• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.49-63
• /
• 2003

Recently, two international standard organizations, ISO and OGC, have done the work of standardization for GIS. Current standardization work for providing interoperability among GIS DB focuses on the design of open interfaces. But, this work has not considered procedures and methods for designing GIS DB. Eventually, GIS DB has its own model. When we share the data by open interface among heterogeneous GIS DB, differences between models result in the loss of information. Our aim in this paper is to revise the design guidelines for geographic information databases in order to make consistent spatial data models, logical structures, and semantic structure of populated geographical databases. In details, we propose standard guidelines which convert ISO abstract schema into relation model, object-relation model, object-centered model, and geometry-centered model. Furthermore, we provide sample models for applying these guidelines in commercial GIS S/Ws. Building GIS DB based on design guidelines proposed in the paper has the following advantages: the interoperability among databases, the standardization of schema definitions, and the catalogue of GIS databases through.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2018

It is ten years since the Good Agricultural Practices (GAP) certification system was implemented in Korea, and the government aims to acquire GAP certification up to 25% of the total agricultural areas by 2022. As of the end of 2017, 6.3% of the total cultivated area and 8.1% of the total farm households were certified, which is slower than expected. The purpose of this study was to investigate the causes of the GAP accreditation through the surveys and on site inspections of the GAP certified farmers and to propose the development plans according to the problems analysis of the current system in order to expand the GAP certification. Certified farmers recognized the need for agricultural safety and hygiene, but there were a lot of nonconformities regarding practical practices. This is due to the ambiguity of the certification standards and the wrong ways in the training method for the producers. GAP certification is slow to expand to farmers and low consumer awareness is considered a structural problem of GAP certification system, and improvement measures are needed accordingly. It is necessary to convert the state-led GAP certification system into a state-led private certification system. It is necessary for the government to focus on policy, research and follow-up management. In addition, it is necessary to establish a separate organization in the form of a contribution organization for the certification, education, and public relations. In addition, long-term plan must be established and systematically carried out. It is necessary to integrate too many certification agencies compared to the farming scale of Korea, and it is necessary to realize the application fee for realizing the financial independence of the certification body and correct certification work. In addition, inspector qualification standards should be strengthened and training system should be improved to nurture high quality inspectors. Simplified certification standards based on statutes need to be subdivided into practical action plans. In order to improve the GAP certification system, it is necessary to have a discussion through a committee composed of specialists from industry and academia, and it will be possible to contribute to the safety of the food of the people through the production of safe by drawing concrete development plans.

• Land and Housing Review
• /
• v.5 no.1
• /
• pp.53-56
• /
• 2014

Hong Kong, a well-known metropolis characterized by skyscrapers on both sides of the Victoria Harbour, consists mainly of 3 parts, namely the Hong Kong Island, the Kowloon peninsula and the New Territories (N.T.) which is the land area north of Kowloon plus a number of outlying islands. Located in the N.T. are all the new towns, market towns; and in the plains and valleys lie scattered village houses of not more than 3 storeys within the confines of well-defined village. These village houses are governed by a rural housing policy that could be traced back to the very beginning of the former British administration in the N.T. By the Convention of Peking of 1898, the N.T., comprising the massive land area north of Kowloon up to Shenzhen River and 235 islands, was leased to Britain by China for 99 years from 1st July 1898. Soon after occupation, the colonial government conducted a survey of this uncharted territory from 1899 to 1903, and set up a land court to facilitate all land registration work and to resolve disputed claims. By 1905, the Block Crown Leases with Schedule of Lessees and details of the lots, each with a copy of the lot index plan (Demarcation Plan) were executed. Based on the above, Crown rent rolls were prepared for record and rent collection purposes. All grants of land thereafter are known as New Grant lots. After completion and execution of the Block Crown Lease in 1905, N.T. villagers had to purchase village house lots by means of Restricted Village Auctions; and Building Licences were issued to convert private agricultural land for building purposes but gradually replaced by Land Exchanges (i.e. to surrender agricultural land for the re-grant of building land) from the early 1960's until introduction of the current Small House Policy in October 1972. It was not until the current New Territories Small House Policy came into effect in December 1972 that the Land Authority can make direct grant of government land or approve the conversion of self-owned agricultural land to allow indigenous villagers to build houses within the village environs under concessionary terms. Such houses are currently restricted to 700 square feet in area and three storeys with a maximum height of 27 feet. An indigenous villager is a male descendent of a villager who was the resident of a recognized village already existing in 1898. Each villager is only allowed one concessionary grant in his lifetime. Upon return of Hong Kong to the People's Republic of China on July 1st, 1997, the traditional rights of indigenous villagers are protected under Article 40 of the Basic Law (a mini-constitution of the Hong Kong Special Administrative Region). Also all N.T. leases have been extended for 50 years up to 2047. Owing to the escalating demand and spiral landed property prices in recent years, abuse of the N.T. Small House Policy has been reported in some areas and is a concern in some quarters. The Hong Kong Institute of Land Administration attempts to study the history that leads to the current rural housing policy in the New Territories with particular emphasis on the small house policy, hoping that some light can be shed on the "way forward" for such a controversial policy.

• The Korean Journal of Zoology
• /
• v.39 no.3
• /
• pp.273-281
• /
• 1996

Previously, we have proposed a two-cell type model for follicular steroidogenesis inamphibians with Rana nigromacu lota. Present experiments were carried out to ascertain whether the model Is applicable to R. dybowskii. The role of theca layer were also reassessed by using granulosa cell-free pure theca layer (P-THEP). Theca/epithelium (THEP) layers, P-THEP layers, and granulosa cell enclosed-oocytes () were obtained from ovarian follicles of R. dybowskii by microdissection. Intact follicles (IFs) and different types of tissues were cultured for 6 hour in amphibian Ringer's m the presence or absence of FPII (0.05 gland/mi) or various steroid precursor (100 ng/ml). The amounts of product steroids converted by the components were measured by RIA. Exogenously added pregnenolone (P5) resulted in a marked increase in progesterone (P$_4$) by GCEOs (2143 pg/follicle) and IFs (2346 pg/follicle) but a smaller increase in P4 by THEP layer (495 pg/follicle). Addition of P$_4$ increased 17 a-hydroxyprogesterone (17 $\alpha$-OHP$_4$) levels by GCEOs (1118 pg/follicle) and IFs (1333 pg/follicle) but less by THEP layer (290 pg/follicle). However, much less amounts of P$_4$ or 17 $\alpha$-OHP$_4$ were producad by P-THEP layers than THEP in the presence of P5. Exogenous 1 7$\alpha$-OIIP$_4$ increased androstenedione (AD) levels by GCEOs (1415 pg/follicle) and IFs (561 pg/follicle) but not by THEP layers. In contrast, addition of AD resulted m a marked increase in testosterone (T) levels by TIIEP (2594 pg/follicle) and IFs (2223 pg/follide) but much less by GCEOs (339 pg/follicle). Exogenous T increased estradiol (E$_2$) levels by GCEOs (551pg/follicle) and IFs (887 pg/follicle), but not by THEP layer (<10 pg/follicle). Without addition of FPH or steroid precursors, very low or nondetectable levels of steroids were produced (< 20 pg/follicle) by all the types of follicular components examined. The data presented here indicate that the two-cell type model based on the study with R. nigromacu Iota is applicable to R. dybowskii and also suggest that the minor pathway, which convert P5 to 17$\alpha$-OHP$_4$, is not present in theca layer.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.149-159
• /
• 2016

Purpose : To evaluate the usefulness of the breathing exercise,we analyzed the change in the RPM signal and the diaphragm imagebefore 4D respiratory gated radiation therapy planning of lung cancer patients. Materials and Methods : The breathing training was enforced on 11 patients getting the 4D respiratory gated radiation therapy from April, 2016 until August. At the same time, RPM signal and diaphragm image was obtained respiration training total three steps in step 1 signal acquisition of free-breathing state, 2 steps respiratory signal acquisition through the guide of the respiratory signal, 3 steps, won the regular respiration signal to the description and repeat training. And then, acquired the minimum value, maximum value, average value, and a standard deviation of the inspiration and expiration in RPM signal and diaphragm image in each steps. Were normalized by the value of the step 1, to convert the 2,3 steps to the other distribution ratio (%), by evaluating the change in the interior of the respiratory motion of the patient, it was evaluated breathing exercise usefulness of each patient. Results : The mean value and the standard deviation of each step were obtained with the procedure 1 of the RPM signal and the diaphragm amplitude as a 100% reference. In the RPM signal, the amplitudes and standard deviations of four patients (36.4%, eleven) decreased by 18.1%, 27.6% on average in 3 steps, and 2 patients (18.2%, 11 people) had standard deviation, It decreased by an average of 36.5%. Meanwhile, the other four patients (36.4%, eleven) decreased by an average of only amplitude 13.1%. In Step 3, the amplitude of the diaphragm image decreased by 30% on average of 9 patients (81.8%, 11 people), and the average of 2 patients (18.2%, 11 people) increased by 7.3%. However, the amplitudes of RPM signals and diaphragm image in 3steps were reduced by 52.6% and 42.1% on average from all patients, respectively, compared to the 2 steps. Relationship between RPM signal and diaphragm image amplitude difference was consistent with patterns of movement 1, 2 and 3steps, respectively, except for No. 2 No. 10 patients. Conclusion : It is possible to induce an optimized respiratory cycle when respiratory training is done. By conducting respiratory training before treatment, it was possible to expect the effect of predicting the movement of the lung which could control the patient's respiration. Ultimately, it can be said that breathing exercises are useful because it is possible to minimize the systematic error of radiotherapy, expect more accurate treatment. In this study, it is limited to research analyzed based on data on respiratory training before treatment, and it will be necessary to verify with the actual CT plan and the data acquired during treatment in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.420-430
• /
• 2005

This study was performed to change the hydrophilic $NH_4Y$-zeolite to the hydrophobic one for removal of VOCs by removing the $Al^{3+}$ in the zeolite-structure to increase the Si/Al ratio, for which the three pelleted $NH_4Y$-zeolite samples were contacted separately with the steam of $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$, respectively, in a stainless steel column for 4 hours. Then extraction of the ex-structure aluminum of the hydrolyzed zeolites with the nitric acids of 0.25, 0.50, 0.75, and 0.10 M at $90^{\circ}C$ in 500 mL-flasks, respectively, according to steam temperature were followed. XRD analysises of the dealuminated zeolites showed that the peaks of the zeolites that had been hydrolyzed with the steams of both $500^{\circ}C$ and $600^{\circ}C$ are distorted more with the increase of the concentration of nitric acid used for extraction of the ex-structure aluminums, however, those hydrolyzed with steam of $400^{\circ}C$ became amorphous phase when treated with the all nitric acids of four concentrations. Also the EDX analysises showed that the BET surface areas and TPVS of the zeolites that had been hydrolyzed with the steam of $600^{\circ}C$ were increased with the concentration of the nitric acid when the nitric acids of 0.25 M and 0.5 M had been used but decreased when the nitric acids of 0.75 M and 1.0 M had been used. These results led to the conclusion that both the $600^{\circ}C$ and $500^{\circ}C$-steam and the 0.5 M-nitric acid are appropriate to change the hydrophilic $NH_4Y$-zeolites to the hydrophobic one, which were proven by the measurement of the benzene and tolune-adsorbing capacities showing the same trend as the BET surface area and TPV The Si/Al ratios and water-adsorbing capacities of the dealuminated zeolites were increased and decreased, respectively, with the concentration of the nitric acids so that it showed that the hydrophobicity is increased.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.9
• /
• pp.662-669
• /
• 2011

This study was conducted to biologically convert methane into methanol. Methane contained in biogas was bio-catalytically oxidized by methane monooxygenase (MMO) of methanotrophs, while methanol conversion was observed by inhibiting methanol dehydrogenase (MDH) using MDH activity inhibitors such as phosphate, NaCl, $NH_4Cl$, and EDTA. The degree of methane oxidation by methanotrophs was the most highly accomplished as 0.56 mmol for the condition at $35^{\circ}C$ and pH 7 under 0.4 (v/v%) of biogas ($CH_4$ 50%, $CO_2$ 50%) / Air ratio. By the inhibition of 40 mM of phosphate, 50 mM of NaCl, 40 mM of $NH_4Cl$ and $150{\mu}m$ of EDTA, methane oxidation rate could achieve more than 80% regardless of type of inhibitors. In the meantime, addition of 40 mM of phosphate, 100 mM of NaCl, 40 mM of $NH_4Cl$ and $50{\mu}m$ of EDTA each led to generating the highest amount of methanol, i.e, 0.71, 0.60, 0.66, and 0.66 mmol when 1.3, 0.67, 0.74, and 1.3 mmol of methane was each concurrently consumed. At that time, methanol conversion rate was 54.7, 89.9, 89.6, and 47.8% respectively, and maximum methanol production rate was $7.4{\mu}mol/mg{\cdot}h$. From this, it was decided that the methanol production could be maximized as 89.9% when MDH activity was specifically inhibited into the typical level of 35% for the inhibitor of concern.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.255-263
• /
• 2006

Vol-oxidizer is a device to convert $UO_2$ pellets into $U_3O_8$ powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the $U_3O_8$ measuring the temperature distribution, and the volume of $UO_2$ and $U_3O_8$. We manufactured the new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets, and then analyzed the characteristics of the $U_3O_8$ powder for the verification. The experimental results show that the permeability of the $U_3O_8$ throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is $40{\mu}m$. The capacities of new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets were agree well with the predictions of design model.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.212-218
• /
• 1986

Proteins in Korean rapeseeds, as in many other plantseeds, are usually bound to phytate molecules. These phytate-bound proteins are of little value as foodstuffs because of their poor solubility in digestive systems. Therefore it is necessary to remove phytates from proteins in order to convert these proteins io a useful foodstuff. In the work, an efficient procedure for removal of phytates from defatted Korean rapeseed was found. The influence of pH on the solubility of protein and phytate of rapeseed flour showed that the former was the lowest at pH 5.0 and began to increase as pH further raised. Meanwhile, the latter was the highest at pH 6.0, however, it was decreased abruptly at alkaline pH, especially to content of 1.3% at pH 11.5. The solubility cf protein was relatively high in NaCl aqueous solution at $pH\;6.0{\sim}8.0$, and did not male any noticeable difference depending on NaCl concentration. On the other hand, the solubility of phytate was high at pH of below 6.0 showing an abrupt decrease at pH of above 6.0. The solubility of protein in $CaCl_2$ aqueous solution was highest at $pH\;6.0{\sim}8.0$, however, there was no significant change at the whole range of tested pH of the solution. A maximum solubility of phytate was shown at $pH\;3.0{\sim}4.0$. And it was decreased abruptly at a higher pH of the above range and also decreased at a lower pH with higher $CaCl_2$ concentration. The solubility of phytate in $Na_2SO_3$ aqueous solution was highest at $pH\;5.0{\sim}8.0$. As the concentration goes up the maximum value of solubility was found to move to higher pHs. Depending on the concentration of $Na_2SO_3$, the decreasing pattern was changed in an alkaline solution. The solubility of phytate in the solution containing low concentration of $Ca^{2+}$ ion was low in all treatments at pH of above 7.0 and showed the maximum value at low pH as $Ca^{2+}$ ion concentration increases. The solubility of protein at pH 11.5 showed the highest value in $1mM\;Ca^{2+}$ ion solution.