• Korean Journal of Agricultural Science
• /
• v.39 no.2
• /
• pp.271-277
• /
• 2012

Dimensions, operation conditions and improvement items for round roof windows were investigated in arch shape single-span plastic greenhouse with roof vents, and natural ventilation performance was analyzed based on the ventilation theory. Diameter of round roof windows was mostly 60 cm, and chimney height projected on roof was average 30 cm. Installation space was mostly 5 to 6 m but farmhouse of 10 m and over was 16.7% also. A round roof window which has 60 cm diameter was installed to 6 m space generally and 80 cm diameter was installed to 10 m space, but correct standards did not exist. There were a lot of opinions that ventilation effect of round roof windows is fairly good and user satisfaction is generally excellent. It is problem that there is few effects in summer and that vinyl around each vent tears well and rainwater leaks, and improvement hope item required development of automatic control system. In the wind speed of 0.3 m/s, it was estimated that natural ventilation rates were 0.69, 0.55, 0.50 and 0.48 volumes per minute in case of 2, 4, 6 and 8 m installation space for round roof windows, respectively. It was analyzed that the ratio of ventilation due to buoyancy out of total ventilation were 65.2, 41.9, 29.9 and 22.8% in case of 2, 4, 6 and 8m installation space, respectively. By the round roof windows installed at space of 6 m, ventilation rate was estimated to 0.5 volumes per minute, and we can expect the increase in ventilation rate of 30%. In order to meet the recommended ventilation rate for summer season, we have to install the round roof windows at space of 1 to 2 m. However, it is difficult to apply those installation space because of falling productivity due to lower light transmittance as well as rising costs. It is estimated that the installation space of 6m is appropriate for spring or fall season. Therefore it is necessary to encourage installing the roof windows in single-span plastic greenhouses.

• The Korean Journal of Emergency Medical Services
• /
• v.14 no.2
• /
• pp.41-55
• /
• 2010

Objective : This study is designed to present the direction and the necessity of education on the biomedical ethics the establish desirable ethical view of paramedic students by understanding on the consciousness of students of department of emergency medical technology on biomedical ethics on euthanasia. Method : Data were collected from on 335 students of department of emergency medical technology in 4-year-college located in districts of Chungcheong-do, from March 4 to April 22, 2010. The questionnaire consisted of total 29 items, i.e., 11 items of general characteristics, 11 items of characteristics related to biomedical ethics and 7 items of consciousness on euthanasia. Result : In general characteristics, the first grade showed the most dense distribution of 37.3%, the second grade was 20.0%, the third grade was 20.9% and the fourth grade was 21.8%. In the consciousness of biomedical ethics on euthanasia, the third and the fourth grades showed a higher ratio(${\chi}^2$ = 136.327, p= .000), in comparison with the first and the second grades, the higher year they were, the higher degree of consciousness they had. The consciousness on each item of euthanasia showed significant differences in grade (F = 8.203, p= .000), experience of clinical practice or none (t = 3.731, p= .000), experience of biomedical ethics education or none (t = 1.997, p = .047) and degree of consciousness on DNR (F = 8.240, p = .000) regarding 'CPR shall not be required in any cases if a patient wants DNR', in experience of biomedical ethics education or none (t = 2.452, p= .015) and degree of consciousness on DNR (F = 2.725, p = .044) regarding if a patient refuses all treatments, the patient's opinion shall be respected', and in degree of consciousness on DNR (F = 2.858, p = . 037) regarding 'after determination of DNR, if the family wants a positive treatment, it shall follow the family's request'. Conclusion : It seemed that the differences in consciousness according to grade and experience of clinical practice were influenced by experiences to treat patients in personally. Moreover, it showed that the higher grade they are, the more experience of education they have, the experiences of education had influences on the consciousness. Development of educational programs is required in order to supply accurate knowledge on biomedical ethics for euthanasia to lower-grade students the to let them establish ethical views properly, and in order to correct wrong knowledge and to establish ethical views while supplying knowledge on biomedical ethics for euthanasia to higher-grade students.

• Journal of Korea Water Resources Association
• /
• v.38 no.11
• /
• pp.917-925
• /
• 2005

LSIV (Large Scale Image Velcocimetry) Is one of the image-based velocity measurement techniques. Since it measures surface velocities, it gives simple and inexpensive way to measure velocity, compared to other methods. Because of these advantages, there have been many studies to apply LSIV to the river discharge measurement in the field. Measuring the discharge by using LSIV requires a method which converts a surface velocity to a mean velocity In the present study, experiments and analysis of vortical velocity profile of open-channel flow in various conditions were performed to develop methods which estimate a mean velocity from a surface velocity. The result of this experiment reveals that velocity-dip phenomena occur at free-surface layer in open channel flow and Froude number affects more than bed roughness does. Two methods for estimating the mean velocity were proposed. One is to correct the wake law's profiles by using the difference of surface velocity from the mean velocity, and the other is to use the ratio of mean and surface velocities. The result of applying these methods in an experiment shows that they are quite accurate having an error of approximately $6\%$ only.

• Communications of Mathematical Education
• /
• v.23 no.1
• /
• pp.145-174
• /
• 2009

Based on the thinking that people can understand more clearly when the problem is related with their prior knowledge, the Purpose of this study was to analysis students' informal knowledge, which is constructed through their mathematical experience in the context of real-world situations. According to this purpose, the following research questions were. 1) What is the characteristics of students' informal knowledge about fraction before formal fraction instruction in school? 2) What is the difference of informal knowledge of fraction according to reasoning ability and grade. To investigate these questions, 18 children of first, second and third grade(6 children per each grade) in C elementary school were selected. Among the various concept of fraction, part-whole fraction, quotient fraction, ratio fraction and measure fraction were selected for the interview. I recorded the interview on digital camera, drew up a protocol about interview contents, and analyzed and discussed them after numbering and comment. The conclusions are as follows: First, students already constructed informal knowledge before they learned formal knowledge about fraction. Among students' informal knowledge they knew correct concepts based on formal knowledge, but they also have ideas that would lead to misconceptions. Second, the informal knowledge constructed by children were different according to grade. This is because the informal knowledge is influenced by various experience on learning and everyday life. And the students having higher reasoning ability represented higher levels of knowledge. Third, because children are using informal knowledge from everyday life to learn formal knowledge, we should use these informal knowledge to instruct more efficiently.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.1
• /
• pp.9-18
• /
• 2018

Recently, the use of image stitching technology has been increasing as the number of contents based on virtual reality increases. Image Stitching is a method for matching multiple images to produce a high resolution image and a wide field of view image. The image stitching is used in various fields beyond the limitation of images generated from one camera. Image Stitching detects feature points and corresponding points to match multiple images, and calculates the homography among images using the RANSAC algorithm. Generally, corresponding points are needed for calculating conversion relation. However, the corresponding points include various types of noise that can be caused by false assumptions or errors about the conversion relationship. This noise is an obstacle to accurately predict the conversion relation. Therefore, RANSAC algorithm is used to construct an accurate conversion relationship from the outliers that interfere with the prediction of the model parameters because matching methods can usually occur incorrect correspondence points. In this paper, we propose an algorithm that extracts more accurate inliers and computes accurate transformation relations by using correspondence point relation information used in RANSAC algorithm. The correspondence point relation information uses distance ratio between corresponding points used in image matching. This paper aims to reduce the processing time while maintaining the same performance as RANSAC.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.518-526
• /
• 2007

There have been serious soil erosion and water pollution problems caused by highland agriculture practices at Doam-dam watershed. Especially agricultural activities, chemical and organic fertilizer and pesticide applications, soil reconditioning to maintain soil fertility are known as primary causes of soil erosion and water qaulity degradation in the receiving water bodies. Among these, soil reconditioning can accelerate soil erosion rates. To develop soil erosion prevention practices, it is necessary to estimate the soil erosion from the watershed. Thus, the Universal Soil Loss Equation (USLE) model has been developed and utilized to assess soil erosion. However, the USLE model cannot be used at watershed scale because it does not consider sediment delivery ratio (SDR) for watershed application. For this reason, the Sediment Assessment Tool for Effective Erosion Control (SA TEEC) was developed to assess the sediment yield at any point in the watershed. The USLE-based SA TEEC system can estimate the SDR using area-based SDR and slope-based SDR module. In this study, the SATEEC system was used to estimate soil erosion and sediment yield at the Doam-dam watershed using the soil properties from reconditioned agricultural fields. Based on the soil sampling and analysis, the US LE K factor was calculated and used in the SA TEEC system to analyze the possible errors of previous USLE application studies using soil properties from the digital soil map, and compared with that using soil properties obtained in this study. The estimated soil erosion at the Doam-dam watershed without using soil properties obtained in the soil sampling and analysis is 1,791,400 ton/year (123 ton/ha/year), while the soil erosion amount is 2,429,900 ton/year (166.8 ton/ha/year) with the use of soil properties from the soil sampling and analysis. There is 35 % increase in estimated soil erosion and sediment yield with the use of soil properties from soil reconditioned agricultural fields. Since significant amount of soil erosion are known to be occurring from the agricultural fields, the soil erosion and sediment yield from only agricultural fields was assessed. The soil erosion rate is 45.9 ton/ha/year without considering soil properties from soil reconditioned agricultural fields, while 105.3 ton/ha/year after considering soil properties obtained in this study, increased in 129%. This study shows that it is very important to use correct soil properties to assess soil erosion and sediment yield simulation. It is recommended that further studies are needed to develop environment friendly soil reconditioning method should be developed and implemented to decrease the speed of soil erosion rates and water quality degradation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.61-70
• /
• 2008

This paper designed the antenna for collecting and servicing the traffic information that apply to freeway Traffic Management System, as using DSRC (Dedicated Short Range Communication). Active DSRC is the technology that is using 5.8GHz Radio Frequency to a mean Sequency and there are a lot of the case occurring a physical electric wave shadowing because of the traveling straight of a electric wave. In such inferior communication environment, it constructed the stabilized communication link that can do collecting and servicing the correct traffic information and designed the beam pattern considering the establishment position of the antenna that can apply to various road environments and a communication area. By considering the communication link environment, this paper designed and manufacture the mean frequency of 5.8GHz, the input loss of -17dB in 75MHz bandwidth, the Axial ratio of 1.5:1, and $2{\times}4$ array microstrip antenna which beam pattern have the characteristic of $55^{\circ}$ horizontal half power beam width and $26^{\circ}$elevation half power beam width and the minimum establishment height of the antenna was designed as 14m for avoiding electric wave shadowing on a physical condition between vehicles

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.177-181
• /
• 1975

The pot experiment was conducted primarily to clarify the relationship between lime application and they amount of potassium for the basal and top dressings on paddy rice. (Orizae sativa L. cultivar; variety Jinheung) The soils mixed with lime and without lime were separately filled in to 0.2827 a. open-bottom concretepots. The soil with lime was treated with slaked lime, at two weeks before transplanting to correct soil pH. around 7.0. The total amount of potassium 12 kilograms per 10a was applied by two or three split doses during transplanting, 19 days after transplanting and primodial stages. The results of experiment obtained are summarized as follows: 1. The application of potash in the rate of 4kg per 10a or less for basal dressing and the remaining amount of potash for top dressing at 19 days after transplanting and primodial stage or one top dressing, at primodial stage have increased the yield of paddy with increased number of panicles per hill, milliequivalent ratio of $K^-/Ca^{++}+Mg^{++}$ in leaves in the later stage of growth, number of ripened grains per panicle, and rate of grain maturity. 2. On the other hand, the greater the amount of potassium given for the basal dressing (over 4kilograms per 10a), the smaller number of tillers and panicles were resulted. And the tendency was considered chiefly due to high salt concentration at the early stage of rice growth.

• Journal of Science Education
• /
• v.45 no.2
• /
• pp.247-256
• /
• 2021

Visual representation has been a useful tool in mathematical problem solving because it vividly express and structure the variables in the problem. But its effects may vary according to the types of problems. So, this study analyzes the survey results on the 5^th graders' visual representations using questionnaire consisting of the routine problems and the non-routine problems. The results are follows: The rate of correct answers in routine problems was higher than that of the non-routine problems. Even though the subjects were asked to solve the problem using visual representations, the ratio of solving the problem using the numerical expression was high in the routine problems. On the other hand, the rate of solving the problem using visual representation was high in the non-routine problems. The number of respondents who used visual representation in the non-routine problems was twice as many as that of the routine problems. But, among the subjects who used visual representation in the non-routine problems, the proportion of incorrect answers was also high, which resulted in using visual pictures. So, it is necessary to provide an experience that can use various types of the visual representations for problem solving and pay attention to the process of converting problems into visual representations.