• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.24-29
• /
• 2007

Finite element analysis for induction heating process including magnetic and thermal situations is presented. Because magnetic and thermal material properties vary with the temperature, material properties depending on temperature are considered. As the inductor moves, the solution domains corresponding to the inductor change into those of the air and the solution domains corresponding to the air change into those of the inductor. For these reasons, modeling of induction heating process is very difficult with a general purpose commercial programs. In this paper, three dimensional analysis of induction heating process for moving inductor is analyzed using moving coordinate. The skin effect is confirmed inside the steel plate in the electro-magnetic analysis. The distribution of heat generation at the initial state is different from that at the quasi-stationary state. Therefore, material properties depending on temperature must be considered. The calculated results of finite element analysis agree well with the experimental temperature results. This approach is suitable to solve magneto-thermal coupled problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2777-2781
• /
• 2001

This paper presents an algorithm of the watermark insertion and extraction on the vector image. Most parts of the vector image consist of the array of the coordinate values. The vector watermarking method by Sakamoto et al [1] uses the mask within which all the coordinate values of all the vertices are changed depending on the value of the watermark. The proposed algorithm is the change of the vector image file instead of the change of the coordinate values on the vector image. We use the Drawing Exchange Format (DXF) files since the DXF file is one of the general files in the field of the vector image.

• 한국환경과학회지
• /
• 제3권1호
• /
• pp.11-16
• /
• 1994

Generally, it is difficult to predict water quality in a tidal river, because tidal flows make the transport phenomena more complicated. The purpose of this study is to clarify long-term mass transport in a tidal river through suggestion of simulation model. A simulation model based on a Lagrangian coordinate system, which has the advantage reducing numerical dispersion, was used to calculate changes in concentration of chlorides. Several field surveys were conducted to verify calculated results. Concludingly, long-term behavior of mas transport in a tidal river can be represented using the model.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권1호
• /
• pp.65-72
• /
• 2010

For developing navigation system of total hip arthroplasty (THA) and evaluating hip joint kinematics, 3-D pose position of the femur and acetabulum in the pelvic coordinate system has been quantified. The pelvic coordinate system is determined by manually indicating pelvic landmarks in multidetector-row computed tomography (MDCT) images. It includes intra- and inter-observer variability, and may result in a variability of THA operation or diagnosis. To reduce the variability of pelvic coordinate system determination, this paper proposes an automated method in MDCT images. The proposed method determines pelvic coordinate system automatically by detecting pelvic landmarks on anterior pelvic plane (APP) from MDCT images. The method calibrates pelvic pose by using silhouette images to suppress the affect of pelvic pose change. As a result of comparing with manual determination, the proposed method determined the coordinate system with a mean displacement of $2.6\;{\pm}\;1.6$ mm and a mean angle error of $0.78\;{\pm}\;0.34$ deg on 5 THA subjects. For changes of pelvic pose position within 10 deg, standard deviation of displacement was 3.7 mm, and of pose was 1.28 deg. We confirmed the proposed method was robust for pelvic pose changes.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7855-7862
• /
• 2015

지적도면정보는 필지단위로 소재지, 지번, 지목, 경계 등의 일정한 사항을 지적측량 등에 의해 등록함으로써 생성된다. 그러나 전산화된 지적도면정보는 경계점좌표가 소수점 3자리인 mm 단위의 등록과 소수점 2자리인 cm 단위로 이원화되어 등록되고 있어 지적행정과 지적측량에 혼란을 초래하고 있다. 본 연구에서는 지적도면정보의 좌표등록과 면적산정에 대한 문제점 분석을 통하여 지적도면정보 좌표등록의 소수점 자리수 통일방안을 제시하고자 하였다. 소수점 자리수에 의한 면적의 변화량을 실험한 결과 토지이동으로 인한 면적의 변동과 미세폴리곤의 발생은 좌표의 등록을 소수점 2자리의 등록을 소수점 3자리로 변경한다면 해결이 가능함을 제시할 수 있었고, 이를 위해 제도적으로 소수점 3자리까지 등록할 수 있도록 법을 개정하여 운용하여야 함을 제시하였다.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.11-17
• /
• 2021

This paper describes the time rate of change of dynamic response of a cantilever beam inserted with a damping element, such as bonding, which is excited under a general force at various locations. A sensitivity analysis was performed in a finite element model to show that two types of second-order algebraic governing equations were used to predict the rate of change of dynamic displacement: one is related to the modal coordinate linked to a physical coordinate, and the other to the design parameter of the time rate of change of displacement. The sensitivity differential equation formulation includes more complicated terms compared with that of the undamped cantilever beam. The sensitivities of the dynamic response were observed by changing the location of the excitation force, displacement extraction, and cross-sectional area of the beam. The analytical results obtained by this suggested theory showed a relatively good agreement when compared with those obtained using the commercial finite element program. The suggested analysis procedure enables the prediction of the response sensitivity for any finite element model of the dynamic system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권3호
• /
• pp.42-49
• /
• 1995

In this study, the optimum structural modification of the L-type structure by shape changes is suggested. The vibration characteristics of L-type structure are analyzed by the sub-structure synthesis method, and the coordinte sensitivities of each sub-structure are calculated and the change quantities of the positions to be modified are suggested by using the coordinate sensitivities. The results obtained are as follows : 1. The sensitivities of the natural frequency could be calculated by the sensitivity analysis. 2. The change quantities of the position to be modified could be suggested by the optimum structural modification method. 3. The developed program could reduce the process and time of computation, since the sensitivity was directly calculated by differential method, not finite difference method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1017-1021
• /
• 1995

Geometric and thermal errors are responsible for major components of the errors of a computer numerically controlled turning center. The planar error of a CNC turning center are comprised of 11 geometric and thermal error components. The error synthesis model is formulated by homogeneous coordinate transformation method and expresses the effect of such error components on the planar error of a CNC turning center. In this paper, the sensitivity analysis of the model on the noises through sensing and the change of temperature is addressed. The sensitivity analysis show that the error systhesis model is robust on the noses and z planar error is much affected by the change of temperatures.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.27-33
• /
• 2000

The purpose of this paper is to present the environment change of Cheju Island as land development process using GSIS(Geo-Spatial Information System) technique. We implemented the process based on the maps of soil color, underground water pollution points, land use, land development planning and land sight seeing supported by Cheju Province Office. To use the maps for GSIS data, first we transformed the picture data of the office into raster structured picture data using scanner. Second, the coordinate system was added to raster data using 1/50000 geographic map. Third, we estimated land planning process using GSIS technique(overlay and reclass technique). The results showed that land development effected the natural environment(forest, green field, farm land). However, the chemical pollution and land sight seeing was not so much effected by the land development that was found.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.67-75
• /
• 1998

Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.