• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.111-119
• /
• 2013

Eleven mycotoxins, including aflatoxins, ochratoxin A, fumonisins, zearalenone, T-2 toxin, deoxynivalenol, and HT-2 toxin, were analyzed simultaneously in rice, barley, and maize produced in 2011 by liquid chromatography coupled with triple quadrupole mass spectrometry (LC/MS/MS). Limits of detection (LOD) are 0.2 ${\mu}g/kg$ for aflatoxin $B_1$, and $G_1$, 0.3 ${\mu}g/kg$ for aflatoxins $B_2$, and $G_2$, 0.1 ${\mu}g/kg$ for ochratoxin, fumonisins, zearalenone, and T-2 toxin and 3.0 ${\mu}g/kg$ for deoxynivalenol and HT-2 toxin. Limits of quantification (LOQ) were 0.6 ${\mu}g/kg$ for aflatoxins $B_1$, and $G_1$, 0.9 ${\mu}g/kg$ for aflatoxins $B_2$, and $G_2$, 0.3 ${\mu}g/kg$ for ochratoxin, fumonisins, zearalenone, and T-2 toxin and 10.0 ${\mu}g/kg$ for deoxynivalenol and HT-2 toxin. Recoveries for 11 mycotoxins ranged from 70.45 to 111.11%. Fumonisins, deoxynivalenol, and zaeralenone were detected from 0.9 to 334.0 ${\mu}g/kg$ in the polished rice, barley and raw corn cultivated in Korea. Other mycotoxins were not detected. Deoxynivalenol contamination was mainly found in barley (24 out of 43 samples) and the average value in positive samples was 113.30 ${\mu}g/kg$.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.402-406
• /
• 2014

The present study was carried out to evaluate the potential of lignocellulosic byproducts for the production of citric acid through solid-state fermentation by Aspergillus niger NRRL 567. A sequential optimization based on one-factor-at-a-time method was applied to optimize fermentation conditions and media constituents. The results obtained from the optimization indicated that $30^{\circ}C$, 70% moisture content, 0.5~1.0 mm particle size, pH 5.5 and 4% methanol were found to be the optimum condition at 72 hr fermentation. The application the optimization resulted in an improvement of maximum citric acid production from 74.5 to 206.0 g/kg dry material (DM) from wheat straw. The optimal condition was used to produce citric acid from A. niger grown on different lignocellulosic byproducts, including wheat straw, corn stover and peat moss. A. niger produced the highest citric acid levels of 231.8, 213.8 and 240.2 g/kg DM at 120 hr fermentation, respectively.

• Korean Journal of Remote Sensing
• /
• v.27 no.4
• /
• pp.481-494
• /
• 2011

Investigation of the $CO_2$ exchange between biosphere and atmosphere at regional, continental, and global scales can be directed to combining remote sensing with carbon cycle process to estimate vegetation productivity. NASA Earth Observing System (EOS) currently produces a regular global estimate of gross primary productivity (GPP) and annual net primary productivity (NPP) of the entire terrestrial earth surface at 1 km spatial resolution. While the MODIS GPP algorithm uses meteorological data provided by the NASA Data Assimilation Office (DAO), the sub-pixel heterogeneity or complex terrain are generally reflected due to coarse spatial resolutions of the DAO data (a resolution of $1{\circ}\;{\times}\;1.25{\circ}$). In this study, we estimated inputs retrieved from MODIS products of the AQUA and TERRA satellites with 5 km spatial resolution for the purpose of finer GPP and/or NPP determinations. The derivatives included temperature, VPD, and solar radiation. Seven AmeriFlux data located in the Corn Belt region were obtained to use for evaluation of the input data from MODIS. MODIS-derived air temperature values showed a good agreement with ground-based observations. The mean error (ME) and coefficient of correlation (R) ranged from $-0.9^{\circ}C$ to $+5.2^{\circ}C$ and from 0.83 to 0.98, respectively. VPD somewhat coarsely agreed with tower observations (ME = -183.8 Pa ~ +382.1 Pa; R = 0.51 ~ 0.92). While MODIS-derived shortwave radiation showed a good correlation with observations, it was slightly overestimated (ME = -0.4 MJ $day^{-1}$ ~ +7.9 MJ $day^{-1}$; R = 0.67 ~ 0.97). Our results indicate that the use of inputs derived MODIS atmosphere and land products can provide a useful tool for estimating crop GPP.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.966-978
• /
• 1993

A power operated 90.5 hp electric motor) grain flour separator was designed and developed for separation of grain (wheat, corn, chickpea and soybean) flour into various fractions based on the size of the particles of the product. The separator agitating mechanism, feed control, cylindrical separator unit and an eccentric mechanism. The machine was tested for wheat ( variety ; Sujata) flour separation into four fractions, viz ; semolina, Gr-I and II, flour (coarse) and white (fine) flour. Wheat samples (6.8% m.c., db) were first pearled by CIAE pearler for 15.8% bran removal . The pearled wheat grains were then milled for semolina by a burre mill. The product and machine characteristics were determined at different capacities varying from 24 kg/h to 143 kg/h. It was found that 76 kg/h capacity gave reasonably best results in terms of purity and recovery of semolina vis-a-vis the market product. The energy requirement of the machine at no-load was found to be 230 W and at load c nditions, it varied between 36.3-6.4 KJ per kg of fead seperation. The macine could be used by small flour millers small/medium size traders and retailers and other processors for making available various flour products of different particle size in the market for ready use of the consumers.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.43-47
• /
• 2004

We have been using Moisture Barrier Bags for dry packing of semiconductor packages to prevent moisture from absorbing during shipping. Moisture barrier bag material is required to be waterproof, vapor proof and offer superior ESD (Electro-static discharge) and EMI shielding. Also, the bag should be formed easily to the shape of products for vacuum packing while providing excellent puncture resistance and offer very low gas ＆ moisture permeation. There are some problems like pinholes and punctured bags after sealing and before the surface mount process. This failure may easily result in package pop corn crack during board mounting. The bags should be developed to meet the requirements of excellent electrical and physical properties by means of optimization of their raw material composition and their thickness. This study investigates the performance of moisture barrier bags by characterization of their mechanical endurance, tensile strength and through thermal analysis. By this study, we arrived at a robust material composition (polyester/Aluminate) for better packing.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.215-223
• /
• 2006

The internal corrosion of water distribution systems is the main cause for the problem of the public health threat as well as water leakage in the damaged pipeline, red water, and odor and taste of the tap water. This study was examined the effect of chemicals used for pH and alkalinity control and corrosion inhibitors for producing the optimal corrosion control method. Corrosion study at different pH and alkalinity indicated that these control using alkaline chemicals was effective in corrosion rate, Fe release reduction, but examined to be increased in turbidity and corrosion-by-products(TTHMs) problems. The turbidity was slightly increased, requiring caution in controlling corrosion with $Ca(OH)_2$. At pH 9.0, TTHMs concentration is increased two times corn pared with non-control of pH. Using the pipe which had experienced 28 years of exposure, iron release was decreased with the corrosion inhibitor. Consequently, pH, Alkalinity control method using alkaline chemicals must be complemented by corrosion inhibitor application for efficient corrosion control.

• Journal of Applied Biological Chemistry
• /
• v.57 no.4
• /
• pp.313-320
• /
• 2014

Black liquor (BL) is a by-product of rice straw pulping process. It is a low costs raw material for production value-adding proteins and enzymes, which has been paid more and more attention to reduce its environmental pollution. Mixed cultures of micelial fungi, Trichoderma reesei Northern Regional Research Laboratory (NRRL)11236, Trichoderma reesei NRRL 6165 and Aspergillus niger strains NRC 5A, NRC 7A, and NRC 9A were evaluated for their ability to produce xylanase using crude hemicellulose (CHC) prepared from BL and peat moss as an inert support under solid state fermentation (SSF). The most potent strains, A. niger NRC 9A (818.26 U/g CHC) and T. reesei NRRL 6165 ($100.9{\pm}57.14$ U/g CHC), were used in a mixed culture to enhance xylanase production by co-culturing under SSF. In the mixed culture, xylanase production ($1070.52{\pm}12.57$ U/g CHC) was nearly1.3 and 10.6-fold increases over the activities attained in their monocultures, A. niger NRC 9A and T. reesei NRRL 6165, respectively. Optimization of the culture parameters of the mixed culture SSF process, concentration of ammonium sulfate and corn steep liquor, CHC/peat moss ratio, inoculum size and ratios of the two strains, initial pH value, initial moisture content and incubation time, exhibited a significant increase ($2414.98{\pm}84.02$ U/g CHC) in xylanase production than before optimization.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.4 s.54
• /
• pp.25-33
• /
• 2004

Acrylamide, difficult to analyze by GC and GC/MS due to the polarity and low volatility, was analyzed by LC/ESI/MS in the study. Acrylamide its(molecular weight 71amu) showed m/z=72 $(M+H)^+$ and high peak intensity at 22V in SIR mode. The mass spectrum ratios of acrylamide for qualitative identification had m/z=72 in precursor ion and m/z=55 in products ion, respectively. Those ratios at 30V in SIR mode ranged from 1: 1.4 to 1:1.17 despite various acrylamide concentrations. The ion intensity ratios of acrylamide $(m/z=72,\; [M+H]^+)$ to acrylamide isotopes $(m/z=73,\;[M+H]^+)$ ranged from 100 : 3.57 to 100 : 3.92. The results verified theoretical mass spectrum ratio that was 100:3.82. The linearity of standard calibration curve was y : 520.584x + 1815.26 with $r^2=0.99.$ In quality assurance and quality control, the recovery rate ranged from 81.64 percent to 90.97 percent and relative standard deviation was less than $10\%$ with 5 repeated injections at individual standard calibration solutions. The method was applied to analyze acrylamide in food at grocery stores. Snacks made of potatoes showed the highest acrylamide concentration followed by products made of French fries, wheat, and corn.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.7 no.1
• /
• pp.43-52
• /
• 1978

It is well known that water holding capacity plays an important role in processing such meat products as frankfurter-type sausage and fish meat paste products as kamaboko and fish sausage. Consumer qualities of meat products, such as appearance, flavor, as well as drip and shrinkage on cooking, depend greatly on the degree of water binding. In this paper, the water holding capacities of fish paste and salt added paste of white corvenia, Argyrosomus argentatus and file fish, Novodon modestus were measured by centrifuging and press method before and after cooking. And the effects of the addition of phosphates and starch to enhance water binding and stabilize gel formation were also discussed. In addition, the experimental conditions which are suitable to determine the water binding of fish meat paste product were suggested. The results were expressed in percent of water absorbed by the filter paper when pressed or released by pressor or centrifuge to the weight of sample. From the results. a proper condition to measure the water holding capacity of fish meat paste was that 3.0 g of sample which was previously added with 10 percent water was centrifuged at 13,400 G or 12,000 rpm for 15 minutes for the centriguging method and for press method, 0.3 g sample with 10 percent of water added was extracted by an oil pressor at $30\;kg/cm^2$ for 1 minute. Water holding capacity of fresh paste of white corvenia was relatively higher than that of file fish and the difference between species of fish was greater than the difference between measurments by two methods. Sodium chloride had a great effect on enhancing the water holding capacity of fish meat paste giving better effect when 3.0 percent of salt was added. Phosphates used except calcium phosphate revealed a certain enhancement in water binding, yielding best effect at 0.3 percent addition, and metaphosphate seemed to be more effective in order. The addition of corn starch, however, appeared to be not so effective for enhancement of water binding in fresh-salt-added fish meat paste but in cooked fish paste which might be attributed to absorption of water by starch grain and swelling during the heating and consequently enforced gel strength of cooked fish paste. And the water holding capacity of cooked fish paste was proportionally related to its gel strength.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.979-983
• /
• 1993

A power operated (0.5 hp electric motor) grain flour separator was designed and developed for separation of grain (wheat, corn, chickpea and soybean) flour it no various fractions based on the size of the particles of the product. The separator is made of mild steel and consists of a hopper, power driven agitating mechanism, feed control , cylindrical separator unit and an eccentric mechanism. The machine was tested for wheat (variety : Subjata) flour separation into four fraction, viz : semolina ; Gr-I and II, flour (coarse) and white (fine) flour. Wheat samples (6.8% m.c., db) were first pearled by CIAE pearler for 15.8% bran removal . The product and machine characteristics were determined at different capacities varying from 24 kg/h to 143 kg/h. It was found that 76 kg/h capacity gave reasonably best results in terms of purity and recovery of semolina vis-a-vis the market product. The energy requirement of the machine at no-load was found to be 230 w and at load conditio s, it varied between 36.3-6.4kj per kg of feed separation. The machine could be used by small flour millers, small/medium size traders and retailers and other processors for making available various flour products of different particle size in the market for ready use fo the consumers.