• International Journal of Safety
• /
• v.10 no.1
• /
• pp.5-9
• /
• 2011

Two popular activity coefficient models, Wilson and NRTL equations have been used to correlate the published flash point data on the n-propanol + propionic acid and n-butanol + propionic acid systems through the optimization method. The results of these correlation were compared with the results calculated by Raoult's law. The optimization method were found to be better than those based on the Raoult's law. The optimization method based on the Wilson equation described the published data more effectively than was the case when the optimization method was based upon the NRTL equation.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.399-404
• /
• 2013

This article proposes a digital image correlation (DIC) strain measurement method based on a finite element (FE) algorithm. A two-step digital image correlation is presented. In the first step, the gradient-based subpixels technique is used to search the displacements of a region of interest of the specimen, and then the strain fields are obtained by utilizing the finite element method in the second step. Both simulation and experiment processing, including tensile strain deformation, show that the proposed method can achieve nearly the same accuracy as the cubic spline interpolation method in most cases and higher accuracy in some cases, such as the simulations of uniaxial tension with and without noise. The results show that it also has a good noise-robustness. Finally, this method is used in the uniaxial tensile testing for Dahurian Larch wood specimens with or without a hole, and the obtained strain values are close to the results which were obtained from the strain gauge and the cubic spline interpolation method.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.93-104
• /
• 2004

The research subjects of this study were 30 unmarried Korean women from 20 to 29 who had never had an operation on their breast. Measurement method using plaster breast mold was used for measuring their volume of breast. The correlation between their breast volume and the methods to set up brassiere cups with the existing method and with their circumference of breast was analyzed using KendalI's Coefficient. which was to figure out a method which had a bigger correlation with the volume of breast between the method to set up brassiere cups using the existing method and the method using the circumference of breast. The results analyzed showed that the coefficient of correlation between the existing method and the volume of breast was .12 and the significance level was .45. They didn't have any correlation. On the other hand. the coefficient of correlation between the circumference of breast and the volume of breast was .82. which was very high values and the significance level was very high .0001. Therefore. it turned out that it was difficult to set up brassiere cups by using the existing method and it was easier and more reliable to set up the cups by using the circumference of breast.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.271-275
• /
• 2018

There are several methods for estimating the time delay between incoming signals to two sensors. Among them, the GCC-PHAT (Generalized Cross Correlation-Phase Transform) method, which estimates the relative delay from the signal whitening and the cross-correlation between the different signal inputs to the two sensors, is a traditionally well known method for achieving stable performance. In this paper, we have identified a part of GCC-PHAT that can improve the periodicity. Also, we apply the auto-correlation method that is widely used as a method to improve the periodicity. Comparing the proposed method with the GCC-PHAT method, we show that the proposed method improves the mean square error performance by 5 dB ~ 15 dB at the SNR above 0 dB for white Gaussian signal source and also show that the method improves the mean square error performance up to 15 dB at the SNR above 2 dB for the color signal source.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1519-1522
• /
• 2002

In this paper, we propose a new adaptive dissolve detection method based on the analysis of a dissolve modeling error that is the difference between an ideally modeled dissolve curve without any correlation and an actual variance curve with a correlation. The dissolve modeling error is determined based on a correlation between two scenes and variances for each scene. First, Candidate regions are extracted by using the characteristics of a parabola that is downward convex, then the candidate region will be verified based on a dissolve modeling error. If a dissolve modeling error on a candidate region is less than a threshold that is defined by a dissolve modeling error with a target correlation, the candidate region should be a dissolve region with a correlation less than the target correlation. The threshold is adaptively determined based on the variances between the candidate regions and the target correlation. By considering the correlation between neighbor scenes, the proposed method is able to be a semantic scene-change detector. The proposed algorithm was tested on various types of data and its performance proved to be more accurate and reliable when compared with other commonly used methods

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.600-607
• /
• 2011

As network traffic is dramatically increasing due to the popularization of Internet, the need for application traffic identification becomes important for the effective use of network resources. In this paper, we present an Internet application traffic identification method based on flow correlation to overcome limitation of signature-based identification methods and to improve performance (completeness) of it. The proposed method can identify unidentified flows from signature-based method using flow correlation between identified and unidentified flows. We propose four separate correlation methods such as Server-Client, Time, Host-Host, and Statistic correlation and describe a flow correlation-based identification system architecture which incorporates the four separate methods. Also we prove the feasibility and applicability of our proposed method by an acceptable experimental result.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.210-217
• /
• 2004

Developed is the new program that the reliability analysis can be performed more effectively considering the correlation of structural members about the cable stayed bridge. This program is formulated the stochastic finite element method suitable for the reliability analysis and the new safety evaluation method is proposed which is different from the existing one by the deterministic method or MCS response analysis. After conducting the initial equilibrium analysis of cable stayed bridges, the stochastic finite element is formulated through the perturbation method and the reliability analysis considering the correlation of stochastic variables is conducted. The results in various types of cable stayed bridge show that the probability of failure considering the correlation is larger than the non-correlation. The fan system is more stable than other systems at the structural response and the probability failure.

• International Journal of Quality Innovation
• /
• v.4 no.2
• /
• pp.16-31
• /
• 2003

A reducing variation of quality characteristics is a typical example of quality improvement. In such a case, we treat the quality characteristic, as a response variable and need to find active factors affecting the response from many candidate factors since reducing the variation of the response will be achieved by reducing variation of the active factors. In this paper, we first derive a method of selecting an active factor by linear regression. It is well known that correlation between factors deteriorates the precision of estimators. We, therefore, examine robustness of the selecting method against the correlation in the data set and derive an evaluation method of the deterioration brought by the correlation. Furthermore, some examples of selecting and evaluation methods are shown to demonstrate practical usage of the methods.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1059-1068
• /
• 2021

In urban areas, GPS(Global Positioning System)/GNSS(Global Navigation Satellite System) signals are blocked or distorted by structures such as buildings, which limits positioning. To compensate for this problem, in this paper, fingerprinting-based positioning using RSRP(: Reference Signal Received Power) information of LTE signals is performed. The W-KNN(Weighted - K Nearest Neighbors) technique, which is widely used in the positioning step of fingerprinting, yields different positioning performance results depending on the similarity distance calculation method and weighting method used in correlation. In this paper, the performance of the fingerprinting positioning according to the techniques used in correlation is comparatively analyzed experimentally.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.495-513
• /
• 2020

The correlation identification of the subsurface is a novel electrical prospecting method which could suppress stochastic noise. This method is increasingly being utilized by geophysicists. It achieves the frequency response of the underground media through division of the cross spectrum of the input & output signal and the auto spectrum of the input signal. This is subject to the spectral leakage when the cross spectrum and the auto spectrum are computed from cross correlation and autocorrelation function by Discrete Fourier Transformation (DFT, "To obtain an accurate frequency response of the earth system, we propose an improved correlation identification method which uses all phase Fast Fourier Transform (APFFT) to acquire the cross spectrum and the auto spectrum. Simulation and engineering application results show that compared to existing correlation identification algorithm the new approach demonstrates more precise frequency response, especially the phase response of the system under identification.