• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2004

Building stones are used mainly as a material for making decoration and sculpture, and consequently they must have predominant physical properties extensively. Among various physical properties, the coefficient of pore dominates the usefulness of building stones, so the plans were made for establishing the quality classification of building stones with respect to the nature of pore. For this study, bore-hole core samples according to the depth of the biotite granites and the granitic gneiss were applicated. From the related chart between porosity and absorption ratio, Mungyeong granitic gneiss($Gn_1$) shows the widest phase of distribution in the range of measurement values, and the values decrease in the order of Pocheon granite($Gr_2$) and Mungyeong granite($Gr_1$) in the range. The strength of each rock mass varies with the degree of alteration. Also in correlation between compressive strength and tensile strength, the range of measurement values decrease in the order of $Gn_1$, $Gr_2$and $Gr_1$. Porosity is adopted as a representative physical property for establishing the quality classification of building stones, and then relative evaluation was made with regard to various physical properties. From the related chart between porosity(n)-specific gravity(G), absorption ratio(Ab), compressive strength(${\sigma}_{c}$), tensile strength(${\sigma}_{t}$), shore hardness(Hs) and Young's modulus($E_{t}$), standard of each grade is established.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.92-106
• /
• 2006

The process of designing Cheonggyecheon Entrance Plaza began with researching four keywords: plaza, restoration. modernity and icon. The outcome of the research was reinterpreted into and informed the design. An urban plaza must not only be a stage for civic life but should also be a portrait of the city to which it belongs. Many Korean plazas, however, are treated as if they are parks. Yeouido Park, which was originally a vast urban void, and Seoul Plaza, recently paved with grass, are good example. The strong 'green myth' can hinder socio-political activities. Cheonggyecheon cannot be said to have been 'restored', since it is still disconnected from its origin and upper streams, and the water is circulated by electricity. So it is better understood as an artificial urban waterfront, rather than an ecologically restored stream. This fact might diminish its ecological value, but not its recreational one. The entrance plaza therefore should reflect that the new stream brings back an 'experience', not only water itself. At the same time, the catch phrase of this restoration project was 'post-modern'. The demolished Cheonggye Expressway represents the 'economy drive' of the 1970s, so the newly opened Cheonggyecheon serves as a perfect counterpart to it. But modernity in Korea is the spirit that made many of the good things, not only its shortcomings, we have now. And from the philosophy of this restoration project, we can see that it is still an ongoing attitude in a way. Remnant of Cheonggye Expressway can evoke our nostalgia for the era. There are plenty of symbols in Seoul, both as architecture and objects. But none of them provide citizens with experience, other than the experience of looking at them. Cheonggyecheon Entrance Plaza is a good place to serve as an icon for a dynamic Seoul. From the research, the designer concluded that this plaza should commemorate the incomparable horizontal experience of Cheonggyecheon and the old expressway, amid the vertical metropolis. The Pedestrian Sculpture, which people can stroll on and look out over Cheonggyecheon, is to be made of steel cladding with a core structure and represents the dynamism of the stream, Seoul and contemporary Korea. The choice of material and the steel structure are also ways of creating the icon. The Water Plaza, the space underneath the ramp, will accommodate people and their urban activities, providing an opportunity to play with water. The Waterblades will be a device for the dramatic beginning of the stream, simultaneously camouflaging ugly openings in the outlets. The Wall of Archaeology is to be made with pre-fab resin blocks, translucent enough so that people can see through any archaeological findings of the site. The strong water-resistant character of resin makes the wall steady throughout the flood season as well. Cheonggyecheon restoration project is an effort to combine contemporary urban demand with the once-existing physicality by evoking our nostalgia for it. The project itself shows many socio-political issues of present-day Korea. The entrance plaza design thus is focused on suggesting an icon for the metropolis, simultaneously celebrating the stream itself. Within this space, people will be exposed to a unique experience that any 'green myth' cannot offer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5933-5938
• /
• 2014

In this study, the effect of varying the mixture gas during FCA welding was studied for an Atos 60 test piece. To examine the characteristics of welding, the weldability of the material was checked before welding and online monitoring was performed to examine the mechanical properties after welding. The mixture Ar 80% + $CO_2$ 20% at low speed gave very elegant beads with very little spatter. 100% $CO_2$ gave rise to high spatter generation. For Ar 80% + $CO_2$ 20%, the low current region due to the normal short circuits created spatter, which was more than double for 100% $CO_2$. This peak distribution occurred due to the instability of the arc. The tensile test result for Ar 80% + $CO_2$ 20%, Ar 90%+ $CO_2$ 10% and $CO_2$ 100% at 511MPa, 507MPa, and 469MPa showed that the yield strength was improved by 8.1 and 8.9% for 80%+ $CO_2$ 20% and Ar 90%+ $CO_2$ 10%, respectively, compared to 100% $CO_2$. The tensile test result at 622MPa, 609MPa, and 581MPa showed that the yield strength was improved by 7.0% for both the mixture gas compared to 100% $CO_2$.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.3
• /
• pp.31-47
• /
• 2008

In this study the interpretive perspective means a point of view on educational curriculum in which in order to reach the understanding of the meaning of the behaviors and beliefs of human beings, and the historical and cultural products, the process of discussing on the basis of historical and cultural knowledge is very important. The developed curriculum means the one that consists of the goal of the curriculum, the contents of the curriculum, lesson plans, and the instruction-learning materials. This study has been carried out in four steps: conceptualization, development, application and evaluation. This study has tried to propose some changes in the contents of clothing life education on the basis of the interpretive perspective by firstly, assuming some core concepts that were related to clothing life education in Home Economics and secondly, organizing the contents of the clothing life culture area based upon historical and cultural materials. The results of the application of the developed curriculum came out positive. The strong points of the developed curriculum showed that for the students the curriculum was helpful in seeking answers to such questions as 'who I am' and 'what kind of being I am' through the perception of traditional culture and clothing life. In addition, the developed learning contents were recognized as new knowledge. It also showed that teaching contents with a focus on the interpretive perspective could play a role as reflection for the practice and for the arrival at the final perception. A weak point of the developed curriculum is that the Home Economics teachers themselves might find difficulty preparation for teaching this material because of their limited understanding and knowledge of the historical and cultural materials about clothing life.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• Economic and Environmental Geology
• /
• v.52 no.2
• /
• pp.189-197
• /
• 2019

HLW (High Level Radioactive Waste) is one of the problems that must be solved in the countries that implement nuclear power generation. Most countries that are concerned about HLW treatment are considering complete isolation from human society by disposing them deep underground. For perfect isolation, understanding the characteristics of underground rocks is very important. In particular, understanding the characteristics of discontinuity as a path way is one of the first things in order to predict the movement of exposed nuclear species to the surface. In this study, we used 500m underground core samples obtained from granite and gneiss area. The purpose of this study is to understand the characteristics of the discontinuities in each rock type and to analyze the properties of the joints in the underground relative to the surrounding environment. For this purpose, the types of discontinuities were classified and the distribution of each discontinuity were analyzed through visual analysis of the each sample obtained at 500m underground. This study can be used as a basic data for understanding the properties of discontinuities in the rock of the survey area and it can be also used as an important data for understanding the distribution characteristics of discontinuities according to the rock types.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Journal of Engineering Education Research
• /
• v.21 no.4
• /
• pp.53-62
• /
• 2018

The purpose of this study is to investigate the current conditions of the domestic and foreign curricula in the field of chemical engineering and to draw implications. The results of the study are as follows. Most of the domestic research universities (including non-certified universities) have curricula organized within the scope of the ABEEK certification, which is the minimum standard guide for chemical engineering curricula. However, we are concerned that chemical engineering education in some domestic universities may lack in education quality and program relevance. Graduates from these universities may not have equivalent qualifications as international graduates. It is considered that most of the 12 domestic universities organize their subjects according to the certificate of accreditation standard and to the traditional subjects of chemistry in the 'Department of Chemical Engineering' or 'Department of Chemical and Biological Engineering Chemical and Biological Engineering'. However, due to the increase in the number of overlapping subjects with other majors because of the movement towards academic diversity, the integrity of the chemical engineering curricula is at risk. In addition, after surveying the major and research areas of the department professors, it has been found that there is a shortage of professors who have majored in chemical engineering. Therefore, there is a concern that students may lack understanding of the core principles of chemical engineering. The results of the analysis of the curricula of overseas research universities (including non-certified universities) are as follows. Although the chemical engineering industry in developed countries like the United States and Europe is advancing and changing very quickly, the chemical engineering education in these countries is highly focused on traditional subjects and other related subjects in order to cultivate traditionally trained chemical engineers. The Department of Chemical Engineering at overseas universities still maintains the academic integrity of the chemical engineering field. This is a significant suggestion for our country. On the other hand, domestic universities are changing the name of their chemical engineering major, or even if the name is maintained, they are fusing their curriculum with other majors such as material engineering. Therefore, it is very necessary at this point to start a discussion regarding the integrity of the department of chemical engineering in Korea. We hope that the departments of chemical engineering in domestic universities maintain the integrity of traditional chemical engineering while operating the curriculum within the scope of the standards of the engineering education certification system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.553-558
• /
• 2019

Global auto parts companies are making efforts to develop EWP(: Electric Water Pump) which is one of the core parts of environment friendly car. In eco-friendly automobiles, an independent cooling system is used rather than a cooling system that is linked to an internal combustion engine. Therefore, the research and development of the water pump operating separately from the engine and the related production system are being actively carried out. In order to overcome the shortcoming of EWP of PPS material suitable for injection system, G company which is a global parts company that researches and develops EWP around SUS and is in the process of developing robot-based production equipment for mass production. In this paper, a heat shock simulation system is designed and implemented that works with the robot-based production system to test the performance of the produced EWP. By using this system, it is possible to test the EWP in an virtual environment similar to the actual environment, thereby reducing the defect rate of the product. At the same time, all the data produced during the entire process for testing can be stored, which can be utilized in the future development of CPS(: Cyber Physical System) of EWP system based on big data.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2019

Composite pile, which is composed of the steel pipe pile in which the large horizontal force acts and the PHC pile in which the small horizontal force acts by a special connecting devices, is being commercialized as a base material for civil engineering structures. The core of such a composite pile can be said to be a design criterion for estimating the joint position and stability of the connection device between steel pipe pile and PHC pile. In Korea, there is no precise specification for the location of composite pile joints. In the LH Design Department (Korea Land & Housing Corporation, 2009), "Application of composite pile design and review of design book marking" was made with reference to Road Design Practice Volume 3 (Korea Expressway Corporation, 2001). this is used as a basis of the design of the composite pile. It can not be regarded as a section change of the composite pile, so it has a limitation in application. Therefore, In this study, we propose a design criterion for the location of the section of the composite pile (joint of steel pipe pile and PHC pile) and evaluate the stability and economical efficiency of it by using experimental method and analytical method. Analysis of composite pile design data installed in 79 domestic bridges abutment showed that the stresses, bending moments, and displacements acting on the pile body and connection of the pile were analyzed. Through the redesign process, it was confirmed that the stresses generated in the connecting device occur within the allowable stress values of the connecting device and the PHC pile. In conclusion, the design proposal of composite pile joint location through empirical case study in this study is an improved design method considering both stability and economical efficiency in designing composite pile.