• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.940-945
• /
• 2016

In this paper, zero sequence equivalent circuit of Yg-Yg three phase core-type transformer is analyzed. Many problems by iron core structure of the three phase transformer due to asymmetric three phase lines, which includes line disconnection, ground fault, COS OFF, and unbalanced load are reported in the distribution system. To verify a feasibility of zero sequence impedance of Yg-Yg type three phase transformer, fault current generation in the three phase core and shell-type Yg-Yg transformer is compared by PSCAD/EMTDC when single line ground fault is occurred. As a result, shell-type transformer does not affect the flow of fault current, but core-type transformer generate an adverse effect by the zero sequence impedance. The adverse effect is explained by the zero sequence equivalent circuit of core-type transformer and Yg-Yg type three phase core-type transformer supplies a zero sequence fault current to the distribution system.

• Kyungpook Mathematical Journal
• /
• v.55 no.2
• /
• pp.355-372
• /
• 2015

In the present paper, by using the Fibonacci difference matrix, we introduce the almost convergent sequence space $\hat{c}^f$. Also, we show that the spaces $\hat{c}^f$and $\hat{c}$ are linearly isomorphic. Further, we determine the ${\beta}$-dual of the space $\hat{c}^f$ and characterize some matrix classses on this space. Finally, Fibonacci core of a complex-valued sequence has been introduced, and we prove some inclusion theorems related to this new type of core.

• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.80-84
• /
• 1991

We cloned and expressed hepatitis B viral core antigen (HBcAg) gene in E. coli using $P_{L}$ promoter system. For optimal expression of the gene, we undertook the studies on the effects of the distance between Shine-Dalgarno (SD) sequence and start codon, copy number of repressor gene, induction temperature, and the stability of the core antigen. The results demonstrated that the induction at 37.deg.C was more efficient than at 42.deg.C, and the 11 base pairs (bp) distance between SD sequence and start codon of HBcAg gene was more efficient than the 15 bp distance in E. coli. The copy number of cI857 repressor gene did not influence on the expression of HBcAg, and the expression level of HBcAg in mutant type (low protease activity) and wild type strains was almost the same. The produced core antigen appeared to be HBcAg not HBeAg judged by two different radioimmunoassat (RIA) kits. This result suggested that the antigen was stable in E. coli.i.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1104-1107
• /
• 2005

This paper presents a comparison of core losses for the four cases of Switched Reluctance Motors (SRM) with different winding method and switching sequence. With concentrated winding SRM, two kinds of switching sequence are considered for one-phase exciting and two-phase simultaneously exciting driving. With both distributed winding and toroidal winding, two-phase exciting driving is considered. The ratio of calculated core losses to input power is able to be used a guide or reference for deciding the winding method and switching sequence of in the initial design stage of SRM.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.313-326
• /
• 2017

The systematic management of plant risk is crucial for enhancing the safety of nuclear power plants and for designing new nuclear power plants. Accident sequence precursor (ASP) analysis may be able to provide risk significance of operational experience by using probabilistic risk assessment to evaluate an operational event quantitatively in terms of its impact on core damage. In this study, an ASP methodology for two operation mode, full power and low power/shutdown operation, has been developed and applied to significant accident precursors that may occur during the operation of nuclear power plants. Two operational events, loss of feedwater and steam generator tube rupture, are identified as ASPs. Therefore, the ASP methodology developed in this study may contribute to identifying plant risk significance as well as to enhancing the safety of nuclear power plants by applying this methodology systematically.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.6
• /
• pp.101-109
• /
• 2019

The purpose of this study is to improve a general Top-Down construction process for superstructure construction period reduction. In a general Top-Down construction sequence, the ground floor slab is set up first. Subsequently, 1st basement level construction including core walls is constructed. Initiation of the ground level superstructure gets waited until then. In this study, removable deck plate installation on the bottom of the core walls of ground level is preceding the concrete casting, therefore, ground level superstructure construction is able to get started earlier. Up to first typical floor concrete casting, total of seventy-two working(calendar) days will be resulted in a reduction from the total construction periods.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.4
• /
• pp.399-405
• /
• 1998

From the sequence alignment of various non-ribosomal peptide synthetases, several motifs of highly conserved sequences have been identified within each domain of peptide synthetases. We designed PCR primers based on the highly conserved nucleotide sequences to amplify and isolate a ∼7.2-kb DNA fragment of the Bacillus subtilis 713 which was isolated and reported to produce an antifungal peptide compound. Nucleotide sequence analysis of 4.8 kb of the predicted amino acids revealed significant homology to various peptide synthetases over the whole sequence and also revealed two amino acid-activating domains with highly conserved Core 1 to Core 6 and spacer motif. This suggests that the isolated DNA fragment is part of a peptide synthetase gene for antifungal peptide.

• Advances in concrete construction
• /
• v.4 no.3
• /
• pp.173-194
• /
• 2016

This paper consists in a study of a new contructive sequence of road viaducts with Movable Scaffolding System (MSS) using numerical tools based on finite element method (FEM). Traditional and new sequences are being used in Spain to build viaducts with MSS. The new sequence permits an easier construction of one span per week but implies some other issues related to the need of two prestressing stages per span. In order to improve the efficiency of the new sequence by reducing the number of prestressing stages per span, two solutions are suggested in this study. Results show that the best solution is to introduce the 100% of the prestressing force at the self-supporting core in order to improve the road viaduct construction with movable scaffolding system by reducing execution time without increasing economic costs.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.622-627
• /
• 2002

Diphtheria toxin repressor (DtxR) binds to approximately 30 to 35-bp regions containing an interrupted 9-bp inverted repeat within a 19-bp core sequence. The core sequence is fairly conserved and critical for DtxR binding. The flanking regions that are consisted of 5 to 8 more of nucleotides from the core are also required for DtxR binding. The nucleotides in both flanking regions are A-T rich. To examine whether the A-T nucleotides in both flanking regions from the core have significant roles for DtxR binding, a DNA fragment was constructed based on the diphtheria tox promoter/operator, and DNA fragments with substitution of A and T nucleotides In the flanking regions to G and C were also constructed. To assess the effect of these substitutions on binding of DtxR and repressibility by DtxR, $\beta$-galactosidase activity from lacZ fused to the region was assessed. Gel mobility shift of the region by purified DtxR was also examined. The DNA fragments containing the mutations in the flanking regions still exhibited repression and mobility shift with DtxR. The core segment with the mutation is still, therefore, recognized by DtxR. Nonetheless, the results from the assays indicated that the substitution significantly decreased repression of the operator by DtxR in vivo under high-iron condition and decreased binding of DtxR to the operator. These results suggest that A and T nucleotides fur both flanking regions are preferred for the binding of DtxR.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.199-230
• /
• 1994

The blanking sequence of refrigerator and air-conditioner compressor-motor-core has been determined by trial and error. To improve such problem, 2d-analysis using ANSYS to verify the deformation state has been done firstly. And 3d-analysis following up the real process has been done. Additionally, verified the 3-d analysis result using S/W LS-DYNA.