• Advances in materials Research
• /
• v.3 no.3
• /
• pp.129-137
• /
• 2014

Biocomposites from polypropylene (PP) and corn cob (CC) were investigated. The effect of corn cob content and maleic anhydride polypropylene (MAPP) as compatibilizer were studied. Results showed that addition of corn cob (CC) in PP have decreased the tensile strength and elongation at break, whereas modulus of elasticity of biocomposites increased. The biocomposites with the MAPP as compatibilizer exhibited higher tensile strength and modulus of elasticity compared biocomposites without MAPP. The morphology study of biocomposites indicates that enhanced the interfacial interaction and adhesion between filler and matrix with the presence of MAPP.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1469-1474
• /
• 2005

The objective of this study was to determine the levels of nutritionally related blood metabolites, age and body weight at puberty in gilts fed on corn cob-based diet in Mukota and Landrace${\times}$Mukota crossbred gilts. Ten gilts of each of Mukota and crossbred genotypes were fed two diets for 14 weeks in a 2${\times}$2 (breed${\times}$diet) factorial treatment arrangement. A corn-cob based diet, designed to contain 2,304 kcal ME/kg, and a standard pig grower diet, were used. The corn cob constituted 20 percent of the total ration. Fortnightly, bodyweights and feed conversion ratios (FCR) were recorded. Blood samples were collected to determine blood glucose, urea and creatinine levels. The average daily bodyweight gain (ADG) in the Mukota was lower (p<0.05) than in the crossbred gilts. Crossbred gilts fed on the corn cob-based diet had lower (p<0.05) urea values from eight weeks from the start of the experiment (p<0.05) compared to Mukota gilts fed the same diet. There were no differences in blood glucose and creatinine concentrations between diets and genotypes. The lack of differences in the nutritionally-related blood metabolites suggest that corn cobs could be incorporated at 20 percent inclusion without compromising blood metabolite concentrations and age at puberty of the Mukota and Landrace${\times}$Mukota gilts.

• Journal of Forest and Environmental Science
• /
• v.37 no.1
• /
• pp.79-89
• /
• 2021

Cement bonded boards of 10 mm in thickness were produced from the mixture of Gmelina arborea sawdust and corn cob particles. The strength and dimensional stability of cement bonded composites produced from these two mixtures were examined. A total of thirty experimental boards were produced at density level of 1,000 kg/㎥ with cement to fibre ratio of 2.5:1 and 3:1 and five (5) blending proportions of G. arborea sawdust to corn cob particles of 100:0; 75:25; 50:50; 25:75 and 100:0. The effect of the cement to fibre ratio and blending proportion on the Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR), and Modulus of Elasticity (MOE) were determined. The result indicates that as the mixing ratio of cement to fibre and blending proportion of maize cob (75%) to G. arborea (25%) increased, the thickness swelling, water absorption decreased, whereas the MOR and MOE increased. It also shows that most dimensionally stable and flexural strength boards were produced at the highest level of mixing ratios (3:1) and blending proportion of G. arborea to corn cob 25:75. However, the analysis of variance shows that TS and WA were significantly different, whereas, MOE and MOR were not significantly affected by mixing ratios and blending proportions. Finding of this study has shown that maize cob particles are suitable for cement bonded board production.

• Journal of Applied Biological Chemistry
• /
• v.58 no.4
• /
• pp.339-344
• /
• 2015

In this study, the quality characteristics of purple corn cob extract (PCCE) by extraction time were examined. The cob of purple corn, which is mainly cultivated in the Andes region of South America, contains more anthocyanin than the corresponding purple corn seeds. The aim of this study was to determine the optimal conditions for the preparation of water extracts from purple corn cob. PCCE had a soluble solid content of $0.6^{\circ}Brix$. The Hunter lightness ($L^*$), redness ($a^*$), yellowness ($b^*$) values of the PCCE were 31.0, 38.4, and 9.0, respectively. The PCCE contained 24.64 mg/g of cyanidin, 0.35 mg/g of pelargonidin, and 17.42 mg/g peonidin, and showed greater antioxidant activity than the other extracts. Therefore, the optimal extracting conditions for preparing PCCE were a temperature of $30^{\circ}C$ and an extraction time of 24 h.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.107-116
• /
• 2023

In this study, to explore the possibility of using discarded by-products of corn as a wrinkle-improving functional material, the active ingredient contained in each part including kernel, cob, husk, and silk of 10 varieties of chodang and waxy corn was identified and the content was analyzed to suggest the possibility of corn by-products as upcycling materials. As a result of evaluating the collagen synthesis efficacy of extracts by part, the cob in chodang and waxy corns showed significant activity at 100 ㎍/mL concentration of 176.5 and 140.0%, respectively. The LC-MS/MS qualitative analysis resulted in the identification of 18 components in the cob, of which N, N'-diferuloylputrescine (DFP) was selected as an active ingredient, and the quantitative analysis was conducted by variety and part. As a result, DFP was confirmed only in the cob and kernel, and it was most frequently detected in the cob of the Goldsugar of chodang corn (39.6 ㎍/g) and Daehakchal of waxy corn (38.4 ㎍/g). The cob is a by-product left over from grain removal, and is expected to create new added value as a material that promotes collagen synthesis. Through this study, we propose the possibility of using discarded cob as a wrinkle-improving functional material.

• Korean Journal of Food Science and Technology
• /
• v.13 no.1
• /
• pp.53-56
• /
• 1981

Several tests were conducted to study lipoxygenase activity and off-flavor developement in frozen sweet corn. Fresh corn contained about 60% of total lipoxygenase activity in the germ section. When non-blanched frozen sweet corn was stored at $-10^{\circ}F$, it developed off-flavor and most significant changes in the flavor profile of off-flavored sweet corn was $4{\sim}5$ times higher hexanal peaks. The high hexanal peaks observed in the sterilized sweet corn with added lipoxygenase, alone and in combination with other enzymes, suggested the fact that high hexanal peaks in off-flavored sweet corn could be due to an oxidative reaction of lionleic acid (and other unsaturated fatty acids) catalyzed by lipoxygenase. Based on lipoxygenase activity and linoleic acid content in sweet corn, this reaction occur most heavily in the germ section of sweet corn. There was a significant relationship between flavor score of frozen stored corn-on-the-cob and hexanal peak in the germ section of corn-on-the-cob. This result indicated that hexanal peak could be used as an objective index of off-flavor development in frozen sweet corn.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.171-178
• /
• 1999

The purpose of this study was to investigate the optimal mixture ratio for the mycelial culture of the Pleurotus ostreatus. The chief cultural media in this study were cotton hull, sawdust and rice straw and the supplemental media were zeolite, corn cob, defatted rice bran, white cotton, tobacco trash powder, rice hull and peat. The results of this study were as follows; the optimal mixture ratio of the chief cultural media were effective in 6 : 3 : 1(V/V, %), and the mycelial growth and density in the supplemental media were considerably better 1% zeolite,3% corn cob, 5% defatted rice bran, 1% white cotton, 1% tobacco trash powder, 7% rice hull in good order. The optimal mixture ratio be to the mixed supplemental media in the chief cultural media were as follows ; 2 : 2(V/V, %) at the conditions of mixed zeolite and corn cob; 3 : 2(V/V, %) at the conditions of mixed defatted rice bran and white cotton; 1 : 3(V/V, %) at the conditions of mixed tobacco trash powder and rice hull. At the conditions of the whole cultural media mixed, the mycelial growth and density were in good conditions ; cotton hull, sawdust, rice straw, zeolite, corn cob, defatted rice bran, white cotton, tobacco trash powder, rice hull, and peat were mixed 43.0 : 17.2 : 25.8 : 2.0 : 2.0 : 3.0 : 2.0 : 1.0 : 3.0 : 1.0 (V/V, %).

• Journal of Biosystems Engineering
• /
• v.14 no.1
• /
• pp.33-40
• /
• 1989

The flow properties of water added com-cob-mix(CCM) were studied in order to provide basic information for designing its pumping system. For the study, a model system similar to actual situation was constructed. From the experiment, it can be concluded that the flow properties of the water added CCM has close relationship with its moisture content as follows; 1. The pressure drop caused by friction was very low when the moisture content of water added CCM was more than 70%. However, when the moisture content of the material is about 60%, the pressure drop increases up to 10 kPa/m at low pumping speed, and 20 kPa/m at high pumping speed, respectively. 2. The water added CCM having about 65% moisture content showed pseudo-plastic flow characteristics. 3. As the moisture content of the material decreases, the shear stress increases more rapidly than the shear rate does. Finally, below approximately 60% moisture, the shear stress becomes a linear relationship with the shear rate. 4. It was possible to pump the material having the moisture content down to 58% through a pipe having 80 mm diameter by a pump operating at 234 rpm. However, by either increasing the diameter of the pipe or decreasing the pumping speed, it can be possible to pump the material having lower moisture content than 55%.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2020

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24^th and the silking date was July 27^th, but the P2105 variety was late to July 28^th and August 1^st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.47-47
• /
• 2014

In order to explore mycelial growth and fruiting body formation of Lyophyllum decates on different media, ten cultivation media by using cottonseed hull, sawdust, corn cob etc. as main components were designed for seven strains. The results showed that the mycelial colour of all strains are mainly snow-white, and the formula of media using corn cob as main materials was better than that using cottonseed hull and sawdust for mycelial growth, but no fruiting body was formed. The cottonseed hull medium with a small amount of sawdust, plant leaves, humus or fermented material and wheat was beneficial for fruiting formation. The incubation period for fruiting formation of strain 3001 was 108 days and the highest yield was-214.80 g/bag. Fructification of the strains tasted occurs successively in order of 3001, 1035, 1004 and 1013. It was concluded that different medium composition had significant effect on the mycelial growth and fruiting body formation.