• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3880-3884
• /
• 2010

In this paper, circularly polarized micro-strip GPS antenna has been designed and fabricated. In order to improve of frequency properties, patch size, corner truncated size and feed positions were simulated using HFSS simulation program. Micro-strip GPS antenna was fabricated on the FR4 substrate of dielectric constant 4.4. The fabricated GPS antenna has that center frequency is 1.575GHz and insertion loss is -34.50dB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.563-567
• /
• 2010

In this paper, circularly polarized micro-strip GPS of 1.57 GHz and DMB of 2.63~2.65GHz antenna have been studied. In order to improve of frequency properties, parameters such as patch size, corner truncated type, and feed positions were simulated using HFSS program. GPS and DMB antenna were fabricated and characteristics were measured using network analyzer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1159-1165
• /
• 2008

In this paper, a single-feed equilateral-triangular microstrip antenna with truncated corners is used for achieving diverse radiation polarization. The proposed antenna is excited by a microstrip line, which is place parallel to an oblique side of the equilateral-triangular patch. Depending on whether the three identically-sized comers of the triangular patch are cut or not, the equilateral-triangular microstrip antenna shows linear polarization(LP) or left-hand circular polarization(LHCP) or Tight-hand circular polarization(RHCP). Based on the equilateral-triangular microstrip antenna with truncated corners, a novel reconfigurable microstrip antenna with switchable polarization sense is also proposed. The proposed reconfigurable antenna has a simple structure, consisting of a corner-truncated triangular patch, a small triangular conductor, and a microstrip line. Using a biased PIN diode between the patch and the small triangular conductor, it can produce LP or RHCP according to bias voltages. From the measured results, low cross polarization level when operated in the linear state and good axial ratio in the circular state are observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1299-1305
• /
• 2002

Tx/Rx dual microstrip array antennas for satellite communications are designed, fabricated, and measured in this paper. They have a Right Handed Circular Polarization (RHCP) for Tx and Left Handed Circular Polarization (LHCP) for Rx. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 2${\times}$1 sequential rotation mays are applied. From the measured results, 8${\times}$1 microstrip may antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to satellite communication antennas, active phased may antennas, and radiators in other antennas.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.128-132
• /
• 2015

In this paper, a microstrip dual mode band pass filter with doubly fed line is proposed. The proposed filter consists of a corner truncated patch with right crossed slots and doubly fed lines. In general, the resonator with the right crossed slots simultaneously has size reduction and spurious response suppression. In order to improve the rejection performance in out of its higher stop band, the dual mode resonator is excited by using doubly fed line. Details of the filter characteristics are described, and both simulated and measured results of the designed filter are presented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.235-240
• /
• 2005

This paper presents a dual band circularly polarized microstrip patch antenna. The antenna consists of two corner truncated patches implemented in one plane and single feed point. The input signal is directly excited to the patch 2 and the patch 1 is fed from patch 2 by coupling between two patches. The antenna is operated at 900 MHz and 2.45 GHz bands and has the right hand circularly polarized radiation pattern at all. The measured gains of the antenna are 2.95 dBic at 900 MHz band and 4.6 dBic at 2.45 GHz band.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.28-33
• /
• 2002

The LHCP circularly polarized antenna operating at DBS band is developed by employing the sequential-rotation technique in which each subarray is comprised the three truncated-corner patch square element. Antenna designed with sequentially-related technique whose M=3, p=2 has the effect of improved axial-ratio bandwidth, cross-polarization etc. And it is proved that the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Antenna designed shows extremely low side lobe level of below - 25 dB in the diagonal plane and cross-polarization level of below -20 dB in the all plane. And these performances comply with the array antenna specification for DBS.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.418-422
• /
• 2003

In this paper a dual-band circularly polarized stacked microstrip antenna for Global Positioning System (GPS) service and Digital Multimedia Broadcasting (DMB) service is designed. By stacking two different corner-truncated square microstrip patches, dual-band, dual polarization characteristic is obtained. Experimental results show impedance bandwidth of 60 MHz (3.8%) and axial ratio bandwidth of 6 MHz (0.4%) in GPS and impedance bandwidth of 126 MHz (4.7%) and axial ratio bandwidth of 30MHz (1.1%) in DMB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.164-171
• /
• 2014

Transmit(Tx)/Receive(Rx) dual band operation microstrip array for X-band satellite communications are designed, fabricated, and measured in this paper. The microstrip array antenna has Right Handed Circular Polarization(RHCP) for Tx band and Left Hand Circular Polarization(LHCP) for Rx band. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, $2{\times}2$ sequential rotation array are applied. From the measured result, $8{\times}12$ microstrip array antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to military satellite communication antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.