• Computers and Concrete
• /
• v.19 no.6
• /
• pp.737-744
• /
• 2017

Geopolymer Concrete is typically proportioned with activator solution leading to moderately high material cost. Such cost can be enduring in high value added applications especially when cost savings can be recognized in terms of reduction in size of the members. Proper material selection and mix proportioning can diminish the material cost. In the present investigation, a total of 27 mixes were arrived considering the mix parameters as liquid-binder ratio, slag content and sodium hydroxide concentration to study the mechanical properties of geopolymer concrete (GPC) mixes such as compressive strength, split tensile strength and flexural strength. The derived statistical Response Surface Methodology is beleaguered to develop cost effective GPC mixes. The estimated responses are not likely to contrast in linear mode with selected variables; a plan was selected to enable the model of any response in a quadratic manner. The results reveals that a fair correlation between the experimental and the predicted strengths.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.155-162
• /
• 1999

reliability from components reliability. In this case, it assumes that components failure is mutually independent, but it may not true in real systems. In this study, the mean cost per unit time is computed as the ratio of mean life to the mean cost. The mean life is obtained by the reliability function under power rule model. The mean cost is obtained by the mathematical model based on the inspection interval. A heuristic method is proposed to determine the optimal number of redundant units and the optimal inspection interval to minimize the mean cost per unit time. The assumptions of this study are as following : First, in the load-sharing k-out-of-n:G system, total loads are applied to the system and shared by the operating components. Secondly, the number of failed components affects the failure rate of surviving components as a function of the total load applied. Finally, the relation between the load and the failure rate of surviving components is set by the power rule model. For the practical application of the above methods, numerical examples are presented.

• The Journal of the Korea Contents Association
• /
• v.2 no.1
• /
• pp.52-58
• /
• 2002

The purpose of this study is to investigate validity of integrated information system for materials & parts industry. This purpose is carried out using cost-benefit analysis. In cost analysis, we use a present value of budget of KISTI. In Benefit analysis, we use a present value of investment on information of materials & parts industry. In the result of cost-benefit analysis, us can find that cost-benefit ratio is 4.67.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.435-446
• /
• 2002

Purpose : The purpose of the study were to describe outcomes of CHP activities, and to evaluate the economic validity of CHP through a cost-benefit analysis. Method : The sample size was 272. Data were collected using a researcher developed questionnaire from November 1999 to March, 2000. Result : The mean age of CHPs was 39.6 (SD-36). In regard to marital status, 90.8% of the respondents were married. 72% of the CHPs had associate degree. Among CHP activities, providing medical services was 50%, followed by home care visits 20% and health promotion services 20%, preventive services 10%. Total costs per month incurred to CHP activities was \3,053,437($2,442.7). Total benefits per month was \6,711,525($5,369.2). Hence, net benefit was calculated as \3,658,089($2,926). Conclusion : Cost-benefit ratio was 2.20, which provides the evidence of the economic viability of CHP program. The result of cost-benefit analysis, however, would more strongly support the economic value of CHP if intangible benefits of CHP activities such as decreases in pain and suffering and increased quality of life, could be counted.

• Journal of the military operations research society of Korea
• /
• v.25 no.1
• /
• pp.1-12
• /
• 1999

The ratio of the nonscheduled air flight transportation is about 49% among the personnel transportation at the Korean Air Force from 1993 to 1997. If an appropriate nonscheduled air flight method is developed, it may considerably achieve a reduction of the transportation cost. The purpose of this paper is to propose the least cost transportation method using the optimization technique. The nonscheduled air flight for the personnel can be classified into three types. The proposed least cost transportation method is tested with a current air flight method for each of three types. It is shown that a proposed method can considerably reduce the transportation cost.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.1
• /
• pp.49-55
• /
• 1994

This study was conducted to compare the of rearing native and cross-bred dairy cows and returns received from them. For this purpose, 144 cows of 132 household from 24 villages were randomly selected. of them, 96 were native cows and 48 were cross-bred cows. The study revealed that among the structure of cost components, labour charge occupied the major share in the total cost of milk production per litre. The total cost of rearing native and cross-bred cows was Tk. 14,155 and Tk. 19,854 per annum, respectively. The average net cost of milk production per litre was Tk. 14.12 for native cows and Tk. 0.52 and for cross-bred cows were Taka 3.40. The benefit-cost ratio of milk per litre was higher (1:1.33) in cross-bred cows than native ones (1:1.04). The study further showed that in comparing with bulk line cost, the price of milk per litre received by the farmers was higher in cross-bred cows than native cows. Therefore, the study recommends dairying with cross-bred cows as encouraging and viable commercial enterprise in Banfladesh.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.3
• /
• pp.45-52
• /
• 1991

To investigate opportunities for wood frame housing and to activate wood frame house construction, trends of construction activities. preference about housing, and building codes related to wood frame housing were discussed. And two models of wood frame house were developed and construction cost was analyzed to compare with comparative masonry houses. The results obtained were as follows: 1. While 77.8% of people prefer single-family houses, majority of people(74.9%), ironically, possess multi-family houses such as apartments Wood work cost was ratio of 4% of total building cost. while wood material cost accounted merely for 11 % out of total building material cost. 2. Building code was not major barrier to residential house at height under 13m. The building code regulated major structural member and family boder wall of multi-family house to be built with fire retardant material. 3. The proper wood frame house was analyzed of town house or villa type locating in suburban of big city with hot ondol system for the upper middle class. 4 There was no difference in construction cost between western style wood frame house and comparable masonry house, but construction cost for Korean style wood frame house is 27% higher than that of comparable masonry house. It was necessary to reduce materials and cost down by prefabrication technique for both style of wood frame house.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.209-230
• /
• 2007

This paper analyzed the social cost function of a congestion-prone service system, which is developed from the social cost minimization problem. The analysis focused on the following two issues that have not been explicitly explored in the previous studies: the effect of the heterogeneity of value-of-travel-times among customers on the structure of cost functions; and the structure of the supplier cost function constituting the social cost function. The analysis gave a number of findings that could be summarized as follows. First, the social marginal cost for one unit increase in system output having a certain value-of-travel-time is the sum of the service time cost for that value-of-travel-time and the marginal congestion cost for the average value-of-service-time of all the system outputs. Second, the marginal congestion cost equals the marginal supplier cost of system output under the condition that supplier compensates the customers for the changed service time costs which is incurred by the marginal capacity increase necessary for economically facilitating an additional system output. Third, the compensated marginal cost is the multiple of the marginal capacity cost and the inverse of system utilization ratio, if the service time function is homogeneous of degree zero in its inputs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.6857-6862
• /
• 2015

Background: To identify the optimal cost effective strategy for the management of women having ASC-US who attended at King Chulalongkorn Memorial Hospital (KMCH). Design: An Economical Analysis based on a retrospective study. Subject: The women who were referred to the gynecological department due to screening result of ASC-US at King Chulalongkorn Memorial Hospital, a general and tertiary referral center in Bangkok Thailand, from Jan 2008 - Dec 2012. Materials and Methods: A decision tree-based was constructed to evaluate the cost effectiveness of three follow up strategies in the management of ASC-US results: repeat cytology, triage with HPV testing and immediate colposcopy. Each ASC-US woman made the decision of each strategy after receiving all details about this algorithm, advantages and disadvantages of each strategy from a doctor. The model compared the incremental costs per case of high-grade cervical intraepithelial neoplasia (CIN2+) detected as measured by incremental cost-effectiveness ratio (ICER). Results: From the provider's perspective, immediate colposcopy is the least costly strategy and also the most effective option among the three follow up strategies. Compared with HPV triage, repeat cytology triage is less costly than HPV triage, whereas the latter provides a more effective option at an incremental cost-effectiveness ratio (ICER) of 56,048 Baht per additional case of CIN 2+ detected. From the patient's perspective, the least costly and least effective is repeat cytology triage. Repeat colposcopy has an incremental cost-effectiveness (ICER) of 2,500 Baht per additional case of CIN2+ detected when compared to colposcopy. From the sensitivity analysis, immediate colposcopy triage is no longer cost effective when the cost exceeds 2,250 Baht or the cost of cytology is less than 50 Baht (1USD = 31.58 THB). Conclusions: In women with ASC-US cytology, colposcopy is more cost-effective than repeat cytology or triage with HPV testing for both provider and patient perspectives.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.6
• /
• pp.519-524
• /
• 2009

This work presents a simple technique to determine the Poisson's ratio of homogeneous solid material using a pair of low cost PVDF ultrasonic transducers. It is based on transducer's property of generating longitudinal and transversal waves depending on the excitation frequency. Mechanical tests were conducted to validate the proposed method, resulting in a good agreement between ultrasonic and mechanical techniques.