• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.65-71
• /
• 2002

This study was performed to observe the microhardness change of the surface and the bonding strength between the porcelain and alloy specimens in order to investigate the effects of appended indium, tin and copper on interfacial properties of Au-Pd-Ag alloys. The hardness of castings was measured with a micro-Vicker's hardness tester. The interfacial shear bonding strength between alloy specimen and fused porcelain was measured with a mechanical testing system(MTS 858.20). The microhardness of Au-Pd-Ag alloy was increased by adding indium and tin, but not increased by adding copper. The shear bonding strength of Au-Pd-Ag-Sn alloy and Au-Pd-Ag-Cu alloy showed 87MPa, 57MPa. The higher concentration of adding elements showed the higher shear bonding strength.

• 한국재료학회지
• /
• 제15권4호
• /
• pp.240-245
• /
• 2005

An oxygen free copper was severely deformed by accumulative roll-bonding (ARB) process for improvement of its mechanical properties. Two copper sheets 1 m thick, 30 mm wide and 300 m long are first degreased and wire-brushed for sound bonding. The sheets are then stacked to each other, and roll-bonded by about $50\%$ reduction rolling without lubrication at ambient temperature. The bonded sheet is then cut to the two pieces of same dimensions and the same procedure was repeated to the sheets up to eight cycles $(\varepsilon-6.4)$. TEM observation revealed that ultrafine grains were developed after the third cycle, and their size was slightly increased at higher cycles. Tensile strength of the copper increased with the strain at low strain levels, but it hardly increased from 3 cycles $(\varepsilon>2.4)$ due to occurrence of dynamic recovery, even if the imposed strain increased.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
• /
• pp.383-390
• /
• 2005

Effect of applying a DC voltage on the interfacial reaction at the metal to zirconia interface was investigated utilizing an oxygen ionic conductivity of partially stabilized zirconia. The joining of copper rod and zirconia tube was carried out in Ar gas atmosphere at $1000^{\circ}C$. There are two type of the joining. The one is the reaction bond consisting of copper and zirconia was dominated by surface reaction with a undetectable very thin layer. It was found that copper elements were diffused to zirconia side, but that Zr ions were not diffused to copper side. These results mean application of a DC voltage to migrate oxygen to the copper-zirconia interface can oxidize metal at the copper-zirconia interface and the bonding reaction between zirconia and copper oxide may occur. The other is the reaction bonding was dominated by interdiffusion with a very thick interface layer. This result mean application of a DC voltage can reduce zirconia at the interface. The bonding reaction is to be an alloying between Zr and Cu.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.361-365
• /
• 2007

A deoxidized low-phosphorous copper processed by eight cycles of accumulative roll-bonding (ARB) was annealed at various temperatures ranging from 100 to $400^{\circ}C$. The annealed copper was characterized by transmission electron microscopy (TEM) and tensile & hardness test. TEM observation revealed that the ultrafine grains developed by the ARB still remained up to $350^{\circ}C$, however above $400^{\circ}C$ they were replaced by equiaxed and coarse grains due to an occurrence of the static recrystallization. The hardness of the copper decreased slightly with the annealing temperature up to $350^{\circ}C$, however they dropped largely above $400^{\circ}C$. Annealing characteristics of the copper were compared with those of an oxygen free copper processed by ARB and subsequently annealed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.437-440
• /
• 2000

Composite material consists of more than two materials and make various kinds of composite materials by combining different single materials. Copper clad aluminum composite material is composed of Al and Cu, and it has already been put to practical use in Europe because of its economic benefits. This paper presents the interface bonding according to the variation of extrusion ratio and semi-angle die by observing the interface between Cu and Al using metal microscope. By that result, we can predict the conditions of the interface bonding according to the extruding conditions.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.101-105
• /
• 1990

약 $900^{\circ}C$에서 합성된 코디에라이트의 합성 방법인 졸겔방법은 구리와 세라믹간의 상호 열처리를 가능하게 해준다. 구리와 코디에라이트 기판과의 강한 결합은 eutectic bonding 기술로 얻어질 수 있다. 구리와 코디에라이트의 접촉면에서 미시적 특성을 STEM을 이용하여 연구하였는데 구리의 확산은 강한 화학적, 구조적 변화와 함께 접촉면 영역에서 이루어지고 있다. 비록 이들 접촉면이 강한 접촉력을 가지고 있지만 접촉면에서 구리화합물의 형성에 대한 명백한 입증을 얻어내지는 못하였다.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.521-525
• /
• 2007

The microstructure and mechanical properties of an oxygen free copper processed by accumulative roll bonding(ARB) at low strain rate were studied. The copper sheets were highly strained up to an equivalent strain of ${\sim}6.4$ by ARB process at ambient temperature. The strain rate of the copper during the ARB was $2.6sec^{-1}$. The microstructure and mechanical properties of the ARB-processed copper were compared to those of the specimens processed by ARB at relatively high strain rate ($37sec^{-1}$). The microstructure and mechanical properties of the copper with ARB process was very similar to each other despite of some differences in recovery.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.555-559
• /
• 2005

An oxygen free copper severely-deformed by eight cycles (an equivalent strain of $\~6.4$) of accumulative roll-bonding (ARB) was annealed at various temperatures ranging from 100 to $300^{\circ}C$. The annealed copper was characterized by transmission electron microscopy (TEM) and tensile & hardness test. TEM observation revealed that the ultrafine grains developed by the ARB still remained up to $150^{\circ}C$, however above $200^{\circ}C$ they were replaced by equiaxed and coarse grains due to an occurrence of the static recrystallization. Tensile strength and hardness of the copper decreased slightly with the annealing temperature up to $150^{\circ}C$, however they dropped largely above $200^{\circ}C$. Annealing characteristics of the copper were compared with those of a commercially pure aluminum processed by ARB and subsequently annealed.

• 한국산학기술학회논문지
• /
• 제9권1호
• /
• pp.9-15
• /
• 2008

모꾸메가네는 나무결 모양을 낼 수 있는 고부가가치가 가능한 장신구 소재이며 서로 다른 금속을 가공하기 위해 융점이 다른 두 가지 이상 금속을 적층하여 붙인 잉곳 제작이 필수적이다. 기존의 모꾸메가네용 잉곳은 숯을 이용한 환원성 분위기에서 경험에 근거한 육안 판별로 만들어져서 접합의 신뢰성과 후속 가공 도중 층간 분리가 일어나는 분제가 있었다. $900^{\circ}C$에서 2.5kg의 압력을 가하면서 진공 열처리로를 이용하여 90% 이상 접합율이 가능한 조건을 확인하였다. 계면에서의 계면 확산계수가 통상의 벌크 확산계수보다 100배 향상되는 것을 확인하였고 이종 접합시에 계면 확산계수를 확인하여 $700^{\circ}C$의 저온에서 10분동안 진공열처리, 90% 이상 접합율을 가진 모꾸메가네용 잉곳을 성공적으로 제조하였다. 제조된 잉곳으로 핸드폰 외장용 모꾸메가네 시작품을 성공적으로 제조할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.297-299
• /
• 2003

In this paper, we present the fabrication of copper electrode array and test of electrochemical discharge machining for the fabrication of microholes on Borofloat33 glass. Copper electrode array is fabricated by the bonding of silicon upper substrate and lower substrate and copper electroplate. The silicon upper electrode having microholes fabricated by ICP-RIE is the mold of copper electroplate. The lower substrate is used as the seed layer for copper electroplate after Au - Au thermocompression bonding with the upper substrate.