• 한국전문물리치료학회지
• /
• 제21권1호
• /
• pp.37-46
• /
• 2014

Asymmetric sitting posture may cause asymmetric buttock pressure and unilateral low back pain (LBP). The purpose of this study was to compare the differences of buttock pressure between both sides, and pelvic angle (sagittal and coronal planes) during typing in a sitting position on a pressure mat (Baltube) in individuals with and without unilateral LBP. Ten subjects with unilateral LBP and ten subjects without unilateral LBP were recruited for this study. Buttock pressure was measured using a pressure mat and pelvic angles were measured using a palpation meter. The subjects performed typing in a sitting posture for 30 minutes. Pressure data were collected and averaged at initial term (from start to first minutes) and final term (last minutes of 30 minutes). Angles of pelvic tilting were measured after 30 minutes typing. Pressure asymmetry values (difference in pressure between both sides) were calculated at the initial and final terms. A two-way analysis of variance was used to compare the differences between the initial and final pressure asymmetry values in subjects with and without unilateral LBP. An independent t-test was applied to compare the pelvic tilt angles between the two groups. To compare the change of pressure from the initial term to the final term between the symptomatic and asymptomatic sides in the unilateral LBP group, a paired t-test was applied. In the unilateral LBP group, the pressure asymmetric value at the final term was significantly greater than that of the initial term (p<.05). The angle of pelvic tilting in coronal plane was significantly greater in the unilateral back pain group compared to the without unilateral LBP group (p<.05), however, there was no significant difference in the angle of pelvic tilting in the sagittal plane between the two groups (p>.05). In the unilateral LBP group, the change of pressure from the initial term to the final term was significantly less in the symptomatic side (-6.90 mmHg) than the asymptomatic side (5.10 mmHg). This asymmetric sitting posture may contribute to unilateral LBP in the sitting position. Further studies are needed to determine if asymmetric weight bearing in sitting causes unilateral LBP or if unilateral back pain causes asymmetric weight bearing, and if the correction of asymmetric weight bearing in sitting can reduce unilateral LBP.

• 한국방사선학회논문지
• /
• 제14권1호
• /
• pp.61-68
• /
• 2020

본 연구에서는 CT 혈관조영 영상에서 조영제 희석비율에 따른 Blooming 인공물 발생의 상관성에 대하여 알아보고자 한다. 3D 프린터를 이용하여 PLA(Poly Lactic Acid)재질의 구형 팬텀을 자체 제작하였고 구형 팬텀 내부에 조영제와 식염수의 비율을 100:0부터 10:90으로 희석하여 총 10세트를 준비하였다. 이후 CT 횡단면 영상을 얻고 raw 데이터를 최대강도투사법, 다중평면 재구성 기법으로 재구성하여 각각 횡단면, 시상면, 관상면의 영상을 얻었다. 검사 후 얻은 영상의 구형 팬텀의 직경을 각각 30회씩 총 1800회 측정하였다. 측정결과, 다중 평면 재구성 기법 중 관상면에서 20:80으로 희석하였을 때 20.47±0.05 mm로 가장 작게 측정되었다(p<0.05). 마찬가지로 최대강도투사법 중 시상면에서 20:80으로 희석하였을 때 20.39±0.08 mm로 가장 작게 측정되었다(p<0.05). 희석비율과 측정 크기의 상관성 분석에서는 모든 재구성 영상에서 강한 음의 상관성을 확인하였다(p<0.05). 결론적으로 조영제 희석비율이 높을수록 혈관의 실측을 측정하기 어려우며 이에 대한 원인으로 Blooming 인공물이 있음을 확인하였다. 따라서 실측에 관한 추후 연구에서 본 연구가 기초자료를 제공할 수 있을 것이라 사료된다.

• 대한한의진단학회지
• /
• 제10권2호
• /
• pp.121-131
• /
• 2006

Background : As each human has a look in the face of oneself, he or she has a look of him or herself in the shape of the body also. And for the shape of the body which gives a big clue in diagnosis in musculoskeletal disorders. Therefor many means are used and developed for diagnosis through body shape or posture analysis for musculoskeletal disorders. X-ray, CT, MRI has been used for diagnosis through image in this way to tell about the inside of the human body. On the other side, moire topography was used for information about the exterior of the human body, but yet only minimal information such as the number of contour lines in each side was available. Therefor there were a few studies to use moire topography or other methods to get information about the surface of the human body in numeric values. The instrument used in this study which is a laser projection moire, is another trial to get numeric data about the surface of the human body. The instrument is composed of laser projector and a computer software to recompose and analyse the image data into depth, height, angle and length. Objectives : The study was focused on whether the instrument is reliable for clinic use, and to seek the proper environment and posture for the examination, and among the data the software provides, which items are more reliable and useful. Methods : For reproductivity and repeatability, 4 testers tested 2 persons. And to how if the body shape changes according to the posture and which posture gives the most reliable data, the test was performed in 6 different positions. Results : Result, the instrument showed sufficient repeatability and reproductivity for clinical use. And among the items the software provides, the length of the back, the angle of the back in the sagittal and coronal plane showed reliable results. And there was difference in the results according to the posture, and Therefor, in following studies using this instrument or similar type of posture analysing instruments, the length of the back, the angle of the back in the sagittal and coronal plane could be reliable item to use.

• 대한관절경학회지
• /
• 제14권2호
• /
• pp.102-106
• /
• 2010

목적: 상부 관절와에 부착하는 관절와 순에 발생한 병변에 대한 봉합술 후의 결과가 모든 예에서 만족스러운 것은 아니다. 본 저자들은 상부 관절와 순의 치료에 도움이 되는 해부학적인 정보를 얻고자 견관절 자기 공명 영상 검사를 분석하고, 상부 관절와 순이 부착하는 부위의 관절와의 해부학적인 형태 및 부착 양상을 알아보고자 하였다. 대상 및 방법: 본원에서 견관절 자기 공명 영상 검사를 시행한 108예에서 관상면 영상을 분석하였다. 평균 연령은 52세(17~71세)였으며, 남자는 55예였고 여자는 53예였다. 일반적으로 상부 관절와 순 파열에서 봉합하게 되는 영역인, 이두건 장두의 관절와 부착 부위의 후방 2개 영상에서 관절와 순의 부착 부위의 길이 및 상외측 관절와의 단면 각도를 측정하였다. 결과: 상부 관절와 순의 관절와 전방 부착 부위의 내-외측 길이는 평균 $9.78{\pm}1.64\;mm$였다. 남자는 평균 $10.1{\pm}1.61\;mm$, 여자는 평균 $9.43{\pm}1.6\;mm$였다. 상외측 관절와의 각도는 평균 $89.6{\pm}7.6$도였다. 결론: 관상면에서의 상부 관절와 순의 부착 부위는 후방이 전방보다 짧다. 상외측 관절와의 각도는 후방이 전방보다 작았다.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.181-185
• /
• 2007

Purpose: Cleft lip and/or palate is the most common congenital facial anomaly whose incidence is about 1 in 500~1000 live births. As this anomaly may be associated with the serious chromosomal anomalies or the multiple organ abnormalities resulting in the fetal loss or perinatal maternal morbidity and mortality, careful prenatal counseling with early and accurate detection is important. Although conventional prenatal ultrasound(US) examination in midterm pregnancy has been applied for screening of cleft lip, there are definite limitations in the diagnosis of accompanying cleft palate or alveolar cleft. We applied high-resolution 3D US along the serial axial, coronal and sagittal plane so that we could diagnose the cleft palate and/or alveolar cleft in fetuses with cleft lip. Methods: From May 2005 to September 2005, 20 fetuses with cleft lip were examined with prenatal 3D US. Average maternal age was 28.8 years old(24-35 years old), and average gestational age was 24.8 weeks(17.6 to 34.2 weeks). Consecutive axial, coronal and sagittal multislice view were obtained via prenatal 3D US examination and diagnosis of cleft palate and/or alveolar cleft in cleft lip fetuses was followed. Results: With noninvasive and safe prenatal 3D US examination, 17 of 20 cleft lip fetuses were demonstrated to have cleft palate and/or alveolar cleft. Prenatal counseling according to the result was made. Conclusion: Existing prenatal US examination is suitable for screening the cleft lip fetuses but has limitation in identifying the related existence of cleft palate and/ or alveolar cleft. Authors verify the presence of cleft palate and/or alveolar cleft acquiring the successive multislice axial, coronal, and sagittal view with prenatal 3D US examination. Therefore, prenatal 3D US examination could be regarded as a noninvasive and secure screening modality in fetuses with cleft lip for confirming whether cleft palate and/or alveolar cleft is accompanied.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.604-609
• /
• 2017

Objective : An adjustable Ghajar guide is presented to improve the accuracy of the original Ghajar guide technique. The accuracy of the adjustable Ghajar guide technique is also investigated. Methods : The coronal adjustment angle from the orthogonal catheter trajectory at Kocher's point is determined based on coronal head images using an electronic picture archiving and communication system. For the adjustable Ghajar guide, a protractor is mounted on a C-shaped basal plate that is placed in contact with the margin of a burrhole, keeping the central $0^{\circ}$ line of the protractor orthogonal to the calvarial surface. A catheter guide, which is moved along the protractor and fixed at the pre-determined adjustment angle, is then used to guide the ventricular catheter into the frontal horn adjacent to the foramen of Monro. The adjustable Ghajar guide technique was applied to 20 patients, while a freehand technique based on the surface anatomy of the head was applied to another 47 patients. The accuracy of the ventricular catheter placement was then evaluated using postoperative computed tomography scans. Results : For the adjustable Ghajar guide technique (AGT) patients, the bicaudate index ranged from 0.23 to 0.33 ($mean{\pm}standard$ deviation [SD] : $0.27{\pm}0.03$) and the adjustment angle ranged from $0^{\circ}$ to $10^{\circ}$ ($mean{\pm}SD:5.2^{\circ}{\pm}3.2^{\circ}$). All the AGT patients experienced successful cerebrospinal fluid diversion with only one pass of the catheter. Optimal placement of the ventricular catheter in the ipsilateral frontal horn approximating the foramen of Monro (grade 1) was achieved in 19 patients (95.0%), while a suboptimal trajectory into a lateral corner of the frontal horn passing along a lateral wall of the frontal horn (grade 3) occurred in 1 patient (5.0%). Thus, the AGT patients experienced a significantly higher incidence of optimal catheter placement than the freehand catheterized patients (95.0% vs. 68.3%, p=0.024). Moreover, none of the AGT patients experienced any tract hemorrhages along the catheter or procedure-related complications. Conclusion : The proposed adjustable Ghajar guide technique, using angular adjustment in the coronal plane from the orthogonal trajectory at Kocher's point, facilitates accurate freehand placement of a ventricular catheter for hydrocephalic patients.

• Journal of Korean Neurosurgical Society
• /
• 제61권6호
• /
• pp.716-722
• /
• 2018

Objective : Lateral interbody fusion (LIF) is attractive as a less invasive technique to address anterior spinal pathology in the treatment of adult spinal deformity. Its own uses and benefits in treatment of adult degenerative scoliosis are undefined. To investigate the radiographic and clinical outcomes of LIF, and staged LIF and posterior spinal fusion (PSF) for the treatment of adult degenerative scoliosis patients, we analyzed radiographic and clinical outcomes of adult degenerative scoliosis patients who underwent LIF and posterior spinal fusion. Methods : Forty consecutive adult degenerative scoliosis patients who underwent LIF followed by staged PSF at a single institution were retrospectively reviewed. Long-standing 36" anterior-posterior and lateral radiographs were taken preoperatively, at inter-stage, 3 months, 1 year, and 2 years after surgery were reviewed. Outcomes were assessed through the visual analogue scale (VAS), 36-Item Short Form Health Survey (SF-36), and Oswestry Disability Index (ODI). Results : Forty patients with a mean age of 66.3 (range, 49-79) met inclusion criteria. A mean of 3.8 levels (range, 2-5) were fused using LIF, while a mean of 9.0 levels (range, 3-16) were fused during the posterior approach. The mean time between stages was 1.4 days (range, 1-6). The mean follow-up was 19.6 months. Lumbar lordosis was significantly restored from $36.4^{\circ}$ preoperatively up to $48.9^{\circ}$ (71.4% of total correction) after LIF and $53.9^{\circ}$ after PSF. Lumbar coronal Cobb was prominently improved from $38.6^{\circ}$ preoperatively to $24.1^{\circ}$ (55.8% of total correction) after LIF, $12.6^{\circ}$ after PSF respectively. The mean pelvic incidence-lumbar lordosis mismatch was markedly improved from $22.2^{\circ}$ preoperatively to $8.1^{\circ}$ (86.5% of total correction) after LIF, $5.9^{\circ}$ after PSF. Correction of coronal imbalance and sagittal vertebral axis did not reach significance. The rate of perioperative complication was 37.5%. Five patients underwent revision surgery due to wound infection. No major perioperative medical complications occurred. At last follow-up, there were significant improvements in VAS, SF-36 Physical Component Summary and ODI scores. Conclusion : LIF provides significant corrections in the coronal and sagittal plane in the patients with adult degenerative scoliosis. However, LIF combined with staged PSF provides more excellent radiographic and clinical outcomes, with reduced perioperative risk in the treatment of adult degenerative scoliosis.

• 한국의학물리학회지:의학물리
• /
• 제20권4호
• /
• pp.298-307
• /
• 2009

본 연구는 MR T2 map기법을 이용하여 슬관절염이 없는 건강한 사람과 관절염이 있는 환자의 연골의 T2값 변화를 측정하여 슬관절 연골의 형태 및 손상 정도를 평가하고 아울러 T2 map기법의 유용성에 대하여 고찰해 보고자 한다. 과거 병력 및 현재 임상적으로 슬관절염이 없는 건강한 사람 30명과 2007년 11월부터 2008년 12월까지 무릎 통증으로 내원한 환자 중 단순 방사선 촬영에서 슬관절염 소견이 보이는 환자 30명을 대상으로 multi-echo 방식(TR: 1,000 ms, TE values (6.5, 13, 19.5, 26, 32.5. 40, 45.5, 52))인 T2 SE (spin echo) sequence를 이용하여 슬관절 연골 T2 SE 영상을 획득 하였다. 획득한 영상을 바탕으로 슬관절 연골 내 구역별 신호강도(S.I)의 변화를 측정하고 이를 Origin 7.0 Professional (northampton, MA 01060 USA)을 이용하여 평균 T2값을 산출하였다. 산출된 T2값은 독립표본검정(Independent samples T-test, SPSS win 12.0)을 이용하여 건강한 그룹과 슬관절염 그룹에 대한 정량적 분석을 시행, 통계적 유의성을 검증하였다. 건강한 그룹과 슬관절염 그룹의 시상면과 관상면의 내, 외측 관절연골에 대한 각각의 T2 값은 시상면에서는 대퇴연골의 경우 슬관절염 그룹의 평균 T2값($42.22{\pm}2.91$)이 건강한 그룹의 평균 T2값($36.26{\pm}5.01$)보다 크게 나타났고 경골 연골의 경우도 슬관절염 그룹의 평균 T2값($43.83{\pm}1.43$)이 건강한 그룹의 평균 T2값($36.45{\pm}3.15$)보다 크게 나타났다. 관상면에서는 내측 대퇴연골의 경우 슬관절염 그룹의 평균 T2값($45.65{\pm}7.10$)이 건강한 그룹의 평균 T2값($36.49{\pm}8.41$)보다 크게 나타났고 내측 경골 연골의 경우도 슬관절염 그룹의 평균 T2값($44.46{\pm}3.44$)이 건강한 그룹의 평균 T2값($37.61{\pm}1.97$)보다 크게 나타났다. 외측 대퇴연골의 경우 슬관절염 그룹의 평균 T2값($43.41{\pm}4.99$)이 건강한 그룹의 평균 T2값($37.64{\pm}4.02$)보다 크게 나타났고 외측 경골 연골의 경우도 슬관절염 그룹의 평균 T2값($43.78{\pm}8.08$)이 건강한 그룹의 평균 T2값($36.62{\pm}7.81$) 보다 크게 나타났다. 슬관절염이 있는 환자인 경우 T2 map기법을 이용하여 지금까지 사용되었던 형태학적 MR 영상화 방법과 더불어 연골의 구조적, 기능적 변화를 정량적으로 분석함으로써 연골질환의 조기 진단에 큰 도움을 줄 수 있을 것이라 사료된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권4호
• /
• pp.231-239
• /
• 2012

Objectives: This study sought to provide guidelines in order to decrease the incidence of nerve injury during mandibular ramus bone harvesting, and to improve understanding of the anatomical structure of the inferior alveolar canal (IAC) to include its distance from the exterior buccal cortex. Materials and Methods: In January and February 2009, 20 patients who visited the Wonkwang University Department of Oral and Maxillofacial Surgery reporting various conditions underwent cone beam computed tomography and were included in this study. Patients with missing left or right mandibular first molars or incisors, or who had jaw fracture or bone pathologies, were excluded. The reference point (R point) was defined as the point where the occlusal plane reached the anterior ramus of the mandible. The position of the IAC in relation to the R point, the buccal bone width (BW), the alveolar crest distance (ACD), the distance from the alveolar crest to the occlusal plane (COD), and the distance from the IAC to the sagittal plane (CS) were determined using proprietary image analysis software which produced cross-sectional coronal and axial images. Results: The distance medially from the R point to the IAC along the axial plane was $6.19{\pm}1.21mm$. The HD from the R point, posteriorly to IAC, in the lateral view was $13.07{\pm}2.45mm$, the VD from the R point was $14.24{\pm}2.41mm$, and the ND from the R point was $10.12{\pm}1.76mm$. The pathway of the IAC was positioned almost in a straight line along a sagittal plane within $0.56{\pm}0.70mm$. The distance from the buccal bone surface to the IAC increased anteriorly from the R point. Conclusion: Marking osteotomy lines in the retromolar area in procedures involving bone harvesting should be discouraged due to the risk of damage to IAC structures. Our measurements indicated that the area from the R point in the ramus of the mandible to 10 mm anterior can be safely harvested for bone grafting purposes.

• Archives of Plastic Surgery
• /
• 제44권1호
• /
• pp.19-25
• /
• 2017

Background Numerous condylar repositioning methods have been reported. However, most of them are 2-dimensional or are complex procedures that require a longer operation time and a highly trained surgeon. This study aims to introduce a new technique using a condylar repositioning plate and a centric relation splint to achieve a centric relationship. Methods We evaluated 387 patients who had undergone surgery for skeletal jaw deformities. During the operation, a centric relation splint, intermediate splint, final centric occlusion splint, and condylar repositioning plate along with an L-type mini-plate for LeFort I osteotomy or a bicortical screw for bilateral sagittal split ramus osteotomy were utilized for rigid fixation. The evaluation included: a physical examination to detect preoperative and postoperative temporomandibular joint dysfunction, 3-dimensional computed tomography and oblique transcranial temporomandibular joint radiography to measure 3-dimensional condylar head movement, and posteroanterior and lateral cephalometric radiography to measure the preoperative and postoperative movement of the bony segment and relapse rate. Results A 0.3% relapse rate was observed in the coronal plane, and a 2.8% relapse rate in the sagittal plane, which is indistinguishable from the dental relapse rate in orthodontic treatment. The condylar repositioning plate could not fully prevent movement of the condylar head, but the relapse rate was minimal, implying that the movement of the condylar head was within tolerable limits. Conclusions Our condylar repositioning method using a centric relation splint and miniplate in orthognathic surgery was found to be simple and effective for patients suffering from skeletal jaw deformities.