• 보존과학회지
• /
• 제33권5호
• /
• pp.381-390
• /
• 2017

철제유물의 안정화처리는 탈염을 중점으로 하고 있으나, 부식인자 제거여부의 불확실성과 일부 유물의 제한적 적용 등으로 재부식과 같은 문제점이 지적되고 있다. 이를 보완하기 위한 부식억제제의 연구는 일부 보고된 바 있으며, 이 연구는 부식억제를 위한 수처리제 3종에 대한 연구결과이다. 부식억제제 피막이 형성된 시편의 표면관찰 결과 인산염이 주성분인 1종 2호의 시편은 표면의 녹층이 제거되었고, 재부식 시편의 중량 감소율 평균은 1종 2호의 경우 0.58%, 2종 2호의 경우 0.03%, 3종 2호의 경우 0.07%이며, 부식인자인 $Cl^-$ 이온의 변화량은 1종 2호는 28.60 ppm, 2종 2호는 -4.08 ppm, 3종 2호는 -1.94 ppm이었다. 수처리제의 피막에 대하여 XPS로 표면상태를 분석한 결과, 3종 2호보다 2종 2호에서 소지금속인 Fe가 낮게 검출되어 다소 우수한 피막을 유지하였고, Si함량에서도 규산염 기반의 2종 2호에서 상대적으로 함량이 높아 피막 형성이 우수하다고 판단된다. 인산염을 주성분으로 한 1종 2호는 표면의 녹층을 제거하여 금속유물 보존처리약품으로 부적합하고, 규산염을 주성분을 한 2종 2호와 3종 2호의 수처리제는 부식억제 효과가 우수하다고 평가된다. 부식억제제는 철제유물의 출토 당시에 긴급하게 사용할 수 있는 약품으로도 활용이 가능할 것이다.

• 대한화학회지
• /
• 제56권2호
• /
• pp.264-273
• /
• 2012

Five derivatives of phenylthiourea namely: 1-(4-methoxyphenyl)-3-phenylthiourea (1), 1-(4-methylphenyl)-3- phenylthiourea (2), 1-(4-bromophenyl)-3-phenylthiourea (3), 1-(4-chlorophenyl)-3-phenylthiourea (4) and 1-phenylthiourea (5) have been evaluated as new inhibitors for the corrosion of carbon steel in 2 M HCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization measurements showed that these derivatives are mixed-type inhibitors. The inhibition efficiency was found to increase with inhibitor concentration and decreases with rise in temperature. The thermodynamic parameters of adsorption and activation were determined and discussed. Nyquist plots showed depressed semicircles with their centre below real axis. The adsorption process of studied derivatives on carbon steel surface obeys Temkin adsorption isotherm. The synergistic effect of these derivatives and some anions is discussed from the viewpoint of adsorption models. The electrochemical results are in good agreement with the calculated quantum chemical HOMO and LUMO energies of the tested molecules.

• Corrosion Science and Technology
• /
• 제16권1호
• /
• pp.31-37
• /
• 2017

A synergistic effect was observed in the combination of nitrite and ethanolamines. Ethanolamine is one of the representative organic corrosion inhibitors and can be categorized as adsorption type. However, nitrosamines can form when amines mix with sodium nitrite. Since nitrosamine is a carcinogen, the co-addition of nitrite and ethanolamine will be not practical, and thus, a non-toxic combination of inhibitors shall be needed. In order to maximize the effect of monoethanolamine, we focused on the addition of molybdate. Molybdate has been used to alternate the addition of chromate, but it showed insufficient oxidizing power relative to corrosion inhibitors. This work evaluated the synergistic effect of the co-addition of molybdate and monoethanolamine, and its corrosion mechanism was elucidated. A high concentration of molybdate or monoethanolamine was needed to inhibit the corrosion of ductile cast iron in tap water, but in the case of the co-addition of molybdate and monoethanolamine, a synergistic effect was observed. This synergistic effect could be attributed to the molybdate that partly oxidizes the metallic surface and the monoethanolamine that is simultaneously adsorbed on the graphite surface. This adsorbed layer then acts as the barrier layer that mitigates galvanic corrosion between the graphite and the matrix.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.537-542
• /
• 2001

Recently long-span bridges, such as Kwang-Ahn Grand bridge, Seo-Hae Grand Bridge, Young-Jong Grand Bridge, etc, have been designed and constructed near the shore. It needs to maintain the durability of marine concrete structures which are exposed to severe chloride environments. It is well known that corrosion of reinforcement steels in concrete structure is the most important cause for the durability of concrete structure which can be controlled by systematic preparatory corrosion protection works for economic and safe infrastructures. Various corrosion protection systems have been used for the corrosion protection of reinforcement steels from detrimental chemical components such as chloride, sulphate and etc. Since chloride can be penetrated into concrete in a variety way, an effective method has to be adopted by taking into full economical aspects and technical data of each protection system. The objective of this experimental study is to investigate the corrosion behavior of reinforcing steel in laboratory concrete specimens which are exposed to cyclic wet and dry saltwater, and then to develop pertinent corrosion protection system, such as corrosion inhibitors and cathodic protection for reinforced concrete bridges exposed to chloride environment. Resistance of various corrosion inhibitors and impressed current system have been experimentally evaluated under severe environmental conditions, and thus effective corrosion protection systems could have been Practically developed for future concrete construction.

• Corrosion Science and Technology
• /
• 제8권1호
• /
• pp.1-10
• /
• 2009

The influence of Schiff bases on the corrosion inhibition of mild steel in 1 M $H_2SO_4$ have been investigated by weight loss, gasometry, impedance and polarization techniques. The results obtained reveal that these compounds act as good inhibitors. The inhibition efficiency of Schiff bases increased with concentration and synergistically increased on addition of chromate, sulphate and halide ions. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitors are of mixed type but they are more cathodic in nature. The adsorption of these compounds on mild steel surface for both the acids were found to obey Langmuir adsorption isotherm. The surface morphology was studied by SEM and UV reflectance spectra.

• 한국환경과학회지
• /
• 제11권5호
• /
• pp.411-418
• /
• 2002

The current study evaluated the disinfection efficiency of free chlorine and chloramine for microorganisms on various pipe materials, such as copper, galvanized steel, carbon steel, and stainless steel. In addition, the effect of internal pipe corrosion and corrosion inhibitors on the bactericidal efficiency was evaluated using a simulated loop. For disinfection with a phosphate corrosion inhibitor, chloramination was found to be more effective than chlorination due to its persistence. Free chlorine disinfection was optimized with a high phosphoric acid concentration, while chloramine disinfection was optimized with a high phosphoric acid or low polyphosphate concentration. In simulated copper and galvanized steel loop tests, chloramination with phosphoric acid was demonstrated to be more effective.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2022

In this study, the optimum amount of chloride ions is used to collaborate with hybrid corrosion inhibitor for carbon steel rebar treatment in simulated pore concrete (SCP) solution is discovered. The corrosion inhibition performance of hybrid inhibitors is carried on by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PP). The highest corrosion inhibition resistance is found in case of LP-C2 after 240 h exposure. Surface studies including scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used to figure out the surface morphology of the steel rebar treated with hybrid inhibitors in order to collaborate well with electrochemical studies. Anodic type inhibition action was confirmed by potentiodynamic polarization study.

• Corrosion Science and Technology
• /
• 제21권5호
• /
• pp.381-389
• /
• 2022

Cyclic Voltammetry and weight loss measurements were used to investigate corrosion prevention of tin in a 0.5M citric acid solution containing Anthocyanins extracted from grapes at various concentrations and temperatures. Results showed that the investigated chemicals, Anthocyanins extracted from grapes, performed well as tin corrosion inhibitors in 0.5M citric acid. Increasing the concentration of Anthocyanins increased their corrosion inhibition efficiencies. When the temperature dropped, their inhibition efficiencies, increased indicating that higher temperature tin dissolution predominated the adsorption of Anthocyanins at the surface of tin metal. When inhibitor concentrations were increased, their inhibition efficiencies were also increased. These results revealed that corrosion of tin metal was inhibited by a mixed type of adsorption on the metal surface. The adsorption isotherm of Langmuir governed the adsorption of Anthocyanins. Thermodynamic parameters such as the enthalpy of adsorption, the entropy of adsorption, and Gibbs free energy and kinetic parameters such as activation energy, enthalpy of activation, and entropy of activation were computed and discussed in this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.505-508
• /
• 2008

콘크리트는 다공성 재료로써 타설 직후부터 사용년한 동한 각종 환경에 노출되어 물리적 혹은 화학적인 영향을 받게 된다. 특히, 외부에 존재하는 황산염, 염화물 이온, 이산화탄소 등과 같은 유해성분들은 장기간에 걸쳐 용액 혹은 기체 상태로 콘크리트 내부로 침투되어 콘크리트 구성물들과 물리적 혹은 화학적 상호작용을 일으켜 콘크리트내에 매설된 철근의 부식을 야기 시켜 콘크리트의 내구년한과 내력을 감소시키게 된다. 따라서 철근위치까지 유해한 열화인자가 임계부식량을 초과하는 경우 방청성분을 철근위치까지 확실하게 침투시키는 것이 매우 중요하나, 현재와 같이 콘크리트 표면에 방청제를 도포하여 침투 시키는 기술개발만으로는 철근위치에서의 방청성 확보가 곤란한 실정이다. 본 연구진은 철근위치까지 방청제를 침투시키기 위한 연구개발을 추진하고 있으며, 이를 공학적으로 규명하기 위하여 압력 하에서 콘크리트내로의 수분이동과 같이 방청제에 따른 방청제 침투깊이를 명확히 규명할 필요가 있다. 이를 규명하기 위하여 모르타르를 사용하여 수압에 따른 침투깊이 및 침투량을 측정하여 침투량과 침투 깊이와의 관계 및 가압 시간에 따른 침투 깊이와 침투량을 실험을 통하여 측정하여 침투계수 및 확산계수를 산정하고 가압시간과 수압에 따른 모르타르내에 침투깊이를 예측하였다.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.6-13
• /
• 2004

The effect of inhibitors on the electrochemical behavior and the stress corrosion cracking resistance of Alloy 600(UNS N06600) was evaluated in 10% sodium hydroxide solution at $315^{\circ}C$. The specimens of a C-ring type for stress corrosion cracking test were polarized at 150 mV above the corrosion potential for 120 hours with and without inhibitors such as titanium oxide, titanium boride and cerium boride. The chemical compositions of the films formed on the crack tip in the C-ring specimens were analyzed using a scanning Auger electron spectroscopy. The cerium boride, the most effective, was observed to decrease the crack propagation rate more than a factor of three compared with that obtained in no inhibitor solution. It was found that the changes of the active-passive transition potentials and the film compositions were related to the resistance to stress corrosion cracking in high temperature caustic solution.