• Fibers and Polymers
• /
• v.3 no.4
• /
• pp.147-152
• /
• 2002

Copper (II) salts are used as metallizing agents in the synthesis of new non-genotoxic direct dyes for cotton. Specifically, cotton fabric is dyed with non-genotoxic disazo direct dyes and then treated with copper salts. The complexes are characterized by neutron activation analysis, absorption spectrometry and standard Salmonella mammalian mutagenicity assay, and the after-treated fabrics are evaluated for lightfastness and washfastness. Direct dyes possessing ortho-propoxy and ortho'-hydroxy substituted systems formed the corresponding nonmutagenic 1:2 dye:metal complex and undergo significant improvement in lightfastness following metallization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1992.07a
• /
• pp.325-328
• /
• 1992

The purpose of this research is to develop the technique of heavy metal removal from wastewater. The research is divided into two parts, one part uses complex precipitation and the other uses adsorption. In the first part of the study, humic acid is used as the complex agent, humic acid is a polyelectrolyte with a high complexation affinity. Lead, copper, zinc and cadmium were studied for their complex precipitation efficiencies. In the batch studies, humic acid was effective in removing 100% of the lead and 48.2% of the copper respectively from wastewater without anytreatment. The efficiency of cadmium and zinc, however, was very low. In the second part of the study, wastewater is introduced at the top of a silicagel adsorption column and then bottom effluent concentration is analyzed. The results of the analysis are used to draw a breakthrough curve.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.715-720
• /
• 2014

A Cu(II) complex with an three nitrogens and one sulfur coordination environment was synthesized and characterized. Its redox potential was observed at 0.483 V vs. NHE, very similar to that of a Cu-containing fungal enzyme, galactose oxidase, which catalyzes the oxidation of alcohols to corresponding aldehydes with the concomitant reduction of molecular oxygen to water. The Cu(II) complex selectively oxidizes the benzylic alcohols using TEMPO/$O_2$ under mild reaction conditions to corresponding aldehydes without forming any over-oxidation product. Moreover, the catalyst can be recovered and reused multiple times for further oxidation reactions, thus minimizing the waste generation.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.147-150
• /
• 2000

The complex [CuL}Cl₂·3H₂O(1)(L=2,13-bis(2-hydroxyethyl)-5,16-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0/sup 1.18/,0/sup 7.12/] docosane) has been synthesized and characterized by X-ray crystallography. 1. crystallized in the monoclinic, space group C2/c, with a=21.647(6)Å, b=8.549(1)Å, c=18.132(5)Å, β=118.58(2)°, V=2946.8(12)ų, Z=4, R₁(wR₂) for 2374observed reflections of [I>2σ(I)] was 0.052(0.187). The centrosymmetric complex 1 has an axially elongated octahedral geometry with four secondary and tertially amines of the macrocycle and tow oxygen atoms of the pendant hydroxyethyl groups.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2517-2522
• /
• 2012

New polynuclear poly(hexaaza macrocyclic) copper(II) complexes $[1](ClO_4)_{2n}{\cdot}(H_2O)_{2n}$, $[2](ClO_4)_{2n}{\cdot}(H_2O)_{2n}$, and $[3](ClO_4)_{2n}{\cdot}(H_2O)_{2n}$ have been prepared by the one-pot reaction of formaldehyde with ethylenediamine and 1,2-bis(2-aminoethoxy)ethane, 1,3-diaminopropane, or 1,6-diaminohexane in the presence of the metal ion. The polymer complexes contain fully saturated 14-membered hexaaza macrocyclic units (1,3,6,8,10,13-hexaazacyclotetradecane) that are linked by $N-(CH_2)_2-O-(CH_2)_2-O-(CH_2)_2-N$, $N-(CH_2)_3-N$, or $N-(CH_2)_6-N$ chains. The mononuclear complex $[Cu(H_2L^5)](ClO_4)_4$ ($H_2L^5$ = a protonated form of $L^5$) bearing two $N-(CH_2)_2-O-(CH_2)_2-O-(CH_2)_2-NH_2$ pendant arms has also been prepared by the metal-directed reaction of ethylenediamine, 1,2-bis(2-aminoethoxy)ethane, and formaldehyde. The polymer complexes were characterized employing elemental analyses, FT-IR and electronic absorption spectra, molar conductance, X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron micrograph (SEM). Electronic absorption spectra of the complexes show that each macrocyclic unit of them has square-planar coordination geometry with a 5-6-5-6 chelate ring sequence. The polymer complexes as well as $[Cu(H_2L^5)]^{4+}$ are quite stable even in concentrated $HClO_4$ solutions. Synthesis and characterization of the polynuclear and mononuclear copper(II) complexes are reported.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1988-1992
• /
• 2010

4-Amino-1,2,4-triazole copper complex (4-ATzCu) was synthesized, and its thermal behaviors, nonisothermal decomposition reaction kinetics were studied by DSC and TG-DTG techniques. The thermal decomposition reaction kinetic equation was obtained as: $d\alpha$ / dt =$10^{22.01}$ (1-$\alpha$)[-ln(1-$\alpha$)]$^{1/3}$ exp($-2.75\times10^4$ /T). The standard mole specific heat capacity of the complex was determined and the standard molar heat capacity is 305.66 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ at 298.15 K. The entropy of activation $({\Delta}S^{\neq})$, enthalpy of activation $({\Delta}H^{\neq})$, and Gibbs free energy of activation $({\Delta}G^{\neq})$ are calculated as 171.88 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ 225.81 $kJ{\cdot}mol^{-1}$ and 141.18 $kJ{\cdot}mol^{-1}$, and the adiabatic time-to-explosion of the complex was obtained as 389.20 s.

• Korean Journal of Microbiology
• /
• v.49 no.4
• /
• pp.313-320
• /
• 2013

Biofilm formed on stainless and copper in water treatment plant was investigated for sixteen weeks. Biofilm reactor was specially designed for this study. It was similar to that of a real distribution pipe. Raw water, coagulated, settled, filtered and treated water were used in this study. The average number of heterotrophic bacteria counts was $1.6{\times}10^4CFU/ml$, $5.8{\times}10^3CFU/ml$, $1.8{\times}10^3CFU/ml$, $1.3{\times}10^2CFU/ml$, 1 CFU/ml, respectively. Density of biofilm bacteria formed on stainless and copper pipes in raw, coagulated and settled water increased above $2.9{\times}10^3CFU/cm^2$ within second weeks while more biofilm bacteria counts were found on the stainless pipe than on the copper pipe. In case of filtered water (free residue chlorine 0.44 mg/L), there was no significant difference in the number of biofilm bacteria on both pipes and biofilm bacteria below $18CFU/cm^2$ were detected on both pipe materials after fifth weeks. Biofilm bacteria were not detected on both pipe materials in treated water (free residue chlorine 0.88 mg/L). According to the results of DGGE analysis, Sphingomonadacae was a dominant species of biofilm bacteria formed on the stainless pipe while the copper pipe had Bradyrhizobiaceae and Sphingomonadaceae as dominant bands. In case of filtered water, a few bands (similar to Propionibacterium sp., Sphingomonas sp., Escherichia sp., and etc.) that have 16S rRNA sequences were detected in biofilm bacteria formed on both pipes after fifth weeks. Stainless pipe had higher species richness and diversity than the copper pipe.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1055-1060
• /
• 2003

Adsorption on goethite of individual component from a solution containing phosphate, sulfate, or copper ion was investigated. Competitive adsorption in the binary and ternary solution systems composed of phosphate, sulfate, and copper ions was also investigated. In competitive adsorption systems with phosphate and sulfate ions, the presence of phosphate ion reduced the adsorption of sulfate ion largely. On the other hand, the presence of sulfate ion caused only a small decrease in phosphate adsorption. This result suggests that phosphate ion is a stronger competitor for adsorption on goethite than sulfate ion, which is consistent with the higher affinity of phosphate for the surface compared to sulfate ion. Compared to the results from single-sorbate systems, adsorption of copper ion in the binary system of sulfate ion and copper ion was found to be enhanced in the presence of sulfate ion. Addition of sulfate ion to the binary system of copper ion and phosphate ion resulted in a small enhancement in copper sorption. This result implies that the presence of sulfate ion promotes adsorption of the ternary complex FeOHCuSO$_4$. The adsorption isotherms could be well described by the Langmuir adsorption equation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.272-277
• /
• 2004

The primary aim of this study is to investigate new semi-abrasive free slurry including acid colloidal silica and hydrogen peroxide for copper chemical-mechanical planarization (CMP). In general, slurry for copper CMP consists of colloidal silica as an abrasive, organic acid as a complex-forming agent, hydrogen peroxide as an oxidizing agent, a film forming agent, a pH control agent and several additives. We developed new semi-abrasive free slurry (SAFS) including below 0.5％ acid colloidal silica. We evaluated additives as stabilizers for hydrogen peroxide as well as accelerators in tantalum nitride CMP process. We also estimated dispersion stability and Zeta potential of the acid colloidal silica with additives. The extent of enhancement in tantalum nitride CMP was verified through anelectrochemical test. This approach may be useful for the application of single and first step copper CMP slurry with one package system.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1767-1770
• /
• 2003

A simple, rapid and sensitive spectrophotometric method is herewith proposed for the determination of copper(II) by using diamine-dioxime ligand, meso-3,6,6,9-tetramethyl-4,8-diazaundecane-2,10-dione dioxime or meso-HexaMethyl Propylene Amine Oxime (meso-HMPAO). This method is based on the formation of a stable 1 : 1 red-pink complex between copper(II) and meso-HMPAO in aqueous solution. Absorption measurements were carried at 497 nm, with a molar absorptivity value of 338 L $mol^{-1}\;cm^{-1}$. Beer's law was obeyed over the concentration range of 0.5-370 ${\mu}$g $mL^{-1}$ with a Sandell's sensitivity value of 0.18 ${\mu}$g $cm^{-2}$. The proposed method has been successfully applied for determination of copper(II) in foodstuffs and pharmaceutical samples. The results obtained from this method are comparable with those obtained AAS.