• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.103-108
• /
• 2010

To obtain the best yield of the beneficial ingredients in green tea, such as catechins, green tea powder is most often prepared by ethyl alcohol extraction. However, the taste, cost and composition of ethyl alcohol extract is different from aqueous spray-dried green tea extract (aq-GTE). Specifically, aq-GTE has a better flavor, lower production costs and higher purity when compared to ethyl alcohol extract. In this study, we elucidated the effect of aq-GTE on diet-induced obesity in male C57BL/6J mice following dose-dependent oral administration of aq-GTE. After eight weeks, the body weight was reduced by 13-17% in mice fed 200 mg/kg bw aq-GTE ($12.468{\pm}0.45\;g$; p<0.05) and 20-25% in mice fed 400 mg/kg bw aq-GTE ($11.259{\pm}0.61\;g$; p<0.05) when compared with the high-fat diet (HFD) control group mice ($14.714{\pm}0.95\;g$; p<0.05). The correlation between epididymal fat accumulation and body weight also decreased by approximately 26.6% (p<0.05) in mice fed a HFD with aq-GTE 400 mg/kg bw. Finally, serum parameters such as the triglyceride, glucose and cholesterol levels in the HFD groups were reduced by the aq-GTE 400 mg/kg bw diet. Analysis on glutamic-pyruvic transaminase, blood urea nitrogen and development of hepatic steatosis revealed no histologic evidence of hepatotoxicity in HFD mice fed aq-GTE. Overall, our results imply that aq-GTE is able to regulate body weight and fat accumulation in mice.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.537-544
• /
• 2017

Stable carbon isotope ratio of carbon dioxide (${\delta}^{13}C_{CO2}$) is used as an important indicator in the researches for global climate change and carbon capture and sequestration technology. The ${\delta}^{13}C$ value has been usually analyzed with Isotope Ratio Mass Spectrometer (IRMS). Recently, the use of Laser Absorption Spectrometry (LAS) is increasing because of the cost efficiency and field applicability. The purpose of this study was to suggest practical procedures to prepare laboratory reference gases for ${\delta}^{13}C_{CO2}$ analysis using LAS. $CO_2$ gas was adjusted to have the concentrations within the analytical range. Then, the concentration of $CO_2$ was assessed in a lab approved by the Korea Laboratory Accreditation Scheme and the ${\delta}^{13}C_{CO2}$ value was measured by IRMS. When the instrument ran over 12 hours, the ${\delta}^{13}C$ values were drifted up to ${\pm}10$‰ if the concentration of $CO_2$ was shifted up to 1.0% of relative standard deviation. Therefore, periodical investigation of analytical suitability and correction should be conducted. Because ${\delta}^{13}C_{CO2}$ showed the dependency on $CO_2$ concentration, we suggested the equation for calibrating the concentration effect. After calibration, ${\delta}^{13}C_{CO2}$ was well matched with the result of IRMS within ${\pm}0.52$‰.

• KDI Journal of Economic Policy
• /
• v.31 no.1
• /
• pp.105-138
• /
• 2009

Although the decline in fertility rate is generally observed along the history of economic development throughout the world, the continuing decline hitting below the replacement level in Korea over the recent years gathered serious social concerns on the ground that it accelerates the process of population aging. The total fertility rate in Koreareached 2.08 in 1983, and gradually fell to the levels of 1.08 in 2005 and 1.26 in 2007. The policy debate over the role of the government has been focused mainly on the level of theoretical discussion without substantial basis on firm empirical evidence and the determinants of fertility. The objective of the paper is to empirically investigate the fertility effect of the female wage, which is understood as one of the most important determinants of fertility in Koreasince 1980 focusing on one aspect of fertility, namely birth spacing. Using the Korean National Fertility Survey conducted in 2006, I estimate a duration model of first and second births taking into account individual heterogeneity, which turned out to be an important factor to control for. Compared with previous studies in the literature on the Korean fertility, the study has an advantage of using the complete pregnancy history of women in a more representative sample. Unlike the previous studies, the analysis also deals with the endogeneity of marriage by treating a certain age, rather than age at marriage, as the time in which a woman becomes exposed to the risk of pregnancy. The study shares the common problem in the literature on birth spacing of lacking relevant wage information for respondents in a retrospective survey. I estimate the wage series as a function of the basic characteristics using the annual Wage Structure Survey from 1980 to 2005, which is considered as a nationally representative sample for wage information of employees. The results suggest that the increase in female wage by 10 percent leads to a decrease in second birth hazard by 0.56~0.92 percentage points and that the increase in spouse's wage by the equal amount is accompanied by the increase in second birth hazard by 0.36~1.13 percentage points. These estimates are more precisely estimated and of smaller magnitude than those presented by the previous studies. The results are robust to the different specifications of the wage equation. The simulation analysis based on the predicted values shows that about 17% of the change in the second birth hazard over the period 1980 to 2005 was due to the change in the female wage. Although there is some limitation in data, the results can be viewed as one estimate of the role of female wage on the recent fertility decline in Korea. The question raised by the paper is not a normative one of whether a government should promote childbearing but a positive one thatexplains fertility decline. Therefore, if there is a wide consensus on promoting childbearing, the finding suggests that the policies designed to reduce the opportunity cost of women in the labor market would be effective. The recent movement of implementing a wide range of family-friendly policies including child care support, maternity leave, parental leave and tax benefit in developed countries should be understood in this context.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.285-303
• /
• 2020

A military is not an organization that seeks profits, such as a company, or a research institute whose results and outcomes can produce. Therefore, it can be said that the nature of the bureaucracy is stronger than any other organizations, which perform the task centered based on ranks. In addition, as military missions deal with national and operation security which is closed with each other and more conservative compare to other organization. In this circumstance, the role of military organization and leaders is to carry out their duties with the cost of people's lives, and indeed, leades and leadership in military are more important than those of any organizations. However, many researches are lacking or focused on leadership research in a limited field, especially positive field, developmental, constructive leadership research and researches that are not focused on that area are limited. Already in the United States, research on negative leadership has been actively conducted under the direction of the Secretary of US Army Thomas E. White in 2003, how toxic leadership is serving in military organizations and on the battlefield. Now they realize how toxic leadership had impact on missions in military organizations and on the battlefield. The purpose of this study is to collect and analyze qualitative and quantitative data on the negative leadership of military organizations that have not been studied. The aim of this study was to establish a literature study on the scope and behavior of toxic leadership among negative leadership and to build empirical data on toxic leaders of current military organizations, and to create occupations that occur when subordinates work with toxic leaders. This study analyzes changes in satisfaction and organizational cohesion that mediates results and causes. This study will be more urgent and important for groups that prioritize groups and organizations over individuals, and it may provide new directions for the role and impact of military leaders from attempting these studies.

• Journal of agricultural medicine and community health
• /
• v.29 no.2
• /
• pp.287-301
• /
• 2004

Objectives: The development of internet programs for smoking cessation was motivated to quit smoking in the large group of smokers. This personalized program consisted of tailored message to consider the smokers characteristics, and contain the informations on the outcomes of smoking cessation and the skills to be used in the quit attempts. The purpose of this study was to develop the internet management program and information push-delivery system for smoking cessation to encourage the personal intention to quit smoking. Methods: We conducted in 3 steps as developing push service to encourage intention of smoking cessation, analyzing problems of smoking cessation program through the pilot test and suggesting improvements by implication stages. Results: This program is delivered for 30 days. if the participants do not fail to quit smoking. The contents consisted of 13 stages which were divided on starting period. practical period, maintenance period and success period. And push service afforded the tailored message to participants using their e-mail. According to the evaluation of pilot test, the problems of internet information push-delivery service for smoking cessation were the over-tasks per visiting time, recording style of participants, difficulty of terms and sentences, lack of visual effects, absence of follow-up module and unsuitable link with main homepage. Improvements were divided on 3 stages by implication period. The first stage included the immediate improvements as improving link with homepage, modifying menu of smoking information and upload file of notice part. The second stage included the short term improvements as alleviating condition of withdrawal, coordinating start stage of retrial, modifying errors of information push-delivery service and addition of educational materials. The third stage included the long term improvements as development of follow-up module, cost-effectiveness evaluation, reducing contents quantity, introduction of checking style, compensation of graphics effect and review for SMS utilization. Conclusions: This program contribute to improving smoking cessation rate. Therefore this program should be tested in a community to evaluate the effectiveness. To promote the effectiveness, this program should be developed the contents and the strategies for various targets, and established the follow-up system for ex-smokers.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.280-290
• /
• 2002

Three-dimensional (3-D) electromagnetic (EM) modeling algorithm has been developed using finite element method (FEM) to acquire more efficient interpretation techniques of EM data. When FEM based on nodal elements is applied to EM problem, spurious solutions, so called 'vector parasite', are occurred due to the discontinuity of normal electric fields and may lead the completely erroneous results. Among the methods curing the spurious problem, this study adopts vector element of which basis function has the amplitude and direction. To reduce computational cost and required core memory, complex bi-conjugate gradient (CBCG) method is applied to solving complex symmetric matrix of FEM and point Jacobi method is used to accelerate convergence rate. To verify the developed 3-D EM modeling algorithm, its electric and magnetic field for a layered-earth model are compared with those of layered-earth solution. As we expected, the vector based FEM developed in this study does not cause ny vector parasite problem, while conventional nodal based FEM causes lots of errors due to the discontinuity of field variables. For testing the applicability to high frequencies 100 MHz is used as an operating frequency for the layer structure. Modeled fields calculated from developed code are also well matched with the layered-earth ones for a model with dielectric anomaly as well as conductive anomaly. In a vertical electric dipole source case, however, the discontinuity of field variables causes the conventional nodal based FEM to include a lot of errors due to the vector parasite. Even for the case, the vector based FEM gave almost the same results as the layered-earth solution. The magnetic fields induced by a dielectric anomaly at high frequencies show unique behaviors different from those by a conductive anomaly. Since our 3-D EM modeling code can reflect the effect from a dielectric anomaly as well as a conductive anomaly, it may be a groundwork not only to apply high frequency EM method to the field survey but also to analyze the fold data obtained by high frequency EM method.

• Journal of Bio-Environment Control
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2005

This study was carried out to file up using effect and requirement of energy for environmental design data of Pleurotus eryngii growing houses. Heating and cooling Degree-Hour (D-H) were calculated and compared for. some Pleurotus eryngii growing houses of sandwich-panel (permanent) o. arch-roofed(simple) type structures modified and suggested through field survey and analysis. Also thermal resistance (R-value) was calculated for the heat insulating and covering materials of the permanent and simple-type, which were made of polyurethane or polystyrene panel and $7\~8$ layers heat conservation cover wall. The variations of heating and cooling D-H simulated for Jinju area was nearly linearly proportional to the setting inside temperatures. The variations of cooling D-H was much more sensitive than those of heating D-H. Therefore, it was expected that the variations of required energy in accordance with setting temperature or actual temperature maintained inside of the cultivation house could be estimated and also the estimated results of heating and cooling D-H could be effectively used far the verification of environmental simulation as well as for the calculation of required energy amounts. When the cultivation floor areas are all equal, panel type houses to be constructed by various combinations of materials were found to by far more effective than simple type pipe house in the aspect of energy conservation maintenance except some additional cost invested initially. And also the energy effectiveness of multi-span house compared to single span together with the prediction of energy requirement depending on the level insulated for the wall and roof area could be estimated. Additionally, structural as well as environmental optimizations are expected to be possible by calculating periodical and/or seasonal energy requirements for those various combinations of insulation level and different climate conditions, etc.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.4
• /
• pp.687-714
• /
• 2009

In this paper, we study empirically the relations between financial constraints and dividend adjustment speed of innovative small and medium sized enterprises (SMEs) listed on Kosdaq Market of Korea Exchange. The main results of this study can be summarized as follows. Determinants suggested by the major theories of dividends, namely, residual dividend theory, dividend signaling theory, agency theory, catering theory, and transactions cost theory explain significantly the dividend payout policy of Kosdaq SMEs. Lintner's dividend adjustment model indicates that Kosdaq SMEs have long run target payout ratio, and that Kosdaq SMEs adjust partially the gap between actual and target payout ratio each year. In the core variables of Lintner (1956) dividend adjustment model, past DPS has more effect than current EPS. These results suggest that Kosdaq SMEs maintain stable dividend policy which maintain past DPS level without corporate special reasons. Dividend adjustment speed of innovative Kosdaq SMEs is more fast than that of uninnovative Kosdaq SMEs, and dividend adjustment speed of financial unconstrained innovative Kosdaq SMEs is faster than that of financial constrained innovative Kosdaq SMEs. Futhermore, dividend adjustment speed of innovative Kosdaq SMEs classified by Small and Medium Business Administration is faster than that of unclassified innovative Kosdaq SMEs. The former is linked with financial policies and services like credit guaranteed service, venture investment fund, insurance program, and so on. In conclusion, past DPS and current EPS suggested by the Lintner's dividend adjustment model explain mainly dividend adjustment speed, and financial constraints explain also partially. Therefore, if managers of innovative Kosdaq SMEs can properly understand of the effects of financial constraints on dividend smoothing, they can maintain constantly dividend policy. This is encouraging result for Korea government as it has implemented many policies to commit to innovative Kosdaq SMEs.

• Journal of Intelligence and Information Systems
• /
• v.18 no.2
• /
• pp.157-175
• /
• 2012

It is difficult to evaluate the performance of process innovation of e-procurement which has large scale and complex processes. The existing evaluation methods for measuring the effects of process innovation have been mainly done with statistically quantitative methods by analyzing operational data or with qualitative methods by conducting surveys and interviews. However, these methods have some limitations to evaluate the effects because the performance evaluation of e-procurement process innovation should consider the interactions among participants who are active either directly or indirectly through the processes. This study considers the e-procurement process as a complex system and develops a simulation model based on MAS(Multi-Agent System) to evaluate the effects of e-procurement process innovation. Multi-agent based simulation allows observing interaction patterns of objects in virtual world through relationship among objects and their behavioral mechanism. Agent-based simulation is suitable especially for complex business problems. In this study, we used Netlogo Version 4.1.3 as a MAS simulation tool which was developed in Northwestern University. To do this, we developed a interaction model of agents in MAS environment. We defined process agents and task agents, and assigned their behavioral characteristics. The developed simulation model was applied to G2B system (KONEPS: Korea ON-line E-Procurement System) of Public Procurement Service (PPS) in Korea and used to evaluate the innovation effects of the G2B system. KONEPS is a successfully established e-procurement system started in the year 2002. KONEPS is a representative e-Procurement system which integrates characteristics of e-commerce into government for business procurement activities. KONEPS deserves the international recognition considering the annual transaction volume of 56 billion dollars, daily exchanges of electronic documents, users consisted of 121,000 suppliers and 37,000 public organizations, and the 4.5 billion dollars of cost saving. For the simulation, we analyzed the e-procurement of process of KONEPS into eight sub processes such as 'process 1: search products and acquisition of proposal', 'process 2 : review the methods of contracts and item features', 'process 3 : a notice of bid', 'process 4 : registration and confirmation of qualification', 'process 5 : bidding', 'process 6 : a screening test', 'process 7 : contracts', and 'process 8 : invoice and payment'. For the parameter settings of the agents behavior, we collected some data from the transactional database of PPS and some information by conducting a survey. The used data for the simulation are 'participants (government organizations, local government organizations and public institutions)', 'the number of bidding per year', 'the number of total contracts', 'the number of shopping mall transactions', 'the rate of contracts between bidding and shopping mall', 'the successful bidding ratio', and the estimated time for each process. The comparison was done for the difference of time consumption between 'before the innovation (As-was)' and 'after the innovation (As-is).' The results showed that there were productivity improvements in every eight sub processes. The decrease ratio of 'average number of task processing' was 92.7% and the decrease ratio of 'average time of task processing' was 95.4% in entire processes when we use G2B system comparing to the conventional method. Also, this study found that the process innovation effect will be enhanced if the task process related to the 'contract' can be improved. This study shows the usability and possibility of using MAS in process innovation evaluation and its modeling.