• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.86-100
• /
• 2008

It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.271-272
• /
• 2021

The maintenance and repair work of sidewalk block pavement is a construction that requires a large amount of budget to be invested every year. It is important to establish an appropriate standards for estimating construction cost to ensure proper budgeting and quality. In this study, the standards for estimating the cost of maintenance and construction work for sidewalk blocks that can be applied to the construction volume classified according to the site conditions, construction type, and equipment use differentiated from new construction was established. As a result, the daily construction volume was presented by reflecting excavator and truck as equipment in the combination of paver and common worker. The re-installation was applied by separating the construction volume of sections with general blocks and induction/raised blocks based on the installation of sidewalk blocks after demolition. Generally if block cutting is necessary, the precision construction conditions using a cutting machine were taken into consideration to secure the construction quality. In addition, it has been revised to apply classified construction volume into A and B-Type depending on the park and site conditions.

• 정보처리학회논문지D
• /
• 제12D권1호
• /
• pp.103-110
• /
• 2005

소프트웨어 개발은 구조적기법에서 객체지향기법으로 전환되고 있다. 객체지향 소프트웨어 개발은 폭포수 프로세스가 아닌 반본적 프로세스 적용을 보다 선호하고 있으며, 유스케이스에 기반하여 요구사항을 도출하고, 이에 기반하여 분석, 설계와 코딩이 이루어지고 있다. 따라서, 유스케이스에 기반하여 개발될 소프트웨어의 규모가 추정되고 이에 기반한 개발노력, 비용과 개발기간이 추정되어야만 프로젝트 성공을 위한 관리가 가능해진다. 기존의 유스케이스 점수 관련 개발노력 추정 모델들은 겉형과 비선형 모델들이 제안되었지만 유스케이스 점수의 규모에 따른 개발노력을 적절히 추정할 수 있는 모델이 없는 실정이다. 본 논문은 성장곡선을 적용해 유스케이스 점수에 대한 개발노력을 추정하는 모델을 적용한 결과 기존의 통계적 모델들보다 월등한 성능향상을 보였다. 따라서, 본 모델을 적용하여 개발노력을 추정함으로서 프로젝트 개발관리를 적절히 수행할 수 있을 것이다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.99-107
• /
• 2016

PURPOSES : This study was initiated to estimate expressway traffic congestion costs by using Vehicle Detection System (VDS) data. METHODS : The overall methodology for estimating expressway traffic congestion costs is based on the methodology used in a study conducted by a study team from the Korea Transport Institute (KOTI). However, this study uses VDS data, including conzone speeds and volumes, instead of the volume delay function for estimating travel times. RESULTS : The expressway traffic congestion costs estimated in this study are generally lower than those observed in KOTI's method. The expressway lines that ranked highest for traffic congestion costs are the Seoul Ring Expressway, Gyeongbu Expressway, and the Youngdong Expressway. Those lines account for 64.54% of the entire expressway traffic congestion costs. In addition, this study estimates the daily traffic congestion costs. The traffic congestion cost on Saturdays is the highest. CONCLUSIONS : This study can be thought of as a new trial to estimate expressway traffic congestion costs by using actual traffic data collected from an entire expressway system in order to overcome the limitations of associated studies. In the future, the methodology for estimating traffic congestion cost is expected to be improved by utilizing associated big-data gathered from other ITS facilities and car navigation systems.

• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.243-251
• /
• 2015

국내 원자력발전은 현재 두 번째로 큰 전력 공급 방법이며 원전의 수 역시 증가되는 것으로 계획되어 있다. 그러나, 원자력발전에 의해 발생되는 사용후핵연료에 대해서는 아직 명확한 관리 정책이 확립되어 있지 않다. 원자로 이 후 핵물질 흐름과 관련된 후행 핵연료주기는 사용후핵연료 관리를 위한 기술들의 집합이다. 따라서, 사용후핵연료 관리 정책은 핵연료주기 선택과 함께한다. 핵연료주기 선택의 중요 항목은 경제성으로 이는 사적비용과 함께 외부비용을 더해 결정되어야 한다. 직접비용 인 사적비용과 달리 간접비용인 외부비용에 대한 연구는 원전에 집중되어 있으며 핵연료주기에 대한 연구는 없는 상황이다. 본 연구에서는 핵연료주기에 적용할 수 있는 외부비용 항목들을 도출하고 정량화를 시도하였다. 핵연료주기 외부비용 평가를 위해 고려될 수 있는 핵연료주기로 OT(직접처분), DUPIC(PWR-CANDU 연결), PWR-MOX(PWR 습식재처리), Pyro-SFR (파이로 처리와 고속로 연계)의 네 가지를 선정하였다. 원자력발전의 외부비용 평가에 고려되었던 항목들을 분석하여 핵연료주기에서 에너지 공급 안보비용, 사고위험비용과 수용성 비용을 외부비용 항목으로 도출하고 추산하였다.

• 한국시스템다이내믹스연구
• /
• 제8권2호
• /
• pp.253-273
• /
• 2007

To measure the effect of school zone on housing cost, Linear Regression Model is widely used, and school zone is known as a key determinant of housing cost in Korea. However, when the Hierarchical Linear Model (HLM) is applied with the same data, school effect on housing cost becomes statistically non-significant. It is because HLM effectively separates the effect of individual housing's attributes from the group effect. In sum, the housing cost of Kangnam, where good public schools are located, is apparently is higher than that of Kangbuk. However, the school effect on housing cost (Level 2) becomes non-significant when individual housing's attributes (Level 1) are controlled with HLM.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.113-117
• /
• 2004

We need the contingency cost in order to deal with the uncertainty to be accompanied inevitably at the construction and an every kind risk not to forecast in advance. And also the contingency colt needed for the change order and we need it for reduction of the delay and reduce the trouble between owner and constructor. This study, through checking and analyzing the risk factor, in the step of domestic construction, suggests optimal management reserve to specific business about the contract type and the scale. The main results of this research are summarized as follow. First, I investigated the recognition about the contingency cost, grasped the risk to be happened at the construction step and found out the frequency occurrence, through making up question to engineer are carrying out their job in the domestic construction. Second, I computed optimal contingency cost rate by the statistics investigation, and proposed an improvement plan and problem when compute a contingency cost.

• 자원ㆍ환경경제연구
• /
• 제11권4호
• /
• pp.659-687
• /
• 2002

This study used a discrete choice model to investigate an association between air pollution and hospital visits for acute respiratory symptoms with the national health interview survey conducted in 1998 in South Korea. The results showed that $NO_2$ and TSP were significantly related to hospital visits in a single-pollutant model, but when they were simultaneously considered, only $NO_2$ remained significant. It was estimated as $NO_2$ level increased by 10%(0.0027ppm) from 0.027ppm (the mean $NO_2$ level), hospital visits increase by 0.176%. This study also measured respondent's out-of-pocket expense and the time cost for commuting and waiting for the visit. We found that on the average, out-of-pocket expense is 5,600 won per hospital visit, but the total cost per hospital visit is measured at 33,440 won with time cost of commuting and waiting at 27,840 won. Time cost was over 63.6~83.3% of the total cost per hospital visit.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.121-128
• /
• 1996

Estimating the cost of injuries and "accidents" to an organization is very important to figure out about how much well each organization has run his company and how much efficiently he has got the results using a certain amount of the expense for safety. Despite the potential usefulness to management of information as to the cost of a company's "accidents", it is not customary accounting practice to make these data available. Of the two general kinds of costs forced on a company by its occupational injuries and "accidents", the insurance cost and uninsured cost, -the former is by far the easier to find out. But actually, this uninsured cost should be figured out at each company. Authors have designed the generalized model to figure out the above problem costs to establish its efficient safety control. One construction company has been a pilot for this study. It is found that efficient safety control cost should be 1.2%~l.3% of total selling amount by analyzing actual data for three years.g actual data for three years.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.232-233
• /
• 2021

As construction projects become larger and more complex in the construction environment, and as the Building Information Model(BIM) is technically introduced, the demand for construction costs in units of space is increasing. Cost estimating of spacial element can reduce the error in cost prediction method based on cost of work type and to utilize the construction cost data for each space in the design phase. The purpose of this study is to extract spatial statements by utilizing spacial information of quantitative statements based on items that are common elements of the Quantity Take-Off and Bill of Quantity.