• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.159-159
• /
• 2022

Soil represents a substantial component within the global carbon cycle and small changes in the SOC stock may result in large changes of atmospheric CO₂ particularly over tens to hundreds of years. In this study, we aim to (i) evaluate the SOC stock in the topsoil 0 - 15 cm from soil physical and chemical characteristics and (ii) find the correlation of SOC and soil organic matter (SOM) for national-scale in South Korea. First of all, based on the characteristics of the soil to calculate the soil hydraulic properties, SOC stock is the SOC mass per unit area for a given depth. It depends on bulk density (BD-g/cm³), SOC content (%), the depth of topsoil (cm), and gravel content (%). Due to insufficient data on BD observation, we establish a correlation between BD and SOC content, sand content, clay content parameter. Next, we present linear and non-linear regression models of BD and the interrelationship between SOC and SOM using a linear regression model and determine the conversion factor for them, comparing with Van Bemmelen 1890's factor value for the country scale. The results obtained, helps managers come up with suitable solutions to conserve land resources.

• 임산에너지
• /
• 24권2호
• /
• pp.10-15
• /
• 2005

본 연구는 기후변화협약에 대응하기 위해 우리나라의 산지전용에 따른 탄소배출량을 측정할 목적으로 수행되었다. 산지전용자료는 2000년부터 2004년까지 최근 5년간 산림기본통계자료에서 추출하였으며, 임목바이오매스 탄소배출량은 임상별 바이오매스 확장계수와 탄소전환계수를 이용하였다. 최근 5년동안 산지전용면적은 연평균 약 7.2천ha가 타용도로 전용되었으며, 임목축적은 연평균 약 212천$m^3$이 벌채되었다. 최근 5년간 산지전용에 따른 임목바이오매스 총탄소배출량은 연평균 105천tC 배출한 것으로 나타났으며, 임상별 임목바이오매스 탄소배출량은 침엽수림이 54천tC, 활엽수림이 51천tC 배출한 것으로 나타났다. 최근 5년간 산지전용에 따른 ha 당 탄소배출량은 연평균 약 14.4tC/ha으로 나타났으며, 임상별로는 침엽수림이 약 13.3tC/ha, 활엽수림이 18.5tC/ha로 나타났다. 따라서 활엽수림이 단위면적당 탄소를 더 많이 배출하는 것으로 나타났다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.387-400
• /
• 2017

A new junction-splitting based SAR ADC with a redundant searching capacitor array structure in $0.13{\mu}m$ CMOS process to alleviate capacitor mismatch effects, is presented. The normalized average power has a factor of 0.35 to the conventional SAR ADC at 10-bit conversion accuracy. Statistical experiments show the number of missing codes resulting from the mismatch reduces by 95% for 3% unit-capacitor mismatch ratio, while keeping the conversion energy to that of the conventional JS capacitor array.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.955-960
• /
• 2001

In order to develop an efficient turbine for wave energy conversion suitable for actual ocean conditions, a new type of the air turbine with staggered blades has been investigated experimentally. Experiments have been carried out under steady flow conditions. Both the running and starting characteristics under sinusoidally oscillating flow conditions are simulated by a CFD method using a quasi-steady analysis. It is known that the air turbine with staggered blades gives a better performance compared with conventional Wells turbine, and a proper design factor of the air turbine is discussed for the setting angle of the rotor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.5-6
• /
• 2006

There are typically applied on both rear and front sides of electrical contacts to the solar cell. The front contact formation is particularly sensitive to many parameters. Accordingly patterning of front grid line is an important factor of solar cells. This paper describe the electrical conversion efficiency, inclusive of shading loss that gives various spacing between front metal grid lines. In experiments with variation of spacing. It was verified that the wide spacing of grid fingers could increase the series resistance, also the narrow spacing of grid fingers also implies a grid with a higher density of grid fingers. The sunlight of incidence was more of reflection by grid fingers. In result, the short circuit current, which contribute to conversion efficiency was decreased, because maximum power input was reduced and increase the series resistance.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.575-581
• /
• 2009

In this paper two modes of operating a wound rotor induction machine as a generator at sub-and super-synchronous speeds in wind energy conversion systems are investigated. In the first mode, known as double fed induction generator (DFIG), the rotor circuit is fed from the ac mains via a controlled rectifier and a forced commutated inverter. Adjusting the applied rotor voltage magnitude and phase leads to machine operation as a generator at sub-synchronous speeds. In the second mode, the machine is operated in a slip recovery scheme where the slip energy is fed back to the ac mains via a rectifier and line commutated inverter. This mode is described as double output induction generator (DOIG) leading to increase the efficiency of the wind-to electrical energy conversion system. Simulated results of both modes are presented. Experimental verification of the simulated results are presented for the DOIG mode of operation, showing larger amount of power captured and better power factor when compared to conventional induction generators.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.21-27
• /
• 2001

This paper describes numerical analysis of the impulse turbine with fixed guide vanes, a high performance bi-directional air turbine having simple structure for wave energy conversion. The numerical analysis of the 2-dimensional incompressible viscous flow based on the full Reynold-averaged Navier-Stokes equations which was made to investigate the internal flow behavior. Numerical results are compared with experimental data obtained by T.Setoguchi laboratory. As a result, as suitable choice of design factor has been clarified with the understanding of the internal flow from the numerical analysis.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.227-228
• /
• 2012

In interfaces between carbon black or Pt and FTO glass in dye-sensitized solar cell counter electrodes, a marginal resistant channel for electrons, we tried to improve the connection by modifying the sintering process. A stepwise sintering process for carbon black and Pt counter electrodes was applied and its effect on power conversion efficiency was studied. Power conversion efficiencies of built-in DSSC made by a one-step sintering process with carbon black and Pt counter electrodes were about 5.01% and 5.02%, respectively. Cells made with the stepwise sintering process were 5.96% and 6.21%, respectively, indicating an 20% improvement. Fill factor (FF) increased, and it was them main reason for the power conversion efficiency improvement. Step wise sintering increased the adhesion of the interface and reduced the film thickness and surface roughness. As a result, the resistivity of the counter electrode and EIS impedance of DSSCs decreased.

• 한국지반공학회논문집
• /
• 제31권7호
• /
• pp.5-12
• /
• 2015

본 연구에서는 국내 하천 정비사업 중 수중골재 채취 및 반출 과정에서 발생할 수 있는 준설토의 손실량을 예측하기 위해 실내에서 소형토조를 이용하여 토사 퇴적실험을 실시하였다. 토사 퇴적실험에 사용한 토사는 낙동강 유역에서 채취한 0.075-0.85mm 사이의 가는 모래, 0.85-2mm 사이의 굵은 모래, 그리고 4.75-5.6mm 사이의 자갈로 대기중 또는 수중으로 자유낙하방식으로 퇴적시켰다. 다양한 퇴적조건에 따른 토사의 건조단위중량 변화를 분석하였으며, 다양한 종류의 수중 토사를 육상으로 준설하고 적치할 경우에 예상되는 토량의 변화 또는 손실량을 토량환산계수 C값으로 예측하고자 하였다. 본 토사 퇴적실험으로부터 계산된 C값은 가는 모래 0.91, 굵은 모래 0.96, 자갈 0.91이었다. 한편 토사 내 간극수의 배수로 발생하는 유효응력 증가로 인한 단위중량 변화도 고려하기 위해 수중에서 퇴적된 토사를 배수시킨 다음 건조단위중량의 변화를 계산하고 이를 바탕으로 토량환산계수를 수정하였다. 배수로 인한 건조단위중량의 증가율은 5-12% 정도였으며, 이를 고려할 경우 토량환산계수 C값은 가는 모래 0.81, 굵은 모래 0.92, 자갈 0.82로 4-12% 정도 감소하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.65-72
• /
• 2004

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The input active power factor correction (APFC) circuits can be implemented in either the two-stage approach or the single-stage approach. The two-stage approach can be classified into boost type PFC circuit and dc/dc converter. The power factor correction circuit with a boost converter used as an input power source is studied in this paper. In a boost power factor correction circuit there are two feedback control loops, which are a current feedback loop and a voltage feedback loop. In this paper, the regulation performance of output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of designed boost PFC circuit is confirmed by MATLAB simulation and experimental results.