• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.842-844
• /
• 2004

Ternary tellurite glassy systems $(CuO-V_2O_5-TeO_2)$ have been synthesised using tellurium oxide as a network former and copper oxide as network modifier. The addition of a transition-matal oxide makes them electric or mixed electric-ionic conductors, which are of potential interest as cathode materials for solid-state batteries. This glass-ceramics crystallized from the $CuO-V_2O_5-TeO_2$ system are particularly interesting, because they exhibit high conductivity ( up to $6.03{\times}10^{-3}S/cm$) at room temperature. the glass samples were prepared by quenching the melt on the copper plate and the glass-ceramics were heat-treated at crystallizing temperature determined from differential thermal analysis (DTA). The electric D.C conductivity result have been analyzed in terms of a small polaron-hopping model.

• Membrane and Water Treatment
• /
• 제13권3호
• /
• pp.121-128
• /
• 2022

A tremendous amount of energy resources is being wasted in cleaning wastewater to save the environment across the globe. Several different procedures are commercially available to process wastewater. In this work, membrane filtration technique is used to treat the textile wastewater because of its cost effectiveness and low environmental impacts. Mixed Matrix Membrane (MMM) consist of Polyvinyl Alcohol (PVA) in which Graphene Oxide (GO) was added as a filler material. Five different membranes by varying the quantity of GO were prepared. The prepared membrane has been characterized by Scanning Electron Microscopy (SEM), X-Ray Diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR) and Water Contact Angle (WCA). The prepared membranes have been utilized to treat textile wastewater. The synthesized membranes are used for the elimination of total dissolve solids (TDS), total suspended solids (TSS), Methylene blue (MB) dye and copper metallic ions from textile wastewater. It is concluded that amount of GO has direct correlation with the quality of wastewater treatment. The maximum removal of TDS, TSS, MB and copper ions are found to be 7.42, 23.73, 50.53 and 64.5% respectively and are achieved by 0.02 wt% PVA-GO membrane.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.885-889
• /
• 2012

본 연구에서는 활성탄소의 이산화탄소 흡착 능력을 향상시키기 위한 아민과 금속산화물 첨가제에 관하여 고찰하였다. 표면 처리한 활성탄소의 물리화학적 특성은 X-ray photoelection specstroscopy (XPS), 질소등온흡착곡선, X-ray diffraction (XRD), BET 장치를 이용하여 분석하였다. 실험결과, 활성탄소 표면의 아민 기능기는 산성가스인 이산화탄소를 선택적으로 흡착하기 위한 염기성 자리로 작용하며, 2차아민을 갖는 기능기가 1차아민에 비하여 이산화탄소흡착능력이 우수함을 확인하였다. 활성탄소에 첨가된 금속산화물은 표면에서 전자 도우너(electron donor) 역할을 하며 알칼리 특성을 지니고, 아민 기능기와 유사하게 이산화탄소 가스와 산-염기 반응을 유도한다. 금속산화물 표면처리를 했을 경우 순수한 활성탄소와 비교하여 이산화탄소 흡착 용량이 85% 증가하였으며, 이러한 결과로 미루어 볼 때 금속산화물 첨가제는 활성탄소의 이산화탄소 흡착능력을 향상시키기 위한 목적으로 아민 첨가제와 병행하거나 대체할 수 있는 물질로 기대된다.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.37-42
• /
• 2019

This study investigates Ag coated $Cu_2O$ nanoparticles that are produced with a changing molar ratio of Ag and $Cu_2O$. The results of XRD analysis reveal that each nanoparticle has a diffraction pattern peculiar to Ag and $Cu_2O$ determination, and SEM image analysis confirms that Ag is partially coated on the surface of $Cu_2O$ nanoparticles. The conductive paste with Ag coated $Cu_2O$ nanoparticles approaches the specific resistance of $6.4{\Omega}{\cdot}cm$ for silver paste(SP) as $(Ag)/(Cu_2O)$ the molar ratio increases. The paste(containing 70 % content and average a 100 nm particle size for the silver nanoparticles) for commercial use for mounting with a fine line width of $100{\mu}m$ or less has a surface resistance of 5 to $20{\mu}{\Omega}{\cdot}cm$, while in this research an Ag coated $Cu_2O$ paste has a larger surface resistance, which is disadvantageous. Its performance deteriorates as a material required for application of a fine line width electrode for a touch panel. A touch panel module that utilizes a nano imprinting technique of $10{\mu}m$ or less is expected to be used as an electrode material for electric and electronic parts where large precision(mounting with fine line width) is not required.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.206-212
• /
• 1997

차세대 반도체 소자의 배선재료로 사용될 것으로 예상되는 구리의 reflow 특성을 조 사하였다. 구리박막을 hole 및 trench 패턴 위에 금속유기화학증착법으로 증착하고 $350^{\circ}C$에 서 $550^{\circ}C$까지의 열처리 온도 범위 및 질소, 산소 분위기에서 열처리하였다. 질소 분위기에서 열처리 한 경우에는 구리가 패턴을 채우지 못하였고 열처리 온도 $450^{\circ}C$ 이상의 산소 분위기 에서 열처리 한 경우에는 reflow에 의하여 구리가 패턴을 채웠다. 이러한 현상은 구리의 산 화시 발생되는 열에 의하여 부분적으로 액상화된 구리가 표면에너지 및 위치에너지를 감소 시키기 위하여 패턴을 채우면서 발생하는 것으로 생각된다. 산소 분위기에서 열처리한 경우 에는 응집물 표면에 300$\AA$이하의 구리 산화물이 형성되었으며 열처리 온도 $550^{\circ}C$에서 구리 의 응집에 의하여 비저항이 급격하게 증가하였다.

• 공업화학
• /
• 제33권6호
• /
• pp.630-635
• /
• 2022

멜라민 스펀지를 열처리하여 제조된 질소함유 탄소 스펀지에 산화구리(CuO)를 무전해 도금하여 기판없이 작동하는 일산화질소(NO) 가스 센서를 제조하였다. 탄소 스펀지 표면의 CuO 함량은 도금 시간이 증가함에 따라 증가하였으나, NO 가스 흡착을 유도한다고 알려져 있는 질소의 함량은 CuO 표면 함량이 증가함에 따라 감소하였다. 미처리 탄소스펀지는 NO 가스에 대하여 18 min에 최대 저항 변화(5.0%)를 나타내었다. 반면에, CuO가 도금된 샘플(CuO30s-CS)은 8 min만에 최대 18.3%의 저항변화를 보였다. 이러한 NO 가스 감지 능력 향상은 CuO로 인하여 탄소 스펀지의 정공 캐리어 수 증가 및 전자전달 촉진에 기인하는 것으로 판단된다. 그러나, 60 s 동안 CuO 무전해 도금된 탄소 스펀지의 NO가스 감지 저항은 1.9%로 오히려 감소하였다. 이는 탄소 스펀지 표면에 CuO로 완전히 도금되어 NO 가스 흡착 능력이 떨어져 저항변화가 감소한 것으로 판단된다. 따라서, CuO가 도금된 탄소 스펀지는 빠르고 우수한 저항변화 특성을 가지고 있어 유용한 NO 가스 센서로 사용할 수 있으나, CuO가 탄소 스펀지 표면을 완전히 도금해서는 안 된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.52.1-52.1
• /
• 2009

Cupric oxide (CuO) is a p-type semiconductor with band gap of ~1.7 eV and reported to be suitable for catalysis, lithium-copper oxide electrochemical cells, and gas sensors applications. The nanoparticles, plates and nanowires of CuO were found sensing to NO2, H2S and CO. In this work, we report about the comparison about hydrogen sensing of nano thin film and nanowires structured CuO deposited on single-walled carbon nanotubes (SWNTs). The thin film and nanowires are synthesized by deposition of Cu on different substrate followed by oxidation process. Nano thin films of CuO are deposited on thermally oxidized silicon substrate, whereas nanowires are synthesized by using a porous thin film of SWNTs as substrate. The hydrogen sensing properties of synthesized materials are investigated. The results showed that nanowires cupric oxide deposited on SWNTs showed higher sensitivity to hydrogen than those of nano thin film CuO did.

• 한국재료학회지
• /
• 제15권1호
• /
• pp.6-13
• /
• 2005

Copper based leadframe sheets were immersed in two kinds of hot alkaline solutions to form brown-oxide or blackoxide layer on the surface. The oxide-coated leadframe sheets were molded with epoxy molding compound (EMC). After post mold curing, the oxide-coated EMC-leadframe joints were machined to form sandwiched double-cantilever beam (SDCB) specimens. The SDCB specimens were used to measure the fracture toughness of the EMC/leadframe interfaces under quasi-Mode I loading conditions. After fracture toughness testing, the fracture surface were analyzed by various equipment to investigate failure path. An adhesion model was suggested to explain the failure path formation. The adhesion model is based on the strengthening mechanism of fiber-reinforced composite. The present paper deals with the introduction of the adhesion model. The explanation of the failure path with the proposed adhesion model was introduced in the companion paper.

• 전기화학회지
• /
• 제3권4호
• /
• pp.219-223
• /
• 2000

구리-바나듐 산화물 양극을 이용하여 $(Cu_{0.5}V_2O_5)$으로 구성된 전 고상의 리튬이차박막전지를 제작하였다. 구리-바나듐 산화물 박막은 reactive DC magnetron sputtering을 이용하여 co-sputtering에 의해 제조하였고 Lipon고체전해질은 순수한 질소 분위기 하에서 RF 스퍼터링으로 제조하였다. XRD분석을 통해 구리-바나듐 산화물 박막이 비정질임을 확인하였고, EC:DMC(1:1 in IM $LiPF_5$)액체전해질을 사용한 반전지 구조에서 그 전기화학적 특성을 고찰하였다. Lipon고체전해질의 이온전도도는 $25^{\circ}C$에서 $1.02\times10^{-6}S/cm$를 나타내었고 전고상 박막전지는 $1.5V\~3.6V$의 전압구간, $50{\mu}A/cm^2$의 전류밀도에서 500싸이클까지 약 $50{\mu}Ah/cm^2{\mu}m$의 방전용량을 유지하였다

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.15-19
• /
• 2017

The fossil fuel power consumption generates $CO_2$, which causes the problems such as global warming. Also, the increase in energy consumption has accelerated the depletion of the fossil fuels, and renewable energy is attracting attention. Among the renewable energies, the solar energy gets a lot of attention as the infinite clean energy source. But, the supply level of solar cell is insignificant due to high cost of generation of electric power in comparison with fossil fuels. Thus several researchers are recently doing the research on ultra-low-cost solar cells. Also, $Cu_2O$ is one of the applied materials as an absorption layer in ultra-low-cost solar cells. Cuprous oxide ($Cu_2O$) is highly desirable semiconductor oxide for use in solar energy conversion due to its direct band gap ($E_g={\sim}2.1eV$) and a high absorption coefficient that absorbs visible light of wavelengths up to 650 nm. In addition, $Cu_2O$ has several advantages such as non-toxicity, low cost and can be prepared with simple and cheap methods on large scale. In this work, we fabricated the $Cu_2O$ thin films by reactive sputtering method. The films were deposited with a Cu target with variable parameters such as substrate temperature, rf-power, and annealing condition. Finally, we confirmed the structural properties of thin films by XRD and SEM.