• Journal of Korean Academy of Nursing
• /
• v.45 no.5
• /
• pp.694-703
• /
• 2015

Purpose: This study was a prospective longitudinal study to identify changes in quality of life in patients undergoing allogeneic hematopoietic stem cell transplantation (HSCT). It was based on Roy's adaptation model. Methods: The questionnaires were administered before HSCT, 30 and 100 days after HSCT. Of the 48 potentially eligible patients, 44 (91.7%) participated in the study and 40 (90.9%) completed the questionnaires at 100 days after HSCT. Multilevel analysis was applied to analyze changes in quality of life. Results: Overall, quality of life showed a decreasing tendency from pre-HSCT to 100 days after HSCT. The adaptation level of participants was compensatory. Type of conditioning was the significant factor influencing quality of life before HSCT (${\beta}_{00}$=79.92, p <.001; ${\beta}_{01}$= - 12.64, p <.001) and the change rate of quality of life (${\beta}_{10}$= - 1.66, p =.020; ${\beta}_{11}$=2.88, p =.014). Symptom severity (${\beta}_{20}$= - 1.81, p =.004), depression (${\beta}_{30}$= - 0.58, p =.001), social dependency (${\beta}_{40}$= - 0.35, p =.165), and loneliness (${\beta}_{50}$= - 0.23, p =.065) had a negative effect on changes in quality of life. Symptom severity and depression were statistically significant factors influencing changes in quality of life. Conclusion: According to the results of this study, the development of nursing intervention is needed to improve quality of life in patients undergoing allogeneic hematopoietic stem cell transplantation in the early immune reconstruction period. The interventions should include programs to enhance coping capacity and programs to help control symptom severity and depression. Also these interventions need to be started from the beginning of HSCT and a multidisciplinary approach would be helpful.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.508-519
• /
• 2020

During transients or accidents, the reactor core is uncovered, and droplets entrained above the quench front collides with the uncovered fuel rod surface. Droplet impact cooling can reduce the peak cladding temperature. Besides zirconium-based cladding, versatile accidental tolerant fuel (ATF) claddings, including FeCrAl, have been proposed to increase the accident coping time. In order to investigate the effect of surface properties on droplet impact cooling of cladding surfaces, the droplet impact phenomena are photographed on the FeCrAl and zircaloy-4 (Zr-4) surfaces under different conditions. On the oxidized FeCrAl surface, the Leidenfrost phenomenon is not observed even when the surface temperature is as high as 550 ℃ with We > 30. Comparison of the impact behaviors observed on different materials shows that nucleate and transition boiling is more intensive on surfaces with larger thermal conductivity. The Leidenfrost point temperature (LPT) decreases with the solid thermal effusivity (${\sqrt{k{\rho}C_p}}$). However, the CHF temperature is relatively insensitive to the surface oxidation and Weber number. Droplet spreading diameter is analyzed quantitatively in the film boiling stage. Based on the energy balance a correlation is proposed for droplet maximum spreading factor. A mechanistic model is also developed for the LPT based on homogeneous nucleation theory.

• Journal of Korean Public Health Nursing
• /
• v.31 no.3
• /
• pp.505-517
• /
• 2017

Purpose: This study was conducted to investigate factors affecting the somatizationof 4th grade elementary school students in South Korea. Methods: The research used cross-sectional data of 2,031 first grade elementary school students that participated in 4th-year Korean Children and Youth Panel Survey (KCYPS). Data analysis, which included descriptive statistics, t-tests, one-way ANOVA, Pearson's correlation, and hierarchical regression,was performed using SPSS/WIN 23.0. Results: Aggression (r=0.60, p<.001) and depression (r=0.69, p<.001) showed significant positive correlation, while affection (r=-0.22, p<.001), reasonable explanation (r=-0.28, p<.001), peer relationship (r=-0.06, p=.001), and teacher relationship (r=-0.20, p<.001) were negatively correlated with somatization of elementary school students. Hierarchical regression analysis revealed that depression (${\beta}=0.52$, t=25.52, p<.001), aggression (${\beta}=0.27$, t=13.30, p<.001), reasonable explanation (${\beta}=0.05$, t=2.99, p=.002), and affection (${\beta}=0.04$, t=2.13, p=.031) were significant predictors of somatization. This regression model has an explanatory power of 52.8%. Conclusion: To reduce somatization, it is necessary to develop a therapeutic intervention to change student emotions into a positive coping mechanism and strategy. The results of this study will contribute to the development of programs and practices for healthy school life.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.185-190
• /
• 2016

Breast cancer is the first or second malignancy among women worldwide. Illness perception (IP) and quality of life (QoL) are major issues considering breast cancer management. An attempt was here made to inspect the predictive variables influencing IP and their impact on QoL in cancer patients. The key predictors adapted from previous studies including life satisfaction, perceived social support, self-esteem, hope, optimism, and spiritual well being were taken into account. Our sample included 200 female volunteers suffering from breast cancer applying exclusion criteria. The data were collected using various questionnaires and statistically analyzed by means of path analysis and structural equation modeling. The results revealed that of the six predictors, spiritual well being and social support had direct effects on QoL and IP. The only path with significant indirect correlation with IP was social support. Spiritual well being had the second significant direct effect on IP. Self-esteem occupied the third rank in direct effects on both QoL and IP. In conclusion, here in Iran and most likely in other strongly religious communities, spiritual intervention is an effective strategy to raise QoL. Also social support helps women suffering from breast cancer to experience better conception and coping strategies.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.3
• /
• pp.389-400
• /
• 2007

Statement of problem. Use of the conventional dental impression procedure is problematic in patients who have difficulty opening their mouth, difficulty breathing through their nose or tendency to gag. Purpose. It is necessary to make individual trays more comfortable for patients during impression taking procedure. It was reported at the KAP Annual Meeting 2001 Seoul that an improved impression technique was suitable for this purpose. In this study, the accuracy of the improved dental impression method for implant was compared with the conventional dental impression method. Material and methods. An oral simulator was made from clear acrylic resin block which had similar form of edentulous ridge. For setting up the standard, five fixtures were installed on it. Study casts were made using two kinds of impression techniques. One was the conventional method that was taken using silicone impression material and an individual resin tray under connection of inter-fixture relation. The other was the improved method in which was the connection of the impression coping and the thermoformed polymethyl methacrylate tray. In addition, two different study casts were made from the improved impression body. The coordinates of the fixture on the study model were measured by three-dimensional coordinate measuring equipment. Then the distances between each fixture were calculated and compared with that of oral simulator. Accuracy of the each impression method was also assessed. Results. The differences of inter-fixture dimension between study casts and simulator in the improved impression technique showed $0.014{\pm}0.016mm$ and $0.017{\pm}0.022mm$, respectively and that of the conventional method was $0.017{\pm}0.014mm$. There was no significant difference between the improved impression technique and conventional method. Conclusion. The improved impression technique is useful for multiple support implants.

• Women's Health Nursing
• /
• v.10 no.1
• /
• pp.32-41
• /
• 2004

Purpose: The purpose of this study was to explore and describe the process of life adaptation in women with cervical cancer. Method: A grounded theory method with guided data collection and analysis was used. Fifteen women with cervical cancer who had some kind of treatment at the hospital were asked open-ended and descriptive questions with a guideline. All interviews were tape-recorded and transcribed verbatim. Result: The core category that emerged from the comparative analysis was "overcoming cancer" named as a process of life adaptation in the participants. The process of overcoming cancer evolved three stages - "admitting reality", "attempting health-care" and "continuing health-care". Depending on the paradigm model, the central phenomena of the experiences was "powerlessness". The internal factors motivating women to overcome cancer were "denial of cancer" and "desire for life". Strategies of overcoming cancer included "living as a cancer patient," "selective food eating," "steady exercising," "getting rid of stress," and "preparing for death". The intervening conditions, "supportive system," "forms of life," and "burden on family," influenced overcoming cancer. Conclusion: The results of this study could help clinical nurses to understand life adaptation in cervical cancer patients and establish efficient coping strategies in dealing with the problems they face.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.349-353
• /
• 2001

Korea has a variety of favorable conditions for utilizing wind as energy. First of all, as a geographical characteristic, it is a peninsular country with its three frontiers surrounded by sea. Such a location makes the country influenced, all the year round, both by sea winds and by seasonal winds, so that it has a good possibility of putting its rich wind resources to use as an energy source. Particularly, in view of the results of observations and analysis of actual data about wind sources, it is quite possible to build wind paver plants in many regions across the country, such as inhabited islands dotted on its southern and western coasts around the Korean peninsular, a number of uninhabited islets attached the main islands, large-scaled reclaimed lands, and major inland areas. In Korea, the attempt to develop the technology of wind paver generation started in the 1970's. It was since 1988, when the Law on the promotion of Alternative Energy Development was enacted, that research and development activities for employing the wind force as a part of energy source have got into full swing. At that moment, however, due to the low level of domestic technological development, such efforts were mainly focused on the attainment of basic technologies with regard to wind power generation. Recently, there have been many noticeable changes in the international as well as domestic environments, such as the conclusion of the International Climate Treaty and the increase in public concerns of natural environment. It is quite possible to predict that the demand for wind paver generation will increase in the near future. Therefore, recognizing that wind, as a clean energy source, can be a promising method for coping with the International Climate Treaty and for replacing the fossil fuel, oil, this essay investigates the development history of wind paver generation systems and the status of technological development in Korea and presents an appropriate model for the development of the paver generation system that can compete with other energy sources.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.4
• /
• pp.67-76
• /
• 2019

Purpose - This study attempted to construct and validate a structural model of the relationship between the quality of medical services, perceived risk, reputation and customer satisfaction, which is the main concept of the relationship between large hospitals as well as small and medium hospitals and medical consumers. Through this verification, the small and medium hospitals are to find the way for wise coping in competitive situation with large hospitals. Research design, data, and methodology - This research developed a hypothesis by constructing a structural equation that reaches the satisfaction and the relationship between reputation of perceived risk and perceived risk of service quality perceptions of customers of small and medium hospitals. Research data were collected through a questionnaire survey of respondents who had medical service experience from small and medium hospital. A total data of 252 respondents were used as the sample for the final analysis and analyzed using SPSS 23.0 and AMOS 23. Results - As a result, the relationship of quality of medical service, reputation, and customer satisfaction among small and medium hospitals was consistent with the results of precedent studies, and the perceived risk has a significant impact on reputation, so the greater the perceived risk, the higher the preference for reputable medical institutions as large hospitals. In addition, it was found that the direct route from perceived risk to customer satisfaction was not significant, and reputation was found to have a full mediating effect on perceived risk and customer satisfaction. Customers who use small and medium hospitals prefer to use reputable medical institutions if their perceived risk is high, which is different from risk perception when specific targets are specified. Conclusions - In terms of the effect from customer satisfaction, not only the path of perceived risk → reputation → customer satisfaction, but also the quality of service quality → reputation → customer satisfaction. These findings suggest that small and medium hospitals are appropriately responding to competition with large hospitals, rather than focusing on the perceived risks and reputation of customers in establishing and utilizing competitive strategies to create new customers and preserve existing customers.