• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.199-206
• /
• 2012

Attempt to use as a marker of natural objects directly in the real world, but there is a way to use the accelerometer of the smartphone, to convert the Frontal-View virtual, because it asks only the pitch of the camera, from the side there is a drawback that can not be converted to images. The proposed algorithm, to obtain the rotation matrix of axis 3 pitch, roll, yaw, we set the reference point of the yaw of the target image. Then, to compensate for the rotation matrix to determine Myon'inji any floor, wall, the ceiling of the target image. Finally, to obtain the homography matrix for obtaining the Frontal-View to account for the difference between the gyro sensor coordinate system and image coordinate system, so we can get the Frontal-View from the captured images through the projection transformation was designed. Was tested to convert Frontal-View the picture was taken in an environment smartphone environment surrounding floor, walls and ceiling in order to evaluate the conversion program Frontal-View has been implemented, in this paper, design and The conversion algorithm implementation, it was confirmed that to convert a regular basis Frontal-View footage taken from multiple angles.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.4
• /
• pp.164-168
• /
• 2001

In this paper voltage source FEA for hysteresis motor considering magnetic hysteresis characteristics is presented. The Preisach model is used as a hysteresis model. System matrix whose unknown variables are vector potentials and currents is formulated for voltage source. The stiffness matrix is maintained constant by using M-iteration method. Therefore the calculation time and efforts are reduced with Choleski direct method. Current waveform can be calculated for arbitrary voltage vaveform considering hysteresis effects.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.519-524
• /
• 2002

This paper presents a soft-switching technique of single-stage power conversion Matrix Converter of AC-AC converters. Conventional hard-switching method is limited to operate at low switching frequency due to increased switching loss. In this paper, by additional auxiliary switch circuits, it is shown that the main switch of the matrix converter operate as a zero-voltage switches, and the auxiliary switch operate as a zero current switch. Finally, the soft-switching technique with auxiliary switches is compared with conventional hard-switching technique, and Is analyzed by simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.93-101
• /
• 2010

In this paper we generate Gold-sequence by using M-sequence which is made by two primitive polynomial of GF(2). Generally M-sequence is generated by linear feedback shift register code generator. Here we show that this matrix of appropriate permutation has Hadamard matrix property. This matrix proves that Gold-sequence through two M-sequence and additive matrix of one column has one of major properties of Hadamard matrix, orthogonal. and this matrix show another property that multiplication with one matrix and transpose matrix of this matrix have the result of unit matrix. Also M-sequence which is made by linear feedback shift register gets Hadamard matrix property mentioned above by adding matrices of one column and one row. And high-speed conversion is possible through L-matrix and the S-matrix.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.3
• /
• pp.158-168
• /
• 1993

For the conversion of WAD to NADP, Immobilized Brevibacterium ammoniagenes cells with NAD kinase was coupled with ATP-generating system by acetate kinase. The membrane permeability of B. ammoniagenes was improved by toluene treatment of cells. The toluene treated B. ammoniagenes cells were immobilized for stable enzyme activity. Partially purified acetate kinase was used in the reaction system. The optimum conditions for the efficient conversion of UAD to WADP by energy-coupled system were investigated. B. ammoniagenes cells treated with toluene for the Improvement of membrane permeability showed 4.5 fold improved permeability in the conversion of NAD to NADP compared with Intact cells. 3% k-carrageenan as the immobilization matrix of B. ammoniagenes showed the best efficiency for the conversion of NAD to NADP The optimum conditions for the WAR to WARP conversion reaction coupled nth ATP-generating system were 10mM acetylphosphate, 5mM ADP 200mM inorganic phosphate, 10mM MgCl2, 250mg/ml Immobilized cells, 49.3mUnit/ml acetate kinase, pH 7.5 and 37$^{\circ}C$. Under the optimum conditions, 72% of 5mM(340mg/ml ) NAD was converted to UADP In 12 hours.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.125-128
• /
• 2006

This paper presents a novel type soft switching PWM power frequency AC-AC converter using bidirectional active switches or single phase utility frequency AC-high frequency AC matrix converter. This converter can directly convert utility frequency AC (UFAC, 50Hz/60Hz) power to high frequency AC (HFAC) power ranging more than 20kHz up to 100kHz. A novel soft switching PWM prototype of high frequency multi-resonant PWM controlled UFAC-HFAC matrix converter using antiparallel one-chip reverse blocking IGBTs manufactured by IXYS corp. is based on the soft switching resonance with asymmetrical duty cycle PWM strategy. This single phase UFAC-HFAC matrix converter has some remarkable features as electrolytic capacitor DC busline linkless topology, unity power factor correction and sine-wave line current shaping, simple configuration with minimum circuit components, high efficiency and downsizing. This series load resonant UFAC-HFAC matrix converter, incorporating bidirectional active power switches is developed and implemented for high efficiency consumer induction heated food cooking appliances in home uses and business-uses. Its operating performances as soft switching operating ranges and high frequency effective power regulation characteristics are illustrated and discussed on the basis of simulation and experimental results.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.74-82
• /
• 2009

This article presents a six sigma project for improving purchase conversion rate in mobile game site. The project was carried out based on DMAIC process. First, a defect rate is defined as low purchase conversion rate. In addition, 60-days purchase data was analyzed and it is shown that the defects level was 2.48 sigma level. In this study, in order to raise the sigma level, six personalization services were used in the mobile game site. Six factors were determined based on FDPM(Functional Deployment Process Map), fishbone chart, linear regression analysis, effort-performance matrix, and so on. The sigma level of defects has improved from 2.48 to 2.93.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.85-88
• /
• 2005

A low-cost and high-speed PDP color inspection system can be constructed by using a CCD camera against a colorimeter. Though the inspection can be done using RGB signals obtained by a camera, it has some difficulty to introduce human color sensitivity. Thus, it is quite desirable to convert the RGB values into the XYZ values that can be compared to the values of a colorimeter. Accordingly, the current study proposes a color conversion method that can analytically calculate the RGB-to-XYZ conversion matrix by utilizing the RGB primaries and the reference white. Experiments on Macbeth colorchecker colors showed that the average color difference between the converted XYZ values of the proposed method and the measured XYZ values of a colorimeter is much below the threshold of distinguishing two adjacent color patches.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.52-57
• /
• 1983

We report a theoretical study on wave propagation in magneto-optic thin-film waveguides. The field distribution and phase velocity of the guided hybrid modes are analyzed in terms of the phase difference of basic system modes and the Faraday rotation of the magneto-optic thin film. Splitting of the phase constant curves due to the F araday rotation is discussed. The present hybridmode analysis leads to a conversion matrix which shows that the distance dependence of the mode conversion in the guide is different from that in the bulk medium.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.294-300
• /
• 1999

The density matrix is solved more rigorously, compared with the third-order pertubation method used in the conventional theory, for a semiconductor laser amplifier. Then the coupled wave equations are derived to explain the wavelength conversion due to the spectral hole burning in the semiconductor optical amplifier. It is shown that our results can explain the effect of saturation of the population density on the electric polarization, which affects the four-wave mixing and wavelength conversion, better than the conventional theroy where the third-order pertubation is used.