• 제목/요약/키워드: Corrosion Evaluation Index

검색결과 15건 처리시간 0.022초

상수원수의 부식평가 지수 산정 프로그램 개발 및 탄산칼슘 포화지수에 의한 수돗물의 부식성 평가 (Development of Corrosion Evaluation Index Calculation Program of Raw Water and Evaluation on Corrosivity of Tap Water using the Calcium Carbonate Saturation Index)

  • 황병기;우달식
    • 한국산학기술학회논문지
    • /
    • 제10권1호
    • /
    • pp.177-185
    • /
    • 2009
  • 본 연구에서는 상수원수의 부식성을 평가하기 위한 부식평가 지수 산정 프로그램을 개발하였다. 이를 한강 및 낙동강 수계에 적용하였을 때, 부식촉진 인자인 황산이온은 한강 수계에서 보다 낙동강 수계에서 더 높았으며, 부식제한 인자인 칼슘과 경도 또한 낙동강 수계가 높은 것으로 나타났다. LI와 CCPP를 산정한 결과를 요약하면 한강 수계의 수질이 부식성이 강한 즉, 부식을 촉진시키는 경향이 강한 것으로 나타났다. 이와 더불어 본 연구에서는 수돗물에 알칼리제를 주입하여 탄산칼슘 포화지수의 부식성을 평가한 결과, LI와 RI의 경우 $Ca(OH)_2$ > NaOH > ${Na_2}{CO_3}$ > $CaCO_3$의 순으로 포화상태를 유지하였다.

국내 수질에 적합한 부식성지수 선정 연구 (Evaluation of Corrosion Index by Water Quality Parameters in Korea)

  • 안경희;유순주;박수정;권오상
    • 한국물환경학회지
    • /
    • 제28권4호
    • /
    • pp.615-623
    • /
    • 2012
  • In this study, we evaluate the corrosion indexes (CI) such as Langelier Index (LI), Larson ratio (LR), Ryznar saturation index (RSI), Aggressiveness index (AI) of water quality for raw water, treated water and water in distribution reservoir at major eight drinking water treatment plants (DWTPs) in Korea. By analyzing secondary contamination of tap water, the variation of secondary contaminants was investigated with regard to pipe materials, aging and corrosion index (CI). In addition, we suggested an appropriate CI applicable water quality and the management plan for CI monitoriing. All CI showed corrosive water quality, and they did not change significantly in the distribution network. However, Copper (Cu), iron (Fe) and zinc (Zn) concentrations as secondary contaminants increased through the distribution network. Among CI, LI was most sensitive to changes in raw water quality and drinking water treatment. Also, it has high correlations with other indexes such as RSI, AI. Therefore, LI is considered as an appropriate CI to the domestic water quality. Based on these result, we propose LI as a drinking water quality standard to control the pipe corrosion from DWTPs.

Evaluation of High Order Statistical Parameter for Electrochemical Noise Analysis

  • Kim, Jong Jip
    • Corrosion Science and Technology
    • /
    • 제7권5호
    • /
    • pp.296-299
    • /
    • 2008
  • High order statistical parameters were evaluated using the electrochemical noise data collected during corrosion of type 430 stainless steel coupled to a inert, platinum electrode in 3.5% NaCl solution. High order statistical parameters are shown to predict uniform corrosion properly. However, Localization index, skewness of current, kurtosis and skewness of potential are capable of predicting pitting corrosion only when the transients are large with long life time. Of the high order statistical parameters evaluated, kurtosis of current is found to be the most sensitive parameter for detecting uniform and pitting corrosion.

상수원 관망 부식 제어를 위한 부식성 수질 관리: 북미지역 관리 사례 및 국외 현황 (The Regulations and Guidelines for Management of Corrosive Water and Pipe Corrosion in Drinking Water Distribution System in North America)

  • 김민희;현승훈;이원석
    • 한국물환경학회지
    • /
    • 제33권3호
    • /
    • pp.359-369
    • /
    • 2017
  • Water distribution systems supply drinking water to consumers' taps. Internal corrosion of metallic pipe used in drinking water distribution systems has reduced water quality and led to increased levels of toxic heavy metals such as lead, copper and nickel. These problems have been experienced to varying degrees by water utilities in many countries. North America has successfully managed and controlled pipe corrosion and corrosive water in water distribution system based on various policies, regulations and rules. Practical and engineering guidelines for evaluation of pipe corrosion and determination of treatment options are also provided to assist drinking water supplies. In addition, the corrosion mechanism in water distribution systems, such as the complex effects of physical and chemical parameters on the corrosion pipes has been improved to accurately predict corrosion rates of metallic pipes in actual water distribution systems. This paper reviews various regulations, policy statement, and treatment produces on controlling corrosion in drinking water distribution systems in US and Canada and then offers suggestion for management of corrosive water and pipe corrosion in drinking water distribution system in Korea.

상수도관로의 부식 방지를 위한 수돗물의 침식성 평가 (Evaluation on the Aggressivity of Drinking Water for Corrosion Control in Water Distribution System)

  • 곽필재;이현동;남상호
    • 상하수도학회지
    • /
    • 제11권1호
    • /
    • pp.53-63
    • /
    • 1997
  • The corrosion problems in water distribution system are reduced by decreasing the agressivity of drinking water which is evaluated by marble test and saturation indices(LSI or CCPP etc.). Marble test is a reliable method to determine the actual saturation condition of treated water. This study was done to determined the aggressivity of tap water and the effectiveness of $Ca(OH)_2$ and NaOH dosage for corrosion control. The drinking water in Seoul were evaluated by marble test and Langelier Index(LSI) and Calcium Carbonate Precipitation Potential(CCPP). The results indicated that the drinking water in Seoul were undersaturated as Calcium Carbonate($CaCO_3$). The LSI and CCPP of the water treated with $Ca(OH)_2$ were higher than that of water treated with NaOH. Therefore, to increase the Alkalinity and Calcium Hardness for corrosion control in water distribution system, $Ca(OH)_2$ is more effective than NaOH.

  • PDF

Application of fractals to study the corroded reinforced concrete beam

  • Fan, Y.F.;Zhou, J.;Hu, Z.Q.
    • Structural Engineering and Mechanics
    • /
    • 제20권3호
    • /
    • pp.265-277
    • /
    • 2005
  • This paper is focused on fractal analysis of the surface cracking, a new tool for safety evaluation of corroded reinforced concrete (RC) beams. Comprehensive experimental investigations, including flexural tests, coupon tests on strength evaluation of corroded concrete and rusty rebar, and pullout tests to determine bond strength between concrete and rebar were carried out on nine Corroded Reinforced Concrete Beams (CRCB) exposed to an aggressive environment for more than 10 years. In combination with test results from a previous study on CRCBs fabricated in the laboratory from accelerated methods, it is found that, for both types of beams, the surface cracking distributions are fractal in character at loading and failure stages. Fractal dimension is calculated for all specimens at different corrosion states based on fractal analysis method. Relationships between the fractal dimension and mechanical properties of corroded concrete, rebar corrosion ratio, and ductility of CRCBs are discussed in detail. It is concluded that the fractal dimension can act as a damage index and can be efficiently used to describe the corrosion state of CRCBs.

상수도관의 개량을 위한 시간에 따른 노후도 및 안전성 분석 (Safety analysis and deterioration evaluation of water pipe for improvement according to service year)

  • 권혁재;이경제
    • 한국수자원학회논문집
    • /
    • 제54권8호
    • /
    • pp.589-597
    • /
    • 2021
  • 본 논문에서는 부식깊이의 실측 데이터를 통해 부식깊이 예측식을 수립하고 상수관망의 노후도 및 안전도 등을 결정할 수 있는 운영인자를 수립하여 실제 관망에 적용하였다. 신뢰성해석과 운영인자 분석을 통해 노후도를 비교·분석 하였다. 신뢰성해석결과 가덕의 직경 200 mm 관의 경우 시간이 경과함에 따라 4.36%, 6.18%, 8.23%로 증가하는 것으로 나타났고 남이의 직경 200 mm 관의 경우 시간이 경과함에 따라 7.35%, 9.51%, 12.99%로 증가하는 것으로 나타났다. 운영인자를 결정하여 방사형 차트 면적을 통해 노후도를 비교한 결과 가덕은 1.009, 남이는 1.174로 남이 지역이 노후도가 큰 것으로 나타났다. 신뢰성해석과 운영인자를 통해 교체 우선순위를 결정할 수 있었다.

산화물 피복강재의 부식거동 및 밀착성 평가 (Evaluation on Corrosion Behaviour and Adhensivity of Oxide Coated Materials)

  • 이종락
    • 한국가스학회지
    • /
    • 제2권4호
    • /
    • pp.34-41
    • /
    • 1998
  • 순철과 스테인리스강 위에 $A1_2O_3,\;Ta_2O_5$$ZrO_2$의 산화물을 RF스파터링법으로 피복시켜, 피막과 모재와의 밀착성 평가, 피복강에 대한 부식거동 및 피막결함률에 대하여 고찰을 실시하였다. 미소경도시험에서 밀착성지수 $\chi$를 이용하여 산화물피막의 밀착성을 평가할 수 있었다. 임계부동화전류밀도법은 세라믹피복강재의 결함률을 평가하는데 유용한 수단임을 알 수 있었다.

  • PDF

국내 정수장의 부식성 특성 연구 (Study on corrosion characteristics of treatment plants in Korea)

  • 민병대;정현미;이이내;최인철;안경희;박주현
    • 상하수도학회지
    • /
    • 제30권6호
    • /
    • pp.707-714
    • /
    • 2016
  • In order to prevent secondary pollution of tap water, corrosion characteristics are investigated, and corrosion index are calculated using LI and LR to manage corrosiveness. As targeted water treatment plants from 2014 (July, once) to 2015 (July and October, 2 times), 70 plants are selected by making a division for each area and water system. (treated water samples, n=240, raw water samples, n=72). In result of pH analysis, treated water was lower than raw water to 7.12, and 7.29, respectively. LI were investigated in the order of Seomjin river, Nakdong river, Han river, Geum river, to -2.08, -1.24, -1.11, -1.10 (at raw water), and -2.18, -1.59, -1.51, -1.35 (at treated water), respectively. In case of water quality goal value (LI = -1) in Japan as control of corrosiveness, management object was investigated about 83.3%.