• 자원리싸이클링
• /
• 제17권1호
• /
• pp.51-58
• /
• 2008

Cu-Ni-Co-Fe 함금상에 황의 원료로서 pyrite 또는 chalcopyrite를 첨가하여 매트상을 제조하는 방법에 대하여 검토하였다. 두 매트상 모두 주성분은 $(FeSi)_9S_8$, $CuFeS_2$, FeS, $Co_4S_3$, $Ni_3S_2$ 그리고 $Cu_2S$의 금속황화물 이었으며, chalcopyrite를 첨가한 매트의 경우 구리의 함량이 높아 $Cu_2S$의 피크가 더 높게 나타났다. 제조한 매트상의 침출 결과 모두 구리는 95%이상, 니켈과 코발트는 90% 이상의 침출율을 보였다. Pyrite와 chalcopyrite 첨가량이 증가할수록 침출액의 pH는 낮아지고, 용해되어 있는 철이온의 농도와 잔사량은 증가하였다. 한편 매트 중 황의 함량변화에 따른 유가금속의 침출율은 모든 시료에 대해 크게 변하지 않았으며, 다만 pyrite를 이용하여 제조한 매트의 경우에 Ni과 Co가 황 함량 증가에 따라 다소 증가하는 경향을 나타내었다.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.624-633
• /
• 2002

In order to improve the hydrogen storage capacity and the activation properties of the hydrogen storage alloys, the rare-earth metal alloy series, MmN $i_{4.5}$M $n_{0.5}$Z $r_{x}$(x=0, 0.025, 0.05, 0.1), are prepared by adding excess Zr in MmN $i_{4.5}$M $n_{0.5}$ alloy. The various parts in hydrogen storage vessel consisted of copper pipes reached the setting temperature within 4~5 minutes after heat addition, which indicated that storage vessel had a good heat conductivity required in application. The performance test on storage vessel filled with rare-earth metal alloys of 1000 gr was also conducted after hydrogen charging for 10 min at $18^{\circ}C$ under 10 atm. It showed that the average capacity of discharged hydrogen volume was found to be for $MmNi_{4.5}$ $Mn_{0.5}$ and $MmNi_{4.5}$ $Mn_{x}$ 0.5/$Zr_{samples}$ indicated that the released amount of hydrogen for this $AB_{5}$ type alloys was more than 92 % of theoretic value, and also it was found that the optimum discharging temperature for obtaining an appropriate pressure of 3 atm was determined to be $V^{\circ}C$ for $MmNi_{4.5}$ $Mn_{0.5}$$Zr_{x}$(x=0, 0.025, 0.05, 0.1) hydrogen storage alloys. The released amount of these hydrogen storage samples was 125 $\ell$ , 122.4 $\ell$ and 108.15 $\ell$/kg for $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{0.025}$ $MmNi_{4.5}$M $n_{0.5}$Z $r_{0.05}$, and MmN $i_{4.5}$ Mn_0.5$Zr_{0}$, at $70^{\circ}C$ respectively. Amount of the 2nd phases increase with increase on Zr contents in $MmNi_{4.5}$$Mn_{0.5}$ $Zr_{ 0.1}$/ alloy. This phenomenon indicates that$ ZrNi_3$ in $MmNi_{4.5}$ $Mn_{0.5}$ $Zr_{x}$ / phase, which shows the maximum storage capacity and the strong resistance to intrinsic degradation, is considered as a proper alloy for hydrogen storage. As the Zr contents increase, the activation time and the plateau pressure decreases and sloping of the plateau pressure increases.creases.eases.s.

• 박물관보존과학
• /
• 제16권
• /
• pp.32-45
• /
• 2015

청동현향로(靑銅懸香爐)는 1971년 경기도 하남시 춘궁동에서 발견된 고려시대의 향로이다. 유물의 표면에는 점토가 두껍게 고착되어 있으며, 부식으로 인해 청동병과 다수의 균열이 존재하고 일부분이 결손되어 취약한 상태였다. 청동현향로의 안정한 보존과 전시를 위해 표면에 고착된 이물질을 제거하고 취약한 재질을 강화하였고, 균열부위와 결손부위는 직조유리섬유로 보강하고 에폭시 수지로 복원하였다. 제작기술을 규명하기 위해 성분 분석과 미세조직을 관찰하였다. 성분분석 결과, 몸체, 귀, 고리, 뚜껑, 꼭지부위는 주성분이 Cu-Sn-Pb인 3원계 청동합금으로 주조하였고, 몸체와 귀는 구리의 함량이 높은 구리못으로 고정하였음을 확인하였다. 미세조직은 α상이 대부분이며 Cu와 S이 주성분인 비금속개재물이 존재한다.

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.26-39
• /
• 2014

전자 소자의 구리 금속 배선은 전해 도금을 포함한 다마신 공정을 통해 형성한다. 본 총설에서는 배선 형성을 위한 구리 전해 도금 및 수퍼필링 메카니즘에 대해 다루고자 한다. 수퍼필링 기술은 전해 도금의 전해질에 포함된 유기 첨가제의 영향에 의한 결과이며, 이는 유기 첨가제의 표면 덮임율을 조절하여 웨이퍼 위에 형성된 패턴의 바닥 면에서의 전해 도금 속도를 선택적으로 높임으로써 가능하다. 소자의 집적도를 높이기 위해 금속 배선의 크기는 계속적으로 감소하여 현재 그 폭이 수십 nm 수준으로 줄어들었다. 이러한 배선 폭의 감소는 구리 배선의 전기적 특성 감소, 신뢰성의 저하, 그리고 수퍼필링의 어려움 등 여러 가지 문제를 야기하고 있다. 본 총설에서는 상기 기술한 문제점을 해결하기 위해 구리의 미세 구조 개선을 위한 첨가제의 개발, 펄스 및 펄스-리벌스 전해 도금의 적용, 고 신뢰성 배선 형성을 위한 구리 기반 합금의 수퍼필링, 그리고 수퍼필링 특성 향상에 관한 다양한 연구를 소개한다.

• 자원리싸이클링
• /
• 제30권5호
• /
• pp.25-31
• /
• 2021

폐리튬이온배터리를 고온에서 용융환원처리하면 코발트, 니켈 및 구리가 환원된 금속을 얻을 수 있다. 본 논문에서는 상기 금속외에 망간, 철 및 규소가 같이 환원된 금속합금의 침출을 조사하였다. 침출용액으로 염산에 과산화수소를 산화제로 첨가해 염산과 산화제의 농도, 반응시간 및 온도와 광액밀도를 변화시켜 니켈, 코발트 및 구리를 99% 이상 침출시킬 수 있는 조건을 조사하였다. 과산화수소 농도와 광액밀도가 금속의 침출에 미치는 영향이 현저했으며 20에서 80℃의 반응온도범위에서 반응온도는 침출에 큰 영향을 미치지 않았다. 2M의 염산용액에서 5%의 과산화수소를 혼합한 용액으로 60℃의 반응온도와 30 g/L의 광액밀도조건에서 150분 반응시키면 규소를 제외한 모든 금속이 99% 이상 침출되었다.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.609-616
• /
• 2008

Conventional bake-hardenable(BH) steels should be annealed at higher temperatures because of the addition of Ti or/and Nb which forms carbides and raises recrystallization start temperature. In this study, the development of new BH steels without Ti or Nb addition has been reviewed. The new BH steels have nearly same mechanical properties as the conventional BH steels even though it is annealed at lower temperature. The steels also show smaller deviation of the mechanical properties than that of the conventional BH steels because of the conarol of solute carbon content during steel making processes. The deviation of mechanical properties in conventional BH steels is directly dependent on the deviation of solute carbon which is greatly influenced by the amount of the carbide formers in conventional BH steels. Less alloy addition in the newly developed BH steels gives economical benefits. By taking the advantage of sulfur and/or nitrogen which scarenge in Interstitial-Free or conventional BH steels, fine manganese sulfides or nano size copper sulfides were designed to precipitate, and result in refined ferrite grains. Aluminum nitrides used as a precipitation hardening element in the developed steels were also and resull in fine and well dispersed. As a result, the developed steels with less production cost and reduced deviation of mechanical properties are under commercial production. Note that the developed BH steels are registered as a brand name of MAFE(R) and/or MAF-E(R).

• 한국재료학회지
• /
• 제28권6호
• /
• pp.317-323
• /
• 2018

Crystal structure of the $L1_2$ type $(Al,X)_3Ti$ alloy (X = Cr,Cu) is analyzed by X-ray diffractometry and the nonuniform strain behavior at high temperature is investigated. The lattice constants for the $L1_2$ type $(Al,X)_3Ti$ alloys decrease in the order of the atomic number of the substituted atom X, and the hardness tends to increase. In a compressive test at around 473K for $Al_{67.5}Ti_{25}Cr_{7.5}$, $Al_{65}Ti_{25}Cr_{10}$ and $Al_{62.5}Ti_{25}Cu_{12.5}$ alloys, it is found that the stress-strain curves showed serration, and deformation rate dependence appeared. It is assumed that the generation of serration is due to dynamic strain aging caused by the diffusion of solute atoms. As a result, activation energy of 60-95 kJ/mol is obtained. This process does not require direct involvement. In order to investigate the generation of serrations in detail, compression tests are carried out under various conditions. As a result, in the strain rate range of this experiment, serration is found to occur after 470K at a certain critical strain. The critical strain increases as the strain rate increases at constant temperature, and the critical strain tends to decrease as temperature rises under constant strain rate. This tendency is common to all alloys produced. In the case of this alloy system, the serration at around 473K corresponds to the case in which the dislocation velocity is faster than the diffusion rate of interstitial solute atoms at low temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1328-1333
• /
• 2005

This paper presents the temperature-pressure characteristics of a new SMH actuator using a Peltier module. The SMH actuator is characterized by its small size, low weight, noiseless operation, and compliance similar to that of the human body. The simple SMH actuator, consisting of the plated hydrogen-absorbing alloys as a power source, Peltier elements as a heat source, and a cylinder with metal bellows as a functioning part has been developed. To improve the thermal conductivity of the hydrogen-absorbing alloy, an assembly of copper pipes has been used. It is well known that hydrogen-absorbing alloys can reversibly absorb and desorb a large amount of hydrogen, more than about 1000 times of their own volume. The hydrogen equilibrium pressure increases when hydrogen is desorbed by heating of the hydrogen-absorbing alloys, whereas by cooling the alloys, the hydrogen equilibrium pressure decreases and hydrogen is absorbed. The new special metal hydride (SMH) actuator uses the reversible reaction between the heat energy and mechanical energy of a hydrogen absorbing alloys. The desirable characteristics of SMH actuator, which makes it suitable for the uses in medical and rehabilitation applications, have been also studied. For this purpose, the characteristics of the new SMH actuator for different temperature, pressure, and external load were explored.

• 한국수소및신에너지학회논문집
• /
• 제7권2호
• /
• pp.157-164
• /
• 1996

The AB5-type metal hydride electrodes using $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$(LM : Lanthaniumrich Mischmetal) alloy powders(${\leq}200$mesh) which were coated with 25wt% copper in an acidic bath were prepared with or without addition of 10wt% PTFE as a binder. Prior to electrochemical measurements, the electrodes were sintered at $40^{\circ}C$ for 1 and 2hrs in vacuum with Mm(mischmetal) and sponge type Ti getters. The properties such as maximum capacity, cycle life and mechanical strength of the negative electrode have been investigated. The surface analysis of the electrode was also obtained before and after charge-discharge cycling using scanning electron microscope(SEM). From the observations of electrochemical behavior, it was found that the sintered electrode shows a lower maximum discharge capacity compared with non-sintered electrode but it shows a better cycle life. For the both electrodes with or without addition of PTFE binder, the values of mechanical strength were obtained, and their values increased with increasing sintering time. However, there is little difference of discharge capacity for both electrodes.

• 한국재료학회지
• /
• 제8권9호
• /
• pp.819-824
• /
• 1998

합금의 주조시 냉각속도가 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$ 소결자석의 결정립 분포와 착자특성에 미치는 영향에 대하여 조사하였다. 냉각속도가 높은 Cu mold를 사용하여 제작한 시료는 좁은 결정립 분포와 착자특성의 향상을 보였다. B화합물을 생성하는 Cr, Mn, Nb 그리고 w과 같은 첨가원소가 Nd-Fe-B계 소결자석의 착자특성에 미치는 영향에 대해서도 조사하였다. Cr이나 W첨가는 보자력의 향상에 효과적이고 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{Cr}_{4}\textrm{B}_{9}$합금은 $\textrm{Nd}_{16}\textrm{Fe}_{72}\textrm{V}_{4}\textrm{B}_{8}$합금과 비슷한 착자특성을 보였다.