.37-43
• /
• 2019

이 논문은 즉석섭취식품으로 분류되는 김밥용 김에 관한 자가품질검사의 개선안을 제시하였다. 김밥용 김에 적용하는 검사항목 중 장염비브리오균은 3가지 측면에서 적합하지 않다. 첫째, 선행연구 가운데 김밥용 김에서 장염비브리오균을 발견한 사례가 전무하다. 둘째, 전수조사 성격의 자가품질검사 부정합 내역(2015~16년)에 김밥용 김이 적시된 적이 없다. 셋째, 국제기준인 CODEX 규정은 해조류에 장염비브리오균 검사 의무를 부여하지 않는다. 끝으로, 수출용 김과 조미김 및 기타 수산물가공품 유형에 해당 검사가 면제된다. 이에 따라 김밥용 김에 대한 장염비브리오균 검사의무의 면제는 타당하며 그에 따른 경제적 이득은, 특히 영세업체에 클 것으로 추정된다. 2018년 3월 중 총 75곳의 자가품질 검사기관에 대한 전화 및 서류조사 결과 업체당 수수료 절약 규모는 업체당 연평균 13만 원에 이를 것으로 산출하였다. 또한, 검사의 투명성과 효율을 제고하기 위해서는 검사기관 간 수수료의 조화가 필요할 것으로 판명되었다.

• 한국환경과학회지
• /
• 제29권11호
• /
• pp.1015-1024
• /
• 2020

Using the waste(sand wastr and boiler ash) in fluidized bed inciverator, lightweight aggregate concrete was produced and a recycling plan was prepated. The first, the result of the leaching test shows that the waste fluid sand and boiler ash did not exceed the effluent standard. This indicates that there is no harmful effect for recycling. The second, in the lightweight aggregate test using waste fluid sand and boiler ash, the sample that combined cement, waste fluid sand, and sand showed the highest compressive strength, and the mix proportion was 10: 7: 3. Lightweight aggregate concrete that combined cement, waste fluid sand, boiler ash, and sand had a low compressive strength by and large. The third, the same results were identified in the relation between the content of SiO₂ and that of Na₂O. As the SiO₂ content is lowered, the overall viscosity and plasticity of the concrete also decrease, which is not a good condition to form concrete. As for Na₂O, as the content increases, the viscosity of the sample and the viscosity of the cement are remarkably lowered, and the strength of the finished concrete is lowered. Therefore, it was concluded that the higher the content of SiO₂ and the lower the content of Na₂O, the more suitable it is to mix with cement to produce concrete. Fourth, from the fluidized bed incinerator currently operated by company A in city B, a total of 14,188 tons/year were discharged as of 2016, including 8,355 tons/year of bottom ash (including waste fluid sand) and 5,853 tons/year of boiler ash. The cost for landfill bottom ash and boiler ash discharged is 51,000 won/ton, and the total annual landfill cost is 723,588,000 won/ year. Assuming that the landfill tax to be applied from the year 2018 is about 10,000 won/ton, and if there is no reduction in waste disposal charge, an additional landfill tax of 141,880,000 won/year will be imposed. Consequently, the sum total of the annual landfill cost will be 865,468,000 won/year. Therefore, if the entire amount is used for recycling, the annual savings of about 8.7 billion won can be expected.

• 복식문화연구
• /
• 제28권4호
• /
• pp.446-462
• /
• 2020

The objectives of this study are to explore the information source, assessment, and preferred styles of 3D virtual influencers(VI), to investigate the expected impact of advertisements with 3D VIs on brands, and to explore ways of expanding the use of 3D VIs. In-depth interviews with 40 males and females in their 20s and 30s were conducted and qualitative data were analyzed. The study results are summarized as follows. First, the information source of the 3D VI was SNS, acquaintances, and broadcasting. Second, 3D VIs were considered positively due to their attractive appearance, wide utilization, innovative use, freshness, separation from private identity, and time and cost savings, while considered negatively due to their unrealistic appearance and antipathy against replacing a person's role. Third, the preferred appearance styles of the 3D VI differed according to the level of virtuality although the majority of interviewees preferred similar looks to real people with low virtuality. Fourth, diverse image qualities such as innovative, differentiated, trendy, high-value, professional, and future-oriented were considered as transferred to the brand advertised by 3D VIs. Fifth, advertisements with 3D VIs may help build positive perceptions of advertised brands that may lead to purchase behaviors for some consumers. Lastly, to expand the use of 3D VIs, the specific advantages of virtual models should be maximized with consideration of how to implement a variety of body types and images of models. Findings present an important foundation to generate strategies to better apply 3D VIs to the fashion market.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.653-661
• /
• 2017

본 논문은 탄소배출 규제와 같이 새롭게 변화하는 물류 환경에서 유통업체들이 올바른 물류전략을 선정하기 위하여 탄소배출을 고려한 두 물류전략의 총 운영비용의 비교 분석 연구를 수행하였다. 본 연구에서는 물류전략간 운영비용 비교를 위하여 기존 EOQ(Economic Order Quantity) 모형을 활용하여 국내의 물류환경 및 탄소배출을 고려한 모형으로 확장하였고, 이 모형을 바탕으로 실증연구 분석을 수행하였다. 실증 연구로는 대형 유통업체의 농산물 유통을 대상으로 하여 기존의 물류 전략과 직배송 물류 전략의 운영비용 및 경제적 주문량을 산정하고 분석하였다. 실증연구 결과 농산물을 운송함에 있어 직배송 물류전략이 기존 물류전략 대비 50% 이상의 운영비용 절감효과가 있는 것으로 분석되었고, 이는 직배송 물류전략이 기업의 운영비용 절감에 더 효과적인 것으로 판단할 수 있다. 결론적으로, 탄소배출을 고려하였을 때 직배송 물류전략이 기존 물류전략보다 경제적 환경적인 효과가 있다고 분석될 수 있으며, 농산물의 신선도도 함께 높이는 전략이라고 판단된다.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.31-38
• /
• 2019

The purpose of this study is to provide the priority of the front-loading factors in the design stage of the automotive parts development process in order to efficiently and effectively respond to the demands of the car maker (customer). Front-loading is defined as a strategy in order to improve development performance by shifting the identification and solving of design problems to earlier phases of a product development process. Two approaches of the front-loading are project-to-project knowledge transfer and rapid problem solving. For the study, a survey was conducted on the R&D department in the automobile parts company and analyzed by AHP (Analytic Hierarchy Process) method. The result of the survey shows the cost savings is the highest weight in terms of front-loading effect and in terms of front-loading factors, it gives priorities as "the problems of past project" first, "Design Review" second, "CAE (Computer Aided Engineering)" third, "FMEA (Failure Mode and Effects Analysis)" fourth, "benchmarking" and SR (Sourcing of Requirements). The results of the study will be helpful to provide practical value for improving product design of component development.