• Transactions on Electrical and Electronic Materials
• /
• 제17권6호
• /
• pp.363-368
• /
• 2016

Rectangular shape detection plays an important role in many image recognition systems. However, it requires continued research for its improved performance. In this study, we propose a strong rectangular shape detection algorithm, which combines the canny edge and line detection algorithms based on the perpendicularity and parallelism of a rectangle. First, we use the canny edge detection algorithm in order to obtain an image edge map. We then find the edge of the contour by using the connected component and find each edge contour from the edge map by using a DP (douglas-peucker) algorithm, and convert the contour into a polyline segment by using a DP algorithm. Each of the segments is compared with each other to calculate parallelism, whether or not the segment intersects the perpendicularity intersecting corner necessary to detect the rectangular shape. Using the perpendicularity and the parallelism, the four best line segments are selected and whether a determined the rectangular shape about the combination. According to the result of the experiment, the proposed rectangular shape detection algorithm strongly showed the size, location, direction, and color of the various objects. In addition, the proposed algorithm is applied to the license plate detecting and it wants to show the strength of the results.

• 한국항해항만학회지
• /
• 제27권3호
• /
• pp.267-272
• /
• 2003

This paper describes design method of Passive-type Radar Reflector (PRR) which is to provide the requirement of newly revised 2000 SOLAS regulations on the Radar Reflector. The main target of this work is to find the optimum shape of a radar target having large Radar Cross Section (RCS). Through the RCS analysis based on the theoretical approach, two kinds of PRR models, RRR-F model for use in fisheries and PRR-S model for use in small sized ship, are designed and discussed their RCS performance. RCS measurement tests for the various sized samples are carried out in an anechoic chamber. As evaluation results it was clearly shown that the conventional sphere-type shows optimum shape in case of PRR-S, while the cylinder-type which consists of large sized corner clusters or zig-zag flat plats gives best performance in case of PRR-F.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.138-141
• /
• 2008

This paper treats the development of a new type of deep draught semisubmersible offshore structural shape that has excellent heave motion response and less down-time. This new type of semisubmersible shape is characterized by heave dampers at each pontoon corner and appropriate column size adjustment to achieve the desired cancellation and resonance motion period. It was found that the final model had efficient workability, based on the wavescatter diagrams for the GoM and North Atlantic ocean, due to less heave motion, although the specific heave response at the 100 year return period wave condition in the North Atlantic was more or less increased.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.480-481
• /
• 2015

반파장 길이를 가지는 일반적인 마이크로스트립 안테나는 작은 대역폭 특성을 가진다. 패치 안테나의 모서리를 적절하게 잘라내면 입력 임피던스가 변하여 이에 상응하는 광대역 특성을 얻을 수 있다. 본 논문에서는 2.4GHz ISM 대역에서 동작하는 광대역 마이크로스트립 패치 안테나를 대상으로 패치 안테나의 모서리 단면의 모양에 따른 입력 임피던스의 변화를 통하여 광대역 특성을 얻을 수 있도록 설계하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.352-356
• /
• 1998

This paper is a study about Ac servo motor position and speed control characteristics which depend on feedforward control, the acceleration / deceleration time constant after the interpolation, and PI control, automatic deceleration at corner in order to shape cutting control of feed drive system of the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control. The shape error generated by the position command delay is minimized by using the acceleration / deceleration time constant after the interpolation. The results were verified to optical machining center experimentation of the machine tool.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.353-362
• /
• 2012

In this paper decay and mapped elastodynamic infinite elements, based on modified Bessel shape functions and appropriate for Soil-Structure Interaction problems are described and discussed. These elements can be treated as a new form of the recently proposed Elastodynamic Infinite Elements with United Shape Functions (EIEUSF) infinite elements. The formulation of 2D horizontal type infinite elements (HIE) is demonstrated, but by similar techniques 2D vertical (VIE) and 2D corner (CIE) infinite elements can also be formulated. It is demonstrated that the application of the elastodynamical infinite elements is the easier and appropriate way to achieve an adequate simulation including basic aspects of Soil-Structure Interaction. Continuity along the artificial boundary (the line between finite and infinite elements) is discussed as well and the application of the proposed elastodynamical infinite elements in the Finite Element Method is explained in brief. Finally, a numerical example shows the computational efficiency of the proposed infinite elements.

• 한국지반공학회지:지반
• /
• 제14권3호
• /
• pp.73-94
• /
• 1998

사면보강 또는 굴착면의 안정성 확보를 위해 쏘일례일링 공법이 종종 적용되고 있다. 그러나 오목형태 또는 볼록형태 모서리부와 같은 특수한 지역에 쏘일네일링 공법이 적용되어질 경우, 편기각보강형태, 즉 skew 쏘일네일 형태로 주로 시공쥐고 있다. 하지만, 지금까지 skew 쏘일례일링 공법이 적용된 굴착 모서리부에 대한 3차원 안정해석 및 거동분석 등에 대한 실험이나 연구결과는 미흡한 실정이며, 따라서 보강재의 배치형태, 삽입각도 및 길이 등 관련 설계변수값 결정에 관하여 주로 경험에 의존하고 있는 실정이다. 따글윽 본 연구의 주된 목적은, skew 쏘일네일링 공법이 오목형태 굴착 모서리부에 적용되는 경우 이에 대한 3차원 한계평형 안정성 평가기법을 제시하는 데 있다. 3차원 예상 파괴흙쐐기의 형상은 FLAC 프로그램 모델링 및 해석을 통해 결정하였으며, 모서리부에 대한 3차원 침투수압 산정식의 제시 및 해석시 다층지반조건의 고려 등이 포함되었다. 또한 제시된 3차원 안정해석법 을 이용해, 관련 설계변수들의 모서리부 안정성에 미치는 영향 정도를 분석하였다. 아울러 기 제시된 볼록형태 굴착 모서리부의 3차원 안정해석 법을 이용해 skew 쏘일네일 보강패턴의 효율성을 분석하였으며, 또한 굴착과정을 통해 전면부 벽체변위 및 인접지반의 침하 등이 상대적으로 문 제시되는 볼록형태 굴착 모서리부에 대한 변위예측을 위해 준 3차원 유한요소 해석기법 및 중첩기법 등의 적용을 시도하였다.

• 소성∙가공
• /
• 제17권3호
• /
• pp.218-224
• /
• 2008

A recent trend in automotive parts has been an integration of sub-assemblies with unified shapes. Tube structures also have been integrated to one body structure by using a near net shape forming instead of adopting welding. A cylindrical elastomer-forming process can be utilized to form a steel tube compressed in a radial direction. This process has some advantages compared to a hydro-forming or a swaging process in the viewpoint of a lower investment and a higher productivity. In order to predict a feasible specification of products within a work capability of the elastomer-forming equipment developed previously, effects of geometrical parameters of a tube on its shape accuracy are examined. Two characteristic parameters to account for the shape accuracy are chosen. One is the curvature radius at the corner part and the other is the straight ratio of the formed region. Careful examination of two parameters has led that the shape accuracy can be easily predicted by the regression equation obtained from the response surface method.

• 한국유체기계학회 논문집
• /
• 제18권2호
• /
• pp.5-13
• /
• 2015

The aim of this study is to investigate the feasibility of a new type of casing for the inline Francis hydro turbine. Comparing with the traditional turbine with spiral casing, this turbine is unique for its flow passage shape at the first stage of flow to the turbine, very similar to a pipe, called inline casing. Before the commercialization of this new type of casing, a global investigation of the inline casing must be conducted. Preserving the structural characteristics of simple, compact-size and convenient for manufacture, different shapes of the belt passage, vertical corner and stay vanes are applied to investigate the influence of flow passage shape on the turbine performance. Stable and relatively high efficiency is achieved regardless of flow passage shape difference proving the feasibility of the inline casing used in a hydro turbine.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.325-331
• /
• 2004

Generally, the buckling of thin-walled structures has studied for rectangular sections or circular sections. Rectangular sections have small stiffness and circular sections have large stiffness when they are compared with rectangular sections for local buckling. But both of them have similar stiffness to column buckling. Therefore in this paper, we are going to analyze the local buckling for the box section with rounded comer and compare with rectangular section. Also we confirm that the rounded comer section has larger local buckling strength than rectangular section.