• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.25.2-25.2
• /
• 2007

• 한국재료학회지
• /
• 제26권4호
• /
• pp.216-221
• /
• 2016

A sintering process for copper based films using a rapid thermal process with infrared lamps is proposed to improve the electrical properties. Compared with films produced by conventional thermal sintering, the microstructure of the copper based films contained fewer internal and interfacial pores and larger grains after the rapid thermal process. This high-density microstructure is due to the high heating rate, which causes the abrupt decomposition of the organic shell at higher temperatures than is the case for the low heating rate; the high heating rate also induces densification of the copper based films. In order to confirm the effect of the rapid thermal process on copper nanoink, copper based films were prepared under varying of conditions such as the sintering temperature, time, and heating rate. As a result, the resistivity of the copper based films showed no significant changes at high temperature ($300^{\circ}C$) according to the sintering conditions. On the other hand, at low temperatures, the resistivity of the copper based films depended on the heating rate of the rapid thermal process.

• 한국입자에어로졸학회지
• /
• 제8권1호
• /
• pp.37-43
• /
• 2012

In this study, we designed a 'spark in liquid' system. The spark discharge between two electrodes were used to generate particles by using sufficient temperature to evaporate a part of electrodes. The power supply system provides a continuous spark discharge by discharging of the capacitor to ionize the electrodes in liquid. The DC spark discharge system operates with 1-10 kV voltage. Processed copper and graphite rods were used to both electrodes with 1-3 mm diameter. There are several variables which can control the particle size and concentration such as gap distance between electrodes, applied voltage, operating liquid temperature, electrode type and liquid type. So we controlled these variables to confirm the change of particle size distribution and concentration of particles contained in liquid as wt%. 'spark in liquid' system is expected to apply nanoink by control of concentration with analysis of characteristics.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.43-49
• /
• 2010

직접인쇄기술 방식은 기존의 포토리소그래피 방법을 이용한 패터닝 기술에 비해 저비용, 간단한 공정 과정, 친환경성 등 여러 장점들로 인해 미세 회로 형성 분야의 그린 테크놀로지로 최근 각광받고 있다. 이러한 프린팅 기반의 전자기술을 상용화하기 위해서는 프린팅 방식으로 형성된 회로의 전기적 특성 평가가 필수적인데, 이에 본 연구에서는 구리 잉크를 이용하여 잉크젯 프린팅 방식으로 2 가지 타입, parallel transmission line(PTL)과 coplanar waveguide(CPW) 구조의 회로를 형성하고 $250^{\circ}C$에서 30분 동안 소결하여 완성하였다. 전류-전압 그래프로 직류 저항을 측정하여 벌크 구리의 비저항 값의 약 3.3배되는 평균 0.558 ${\mu}{\Omega}{\cdot}cm$의 비저항 값을 도출하였고 회로의 고주파 특성 평가를 위해 주파수 범위 0~30 GHz에서 probe station chuck과 샘플 간의 갭 유무에 따른 scattering parameter를 측정하였다. 모든 시편에서 5 dB 이하의 반사 특성을 보였으며, PTL 회로가 CPW 구조보다 전반적으로 더 좋은 통과 특성을 나타내었다.