• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.3
• /
• pp.31-40
• /
• 2000

A robust scheme of locating and counting the number of vehicles m urban traffic scenes, a core component of vision-based traffic monitoring systems, is presented The method is based on the evidential reasoning, where vehicle evidences m the background subtraction Image are obtained by a new locally optimum thresholding, and the evidences are merged by three heuristic rules using the geometric constraints The locally optimum thresholding guarantees the separation of bright and dark evidences of vehicles even when the vehicles are overlapped or when the vehicles have similar color to the background Experimental results on diverse traffic scenes show that the detection performance is very robust to the operating conditions such as the camera location and the weather The method may be applied even when vehicle movement is not observed since a static Image IS processed without the use of frame difference.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.34-42
• /
• 2009

HAO is a ORB engine to support the logic-based CORBA component developments in FPGA. In this papers, in order to give the interoperability between general CORBA and HAO, we propose newly the specialization of GIOP(General Inter-ORB Protocol) from consideration of FPGA. It compose of the two major capability. First, it can abstract the hardware structure from the various system board environments. Secondly, also it is possible to minimize the monopoly occupation for shared resource such as system bus, external memory.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.249-251
• /
• 2008

We investigated a flux-coupling type superconducting fault current(SFCL) limiter. The SFCL consisted of the primary and secondary coils, which were wound in series each other through an iron core. Superconducting unit was connected with secondary coil in parallel. The flux generated from a coil in normal operation is cancelled out by its structure and the zero resistance of the superconducting unit. In this paper. In order to compare the current limiting effects of the SFCL by applied voltage. When a lied voltage was increased, quench time was shortened Fast quench time is important component under the same fault condition because power burden of the SFCL is reduced by that of the superconducting units. The current limiting behavior of flux-coupling type SFCL was dependent upon the applied voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.3069-3078
• /
• 2014

This research handles the performance improvement effect by the Modeling & Simulation and shows the design, implementation, test results of the new 3-axis magnetometer which is the core component of strategic offensive deploying mine. The submarine is modelled by using the commercial electromagnetic field analysis tool on numerical value, and its magnetic field characteristic is predicted in order to apply the new magnetometer to the future underwater weapon system. The method to take the performance test results of new 3-axis magnetometer in the land is shown instead of the real test result in sea by making the miniature submarine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.295-295
• /
• 2008

This study introduced waste water treatment method applied superconductor HGMS(High Gradient Magnetic Separation). HGMS method treat high efficient method for various waste water. we have surveyed superconducting magnetic separation technology and reviewed the status of related industries using applied superconductivity. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel mesh, which is a core component in the magnetic separation system. In our basic preliminary experiment using HGMS, it was made clear that the fine para-magnetic particles in the rolling colling wasted water obtained from rolling process of POSCO can be separated with high efficiency.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.4
• /
• pp.179-188
• /
• 2003

Percentage differential characteristic scheme has been recognized as the principal basis for large transformer protection. Nowadays, relaying signals can contain second harmonic component to a large extent even in a normal state, and second harmonic ratio indicates a tendency of relative reduction because of the advancement of transformer's core material. And then, conventional second harmonic restraint differential relaying exposes some doubt in reliability. It is, therefore, necessary to develop a new algorithm for the effective and accurate discrimination. This paper deals with advanced fuzzy logic based relaying by using flux differential, and a new fault detection criterion logic scheme by using wavelet transform. To comparative analysis of proposed techniques, the paper constructs power system model including power transformer, utilizing the EMTP, and collects data through simulation of various internal faults and magnetizing inrush. The proposed fuzzy relaying and a new fault detection scheme were tested. The former, fuzzy relaying, was proven to be faster and more reliable than the latter.

• International Journal of High-Rise Buildings
• /
• v.1 no.4
• /
• pp.271-281
• /
• 2012

Tianjin Goldin Finance 117 tower has an architectural height of 597 m, total of 117 stories, and the coronation of having the highest structural roof of all the buildings under construction in China. Structural height-width ratio is approximately 9.5, exceeding the existing regulation code significantly. In order to satisfy earthquake and wind-resisting requirements, a structure consisting of a perimeter frame composed of mega composite columns, mega braces and transfer trusses and reinforced concrete core containing composite steel plate wall is adopted. Complemented by some of the new requirements from the latest Chinese building seismic design codes, design of the super high-rise building in high-intensity seismic area exhibits a number of new features and solutions to professional requirements in response spectrum selection, overall stiffness control, material and component type selection, seismic performance based design, mega-column design, anti-collapse and stability analysis as well as elastic-plastic time-history analysis. Furthermore, under the prerequisite of economic viability and a series of technical requirements prescribed by the expert review panel for high-rise buildings exceeding code limits, the design manages to overcome various structural challenges and realizes the intentions of the architect and the client.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.452-466
• /
• 2004

As the number of broadcasting channels and programs increases rapidly, the importance of personalized service has been emphasized. In this paper, we propose a practical framework of metadata broadcasting to provide personalized service according to user preferences and various terminal/network conditions. First, we present an overall system architecture of a metadata broadcasting system and then propose several core technologies (particularly in the parts of metadata authoring, metadata encoding, and metadata-based personalized content consumption). For interoperability, the proposed solution is designed to be compliant with the relevant standards of the TV-Anytime Forum, MPEG-7 Systems, and MPEG-2 Systems. Considering a home network environment, we also propose a metadata-based content adaptation scheme. Each component technology has been implemented individually, integrated into an end-to-end prototype broadcasting system, and successfully tested with a set of personalized service scenarios that are also developed in this study.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.157-165
• /
• 2017

The high-pressure resin transfer molding (HP-RTM) technology has been commercialized for fast production of fiber reinforced composite materials. The high-pressure mixing head was one of the most core component of the HP-RTM process. In this study, a mixing head was systematically designed, manufactured and evaluated. This mixing head was composed of a nozzle, a mixing chamber, a cleaning piston part, and an internal mold release part. In actual, a straight-type structure was newly designed instead of the conventional L-type structure for improving the maximum mixing pressure and mixing ratio precision. The performance of mixing head was showed maximum mixing pressure of 15.22MPa and mixing ratio precision of 0.12%. CFRP molding experiments were successfully obtained a 6~11 laminating carbon sheet using HP-RTM presses and specimen molds.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.5
• /
• pp.359-366
• /
• 2008

A two-dimensional thermal model of proton exchange membrane fuel cell with large active area is developed to investigate the performance of fuel cell with large active area over various thermal management conditions. The core sub-models of the two-dimensional thermal model are one-dimensional agglomerate structure electrochemical reaction model, one-dimensional water transport model, and a two-dimensional heat transfer model. Prior to carrying out the simulation, this study is contributed to set up the operating temperature of the fuel cell with large active area which is a maximum temperature inside the fuel cell considering durability of membrane electrolyte. The simulation results show that the operating temperature of the fuel cell and temperature distribution inside the fuel cell can affect significantly the total net power at extreme conditions. Results also show that the parasitic losses of balance of plant component should be precisely controlled to produce the maximum system power with minimum parasitic loss of thermal management system.