• 한국항행학회논문지
• /
• 제15권2호
• /
• pp.281-286
• /
• 2011

데이터 정렬은 현대 사회에 존재하는 수많은 디지털 데이터에 대한 중요한 가공 작업 중의 하나이지만, 데이터가 방대할수록 정렬 과정 자체도 많은 연산시간을 소비한다. 본 논문에서 데이터 배열을 분할하여 PC에 있는 CPU와 GPU에서 각각 동시에 정렬을 수행하는 혼합 정렬 알고리즘을 제안하였다. 각 장치의 처리 성능을 바탕으로 가장 효율적인 배열의 분할 범위를 결정하고 각각 분할된 영역을 CPU와 GPU에서 동시에 정렬함으로써 전체 정렬 시간을 단축시켰다. 실험결과에서 알 수 있듯 혼합 정렬이 GPU만 활용한 정렬보다 8%이상 정렬 수행 속도를 향상시켰다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.618-620
• /
• 1997

A $50{\times}50{\mu}m^2$ aluminum micromirror array is fabricated using shadow evaporation process. The fabrication process is very simple with use of shadow evaporation process, and the micromirror array has a high fill-factor. The static and dynamic characteristics such as deflection angle vs. applied voltage, step response, and frequency response are measured using a contact free optical measurement technique. The downward threshold voltage was 8 V, step response time was $13.5{\mu}s$ when 32 V step voltage applied, and a resonance observed at 11kHz. The lifetime of micromirror with anti-stiction coating was tested and micromirror operated successfully over 200 million cycles of touch-down operations.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.71-76
• /
• 2022

We evaluated and developed a 6th generation large-size polisher in the type of face-up and Oscar. We removed the hillocks of the low temperature poly-silicon (LTPS) thin film with this polisher. The surface roughness of LTPS was lowered from 7.9 nm to 0.6 nm after CMP(chemical mechanical polishing). The thickness of the LTPS is measured through reflectance in real time during polishing, and the polishing process is completed according to this thickness. The within glass non-uniformity (WIGNU) was 6.2% and the glass-to-glass non-uniformity (GTGNU) was 2.5%, targeting the LTPS thickness of 400Å. In addition, the residual slurry after the CMP process was removed through the Core Flow PVA Brush and alkaline chemical.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2279-2282
• /
• 2007

Highly crystalline, uniform Fe nanoparticles were successfully synthesized and encapsulated in zirconia shell using sol-gel process. Two different approaches have been employed for the coating of Fe nanoparticle with zirconia. The thickness of zirconia shell can be readily controlled by altering molar ratio of Fe nanoparticle core to zirconia precursor in the first case where as reaction time was found to be most effective parameter to controlled the shell thickness in the second method. The structure and magnetic properties of the ZrO2-coated Fe nanoparticles were studied. TEM and HRTEM images show a typical core/shell structure in which spherical α-iron crystal sized of ~25 nm is surrounded by amorphous ZrO2 coating layer. TGA study showed an evidence of weight loss of less than 2% over the temperature range of 50-500 °C. The nanoparticles are basically in ferromagnetic state and their magnetic properties depend strongly on annealing temperature. The thermal treatment carried out in as-prepared sample resulted in reduction of coercivity and an increase in saturation magnetization. X-ray diffraction experiments on the samples after annealing at 400-600 °C indicate that the size of the Fe@ZrO2 particles is increased slightly with increasing annealing temperature, indicating the ZrO2 coating layer is effective to interrupt growing of iron particle according to heat treatment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.199-202
• /
• 1999

Many processing times for fabricating complex shaped parts by near net shape process such as thixoforming or semi-solid forming, are required due to the time for die design, induction heating and forming process. Therefore, for the thixoforming process, multi-capacity induction heating process is very important due to the reduction of the processing time and cost. It is indispensable to adopt a power-time heating pattern which manages to conciliate complete eutectic melting at the core with limited overheating at the periphery. The total reheating time is thus dependent on billet diameter; in inches$(pm20%)$. Typically, high frequency is used for the rapid reheating of the billet to the eutectic temperature range and low frequency for the remelting of the desired fraction of liquid and for the radial homogeneization of the liquid fraction. So in this study, the multi-capacity induction heating conditions of ALTHIX 86s alloy to reduce the processing time and cost would be proposed. The suitability of multi-capacity induction heating conditions would be verified through the comparison to Garat's data.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1731-1735
• /
• 2021

The operation of the nuclear reactor requires accurate and fast methods and techniques for analysing its kinetics. These techniques become even more important when the MOX-fuel is used due to the lower value of delayed neutron fraction 𝛽 for ²³⁹Pu. Based on a Birth-and-Death process review, the mathematical model of thermal reactor core has been proposed different from existing ones. The analytical method for thermal point-reactor parameters evaluation is described within this work. The proposed method is applied for analysis of the unsteady transient processes taking place in a thermal reactor at its start-up or shutdown power change, as well as during small accidental power variation from the rated value. Theoretical determination of MASURCA reactor core reactivity through the analysis of experimental data on neutron time spectra was made.

• 한국건설관리학회논문집
• /
• 제5권2호
• /
• pp.194-201
• /
• 2004

코어월 선행공사는 공기단축, 비용 절감 효과 등과 같은 이점 등으로 인하여 국내 초고층건물공사에서 널리 적용되고 있다. 그러나 본 연구에서 수행한 사례조사연구에 따르면 초고층건물 코어월 선행공사 수행 과정에서 작업 공간 및 작업 동선 등의 미확보로 인한 생산성 저하, 코어월 선행공사의 세부 작업 및 양중장비 등의 작업 간섭으로 인한 공기 지연, 추가 가설 공사 및 비용 발생, 콘크리트 타설 작업의 지연 등으로 인한 공사비 증가와 공기 지 연 등의 문제가 발생하고 있었다. 이러한 문제의 발생원인을 분석한 결과, 시공계획 과정에서 좀더 치밀하고 세심한 주의를 기울여서 계획을 수립하고 공사에 임했을 경우, 이것들의 상당수는 발생을 미연에 방지할 수 있음을 알 수 있었다. 이에 본 연구에서는 이러한 문제점들을 해결하기 위한 기초 단계로서 시공계획 과정에서의 도급자와 하도급자간의 협력체계 개선 방향과 시공계획 과정의 개선 방향 등을 제안하였다.

• 연구논문집
• /
• 통권34호
• /
• pp.121-129
• /
• 2004

The influence of powder size and ball-milling time on the magnetic properties of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ nanocrystalline alloy powder was investigated. Flake-shaped powders were produced by pulverizing the ribbons annealed at $550^\circC$ for 1 hour. The powders were classified and consolidated into core shapes at a pressure of 18ton/$cm^2$. The initial permeability at 100kHz of the inductor core produced using $53-75\mum$ powders showed the highest value although its consolidated density showed the lowest one. The reason for the result is due to the cracking of the particles larger than $75\mum$ during the consolidation process. The ball-milling of powders for 2-4 hours improved the consolidation density and the initial permeability of the cores. The intrinsic coercivity of the powder decreased as well, resulting from the stress relief of the powder by a short-time milling.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.377-383
• /
• 2019

Targeting at simulating the application of thorium-uranium (TU) fuel in the CANDU-6 reactor, this paper analyzes the process using the code DRAGON/DONJON where the discrete TU fuel pins are applied in the CANDU-6 reactor under the time-average equilibrium refueling. The results show that the coolant void reactivity of the assembly analyzed in this paper is lower than that of 37-element bundle cell with natural uranium and 37-element bundle cell with mixed TU fuel pins; that the max time-average channel/bundle power of the core meets the limits - less than 6700kW/860 kW; that the fuel conversion ratio is higher than that of the CANDU-6 reactor with natural uranium; and that the exit burnup increases to 13400 MWd/tU. Thus, the simulation in this paper with the fuel in the 37-element bundle cell using discrete TU fuel pins can be considered to be applied in CANDU-6 reactor with adequate modifications of the core structure and operating modes.

• 한국정밀공학회지
• /
• 제33권11호
• /
• pp.893-898
• /
• 2016

Plastic array lens are cheap to manufacture; however, plastic is not resistant to high temperatures and moisture. Optical glass represents a better solution but is a more-expensive alternative. Glass array lens can be produced using lithography or precision-molding techniques. The lithography process is commonly used, for instance, in the semiconductor industry; however, the manufacturing costs are high, the processing time is quite long, and spherical aberration is a problem. To obtain high-order aspherical shapes, mold-core manufacturing is conducted through ultra-precision grinding machining. In this paper, a $4{\times}1$ mold core was manufactured using an ultra-precision machine with a jig for the injection molding of an aspherical array lens. The machined mold core was measured using the Form TalySurf PGI 2+ contact-stylus profilometer. The measurement data of the mold core are suitable for the design criterion of below 0.5 um.