• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.251-252
• /
• 2012

ITER(국제핵융합실험로) 제어시스템은 중앙제어와 Plant System으로 구성되며 CODAC, Central Interlock, Central Safety System으로 구분된다. 초전도자석에 전류를 공급하는 AC/DC 컨버터 시스템은 2상한, 4상한 구조의 전원 장치, 초기 플라즈마 발생에 필요한 Switching Network Unit, 코일에 저장된 에너지의 급속 방전을 위한 Fast Discharge Unit 및 무효 전력 보상장치로 구성된다. 4상한 전원장치는 1, 2, 4, 6대의 전원 장치가 직렬 접속되어 무효전력 발생이 최소로 하도록 제어된다. 대용량의 무효전력이 급격히 변화는 환경에서 계통 전압을 유지하기위해 무효전력보상장치는 각 전원 장치가 예측한 무효전력 값을 이용하여 제어한다. 본 논문은 ITER 전원 장치를 운전하기 위한 제어시스템의 개요와 예비설계 결과이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.492-498
• /
• 2017

In this paper, we integrate a divide-by-3 injection-locked frequency divider (ILFD) in CMOS technology with a $0.18-{\mu}m$ BiCMOS process. We propose a self-injection technique that utilizes harmonic conversion to improve the locking range, phase-noise, and input sensitivity simultaneously. The proposed self-injection technique consists of an odd-to-even harmonic converter and a feedback amplifier. This technique offers the advantage of increasing the injection efficiency at even harmonics and thus realizes the low-power implementation of an odd-order division ILFD. The measurement results using the proposed self-injection technique show that the locking range is increased by 47.8% and the phase noise is reduced by 14.7 dBc/Hz at 1-MHz offset frequency with the injection power of -12 dBm. The designed divide-by-3 ILFD occupies $0.048mm^2$ with a power consumption of 18.2-mW from a 1.8-V power supply.

• Journal of Information Display
• /
• 제11권4호
• /
• pp.173-181
• /
• 2010

In this paper, light-emitting-diode (LED) backlight driving circuits and dimming method for medium-sized and large liquid crystal displays (LCDs) are proposed. The double loop control method, the intelligent-phase-shifted PWM dimming method, the fast-switching current regulator, and the current matching techniques are proposed to improve not only the current regulation characteristics and the power efficiency but also the current matching characteristics and the transient response of the LED current. The brightness of the backlight using the proposed local dimming method was determined from the histogram of the local block to reduce the power consumption of the backlight without image distortion. The measured maximum power efficiency of the LED backlight driving circuit for medium-sized LCDs was 90%, and the simulation results showed an 88% maximum power efficiency of the LED backlight driving circuit for large LCDs. The maximum backlight power-saving ratio of the proposed dimming method was 41.7% in the simulation with a high-contrast image. The experiment and simulation results showed that the performance of LEDs as LCD backlight units (BLUs) improved with the proposed circuits and method.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.151-158
• /
• 2002

본 논문에서는 저 위상잡음과 고안정 특성을 나타내는 디지털 MMDS용 위상고정 발진기를 설계하였으며 전압제어 발진기용 능동소자의 비선형 등가모델에 의하여 저 위상잡음 파라미터와 안정된 전압제어 발진기의 필요충분 조건을 분석하였다. 설계된 전압제어 발진기에 위상고정루프를 적용하여 위상고정 마이크로파 발진기를 구현하였으며 고안정 전압제어 발진기에 대하여 시뮬레이션한 결과 －90dBc/Hz @ 10KHz의 위상잡음을 보였으며 위상고정 마이크로파 발진기에 대한 실험 결과 －85dBc/Hz @ 10KHz의 위상잡음을 얻었다. 고안정도와 저 위상잡음특성을 나타내는 위상고정 마이크로파 발진기의 설계모델을 디지털 MMDS 단말기용 고안정 주파수 합성기로 응용할 수 있음을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.279-282
• /
• 2005

A real-time measurement and control system was developed, This system is used for nurses at hospitals to check the residual quantity and changing time of Ringer's solution in nurses' room. Load Cell is utilized as a sensor to check the residual quantity of Ringer's solution, This Load Cell detects the physical changes of Ringer's solution and transfers electronic signal to the amplifier. Amplified analog signal is converted into digital signal by NO converter. Developed Embedded system, which computes these data with microprocess(8052) then makes it possible to monitor the residual quantity of Ringer's solution real-time on a server computer. A Checking system on Residual Quantity of Ringer's Solution Using Load cell cut costs using a simple design for a circuit

• 전기학회논문지
• /
• 제65권1호
• /
• pp.40-50
• /
• 2016

In order to recover the power system during the wide power outage or power failure in the power plant, black start system should be properly operated without any problem. Especially power for black start in the geographically isolated areas of electric island is supplied from small emergency start-up generator, and loads are aux systems of gas turbines such as SFC(Static frequency converter). This paper introduces the international practices to overcome the voltage drop problem with harmonics of the system having the DC output such as SFC during black start in weak feed system and analyzes the relationship between house load inputs and harmonics. By varying the house load and input of power supply, this paper identified boundaries between weak feed and strong feed power. In order to verify the theory of stable condition in weak feed power system with DC output, house load is simulated using ETAP. Additionally MATLAB was used for harmonic analysis between the load inertia moment and non load inertia moment.

• 전기전자학회논문지
• /
• 제3권2호
• /
• pp.161-167
• /
• 1999

표준 2-poly CMOS 공정을 이용하여 3-입력 neuron-MOSFET의 인버터와 증가형 소자를 사용한 3비트 D/A 변환기를 설계 제작하였다. Neuron-MOSFET를 사용한 인버터의 전압전달 특성곡선과 잡음여유를 일반 CMOS 인버터와 같은 방법으로 측정분석하였다. 결합계수가 전압전달 특성곡선과 잡음여유에 미치는 영향을 이론적으로 계산하여 neuron-MOSFET 인버터의 게이트 산화층 두께와 입력게이트 레이아웃에 대한 설계 가이드라인을 설정하였다. 입력게이트 중 하나를 제어게이트로 사용하므로 offset전압이 없는 neuron-MOSFET D/A 변환기를 설계 제작할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.503-508
• /
• 1992

A new method for making automatic electroencephalogram(EEG) report based on the automatic quantitative interpretation of awake EEG was developed. We first analysed a. relationship between EEG reports and quantitative EEG interpretation done by a qualified electroencephalographer(EEGer) for 22 subjects. Based on the analysed relationship and usual process of report making by the EEGer, we defined all terminology necessary for EEG report and established rules for EEG report making. By the combined use of the proposed EEG report making and the method for automatic quantitative EEG interpretation presented at '90 KACC, we were able to make the automatic EEG reports which were equivalent to the EEG reports written by the EEGer. As all the procedures were programmed in a personal computer equipped with an AD (analogue-to-digital) converter, the automatic EEG reports were obtained in almost real time in usual actual EEG recording situation with only a few seconds time lag for the analysis in the computer. The proposed report making method and the quantitative EEG interpretation method will be effectively applicable to the clinical use as an assistant tool for physicians.

• 설비공학논문집
• /
• 제2권3호
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.978-984
• /
• 2015

본 논문에서는 유무인항공기에서 사용될 통달거리 200 km, 전송속도 45 Mbps급 데이터 전송장비의 RF 송수신기에 대해 다룬다. RF 송수신기는 Ku 대역에서 동작하도록 설계되었으며, 상/하향 변환모듈, 고출력 증폭 모듈, 전단 처리 모듈로 구성된다. 제안된 RF 송수신기의 성능을 만족시키기 위해 출력신호 레벨이 10 W급인 전력 증폭기가 요구되었으며, 이는 GaN 소자기반의 전력증폭기로 구현되었다. 또한, 적응형 전송속도 변환기능이 요구되었고, 이를 위해 다양한 대역폭의 신호를 수신할 때의 상호 주파수 간섭을 최소화하기 위하여 6종의 SAW 필터로 구성된 수신기 구조가 적용되었다. 시스템 요구사항의 만족 여부를 확인하기 위해 AWR 시뮬레이션 툴을 이용하였다.