• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.220-237
• /
• 2001

Over the 20th century global temperature increase has been 0.6$^{\circ}C$. The globally averaged surface temperature is projected to increase by 1.4 to 5.8$^{\circ}C$ over the period 1990 to 2100. Nearly all land areas will have higher maximum temperature and minimum temperature, and fewer cold days and frost days. More intense precipitation events will take plate over many areas. Over most mid-latitude continental interiors will have increased summer continental drying and associated risk of drought. By 2100, if the annual surface temperature increase is 3.5$^{\circ}C$, we will have 15.9$^{\circ}C$ from 12.4$^{\circ}C$ at present. Also the annual precipitation will range 1,118-2,447 mm from 972-1,841 mm at present in Korea. Consequently the average crop periods for summer crops will be 250 days that prolonged 32 days than at present. In the case of gradual increase of global warming, an annual crop can be adapted to the changing climate through the selection of filial generations in breeding process. The perennial crops such as an apple should be shifted the chief producing place to northern or high latitude areas where below 13.5$^{\circ}C$ of the annual surface temperature. If global warming happens suddenly over the threshold atmospheric greenhouse gases, then all ecosystems will have tremendous disturbance. Agricultural land-use plan, which state that farmers decide what to plant, based on their climate-based advantages. Therefore, farmers will mitigate possible negative imparts associated with the climate change. The farmers will have application to use agricultural meteorological information system, and agricultural long-range weather forecast system for their agroecosystems management. The ideal types of crops under $CO_2$ increase and climate change conditions are considered that ecological characteristics need indispensable to accomplish the sustainable agriculture as the diversification of genetic resources from yield-oriented to biomass-oriented characteristics with higher potential of $CO_2$ absorption and primary production. In addition, a heat-and-cold tolerance, a pest resistance, an environmental adaptability, and production stability should be also incorporated collectively into integrated agroecosystem.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.251-271
• /
• 2015

This article examines the HRD implications of using robotic technology in the workplace. Because existing literature has been primarily about the technical engineering aspects of robotics, it is difficult to understand the socio-cultural perspective about the challenges and potentials of robotization in the workplace. Especially, in order to identify the best organizational support appropriate for working with robots, this article indicates alternative perspective for observing human-robot interaction in the workplace. In addition, this article points out four implications of robotic technology in organizations for practice and research development in HRD. These implications were identified as (1) defining the components of expertise in terms of human-robot interaction, (2) coping with organizational change process resulting from robotic technology, (3) designing appropriate interventions for an organization to effectively assist human-robot interaction, and (4) establishing the code of work ethics in the robotic age. The suggested implications can contribute to shaping conceptual frameworks for further empirical social science research.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.64-76
• /
• 2002

This study was performed to identify the level of stress of clinical practice and clinical competency and the relationships between stress of clinical practice and clinical competency in nursing students. The subjects of this study were 379 senior nursing students in 2 nursing colleges in M city. The data were collected from November 5th to 24th, 2000, using questionnaire. The instruments used were the Stress of Clinical Practice Scale and the Clinical Competency Measurement Tool. The data were analyzed using frequency, percentage, t-test, ANOVA, and Pearson's Correlation Coefficient, using the SPSS program. The results of the study were as follows : 1. The mean score for the level of stress of clinical practice was 3.83 points. The stress of clinical practice were classified into six dimensions and their order of getting score was nurse(3.99), relationship between nursing theory and practice(3.94), human relationship (3.92), clinical education and evaluation by professors(3.87), environment(3.70), and patient(3.59). 2. The mean score for the level of clinical competency was 3.91 points. The clinical competency were classified into five dimensions and their order of getting score was professional development (4.08), skills (4.06) , interpersonal relationship/communication(3.95), teaching/coordinating(3.81), and nursing process(3.70), 3. The stress of clinical practice showed significant difference in the score of grade(t=-2.82, p=.005), interpersonal relationship(t=1.97, p=.049) and satisfaction of major(F=3.38, p=.035) of nursing students. 4. The clinical competency showed significant difference in the score of grade(t=-5.97, p=.000). interpersonal relationship(t=3.64, p=.000) and satisfaction of major(F=8.73, p=.000) of nursing students. 5. The data showed the positive correlations between stress of clinical practice and clinical competency(r=.209, p=.000). In conclusion. this study found that the stress of clinical practice was significantly related to clinical competency in nursing students. Therefore further study is needed to examine the efficient coping strategies about stress of clinical practice in nursing students.

• Journal of Agricultural Extension & Community Development
• /
• v.21 no.1
• /
• pp.143-176
• /
• 2014

In this study, the multicultural families female marriage immigrants experience life in Korea to evaluate the difficulty. To this end, a multi-cultural families living in Gyeonggi Province accomplished female marriage immigrants choose eight people to consensual conduct in-depth interviews with qualitative analysis methods(CQR) were analyzed using. The findings in the three categories and therefore the region of 49 to 12 depending on the frequency analysis. Female marriage immigrants living in Korea psychological and emotional difficulties experienced in the relationship with your spouse, in-laws and relations, communication problems, difficulties in expressing emotional difficulties, respectively. Social and economic difficulties experienced discriminatory gaze, economic hardship, as a multicultural families become psychological atrophy, life, customs, and cultural differences, respectively. The process of coping with these experiences self-help meetings, participate in cultural programs, and community systems were used. By the results of this study multicultural families immigrant women to help overcome difficulties in the practical help and social services to the community through the ongoing support system was required to suggestions.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2012

In spite of growing demand for the region specific statistics, due to the increase in the cost of making out statistics and other reasons, utilizing survey statistics has limitation on coping with it. Thus, administrative statistics could be a feasible option. In this study, we selected "representative statistics", which are frequently used in establishing regional policy and reflect regional characteristics, among the Jeollabuk-do's administrative statistics. And we suggested the way to enhance quality and credential of the administrative statistics by using systematic management. As a result, we selected 45 statistics for Jeollabuk-do's "representative statistics". The reason that we raise the issue on the necessity of selecting "representative statistics" and specify its selection process is to give guidance to systematic management and efficient utilization of the local government's administrative statistics.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.447-458
• /
• 2002

The primary purpose of this study is to provide a useful insight for developing effective teaching and student counseling methods by understanding the relationship between four preference patterns of MBTI personality types and EWHA defense mechanisms of nursing college students. Method: The data used in this research were collected administrating EWHA defense mechanism test and MBTI personality type instrument to 195 nursing students in the period of November 3 through September 16 in 2000. Collected data were analysed by pc-SPSS 10.0. Result: Three general conclusions were drawn from the study results: (1) in terms of personality type, 'Extraversion', 'Sensing', 'Thinking', and 'Judgement' types showed high frequency respectively; (2) in terms of defense mechanism, 'Identification' showed the highest score, and then 'suppression' scored next followed by 'Humor'. However, 'Acting out' showed the lowest average score, and then 'Projection' followed by 'Denial'; (3) Based on the relationship between defense mechanism and four MBTI preference patterns, it can be drawn that students with the preference of 'Extraversion' usually use defense mechanism of 'Altruism', 'Sublimation', 'Distortion', 'Controlling', and 'Humor'. In comparison, students with the preference of 'Introversion' often use the defence mechanism of 'Evasion' and 'Projection'. Conclusion: The study results can be utilized in both fields of education and counseling: (1) in the field of education, this study can provide a basis for developing a suitable teaching method for each personality types of nursing students; (2) for counseling practitioners, the results of this study provide the useful insights to understand nursing college students' communication skills, behavior patterns, and ability of coping with problems in the process of counseling.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.1-13
• /
• 2001

An absolutely passive fit at the interface with the superstructure and the abutment cylinders is need for implant longevity. In this study, a method of cast framework correction using spark erosion technology was evaluated. Electric discharge machining(EDM) is a process that uses electrical discharges, or sparks, to machine metal, The surface being machined is bombared with high-intensity electrical energy pulses that gradually melt away the stock until the desired configuration is obtained. Master model was fabricated by using metal block impression analogue, which fired 5 Branemark squared impression coping in an arc shaped metal block. Then framework using 4mm standard gold cylinder and type IV gold alloy was fabricated. In order to measure the fit of the framework we used both contact and noncontact coordinate measurement machine and data was processed by computer program. After superimposition of gold framework and master model numeric image data the distances between gold cylinder bearing surfaces and abutment replica bearing surfaces, and the angle deviations between gold cylinder and abutment replica centroid points were calculated. The results were as follows 1 The total mean distance (p<0.01) and standard deviation (p<0.001) between the gold cylinders and abutment bearing surfaces were significantly decreased after EDM 2. The total mean of maximum distances was significantly decreased after EDM (p<0.05). 3. After EDM, the mean angle deviation between centroid points was decreased.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.28-33
• /
• 2010

Solar collectors to be applied are mainly flat-plate or vacuum tube collector which is used for hot water supply of house because of low heat value and low temperature. There are a necessity to expand applicable scope of solar collector into the industrial process heat source and air conditioner for coping with renewable energy policy of government and industrial trend. This study is to analysis the performance of PTC solar collector of concentrating type and flat-plate of non-concentrating. For this, temperature difference and heating value as insolation of air outside is measured from these two collectors mounted on 2-axial solar tracking system. It is investigated that temperature profile obtained from PTC solar collector is uniform and collecting heat per unit area is 6.8kcal/$m^2$ min which is about 3 times with compare to flat-plate collector of 2kcal/$m^2$min. Also the amount of heat to be produced from PTC solar collector is 3 Mcal/$m^2$ which is about 2 times with compare to flat-plate collector of 1.5Mcal/$m^2$ as a result of operating these two collectors during one month. Therefore, it is obtained that heat collecting performance of PTC solar collector is superior to flat-plate.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.265-276
• /
• 2018

Background: Resilience engineering is a paradigm for safety management that focuses on coping with complexity to achieve success, even considering several conflicting goals. Modern sociotechnical systems have to be resilient to comply with the variability of everyday activities, the tight-coupled and under-specified nature of work, and the nonlinear interactions among agents. At organizational level, resilience can be described as a combination of four cornerstones: monitoring, responding, learning, and anticipating. Methods: Starting from these four categories, this article aims at defining a semiquantitative analytic framework to measure organizational resilience in complex sociotechnical systems, combining the resilience analysis grid and the analytic hierarchy process. Results: This article presents an approach for defining resilience abilities of an organization, creating a structured domain-dependent framework to define a resilience profile at different levels of abstraction, and identifying weaknesses and strengths of the system and potential actions to increase system's adaptive capacity. An illustrative example in an anesthesia department clarifies the outcomes of the approach. Conclusion: The outcome of the resilience analysis grid, i.e., a weighed set of probing questions, can be used in different domains, as a support tool in a wider Safety-II oriented managerial action to bring safety management into the core business of the organization.