• Korean Journal of Social Welfare Studies
• /
• no.37
• /
• pp.319-344
• /
• 2008

The Purpose of this study is to observe the existence of welfare attitude split between welfare regimes clique and to explore the effect of institutional(regime) characteristics on welfare attitude. And Second purpose is to find the characteristics of structure of welfare attitude and then to clarify the characteristics of welfare attitude in Korea. This work contribute to find the point of solidarity and split and to work out the strategical clues for constructing pro-welfare politics. To compare the attitude on the state responsibility about the welfare, Sweden, France, US, and Korea is selected. And the effect of sex, age, education level, income class, and labor status which are abstracted from existing welfare state comparative study are analyzed. The result show the difference in welfare attitude score between countries. The welfare attitude score is Sweden, France and US in order. the Score in Korea is lowest. In the case of the effect structure of welfare attitude between countries, there are no differences between Sweden and France. But the specific characteristics in US and Korea, are observed. And the effect structure of sex, class, labor status is equal in Sweden, France, and US. That is, women, people in low class, and people in low labor status more emphasize the state responsibility on the welfare. But the effect structure of age of US is different comparing other countries. In US, the old age is tend to less support the state responsibility. The education level operate as the effect factor in only US. And Korea show the different effect structure on the welfare attitude. This understanding about structure of welfare consciousness become the basis to construct the strategy for welfare state by proposing the point of consensus and conflict to conversion of welfare paradigm.

• Clean Technology
• /
• v.20 no.3
• /
• pp.306-313
• /
• 2014

Nanoporous $TiO_2$ films are commonly used as working electrodes in dye-sensitized solar cells (DSSCs). So far, there have been attempts to synthesize films with various $TiO_2$ nanostructures to increase the power-conversion efficiency. In this work, vertically aligned rutile $TiO_2$ nanorods were grown on fluorinated tin oxide (FTO) glass by hydrothermal synthesis, followed by deposition of an anatase $TiO_2$ film. This new method of anatase $TiO_2$ growth avoided the use of a seed layer that is usually required in hydrothermal synthesis of $TiO_2$ electrodes. The dense anatase $TiO_2$ layer was designed to behave as the electron-generating layer, while the less dense rutile nanorods acted as electron-transfer pathwaysto the FTO glass. In order to facilitate the electron transfer, the rutile phase nanorods were treated with a $TiCl_4$ solution so that the nanorods were coated with the anatase $TiO_2$ film after heat treatment. Compared to the electrode consisting of only rutile $TiO_2$, the power-conversion efficiency of the rutile-anatase hybrid $TiO_2$ electrode was found to be much higher. The total thickness of the rutile-anatase hybrid $TiO_2$ structures were around $4.5-5.0{\mu}m$, and the highest power efficiency of the cell assembled with the structured $TiO_2$ electrode was around 3.94%.

• Journal of Applied Biological Chemistry
• /
• v.61 no.3
• /
• pp.245-255
• /
• 2018

The research was aimed to analyze the functional constituents (GABA and isoflavone), radical (2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and hydroxyl) scavenging activities and enzyme (${\alpha}-glucosidase$ and lipase) inhibitory effects of soypowder milk (SPM) and fermented soy-powder milk (FSPM) with varied Lactobacillus brevis. Ten ${\gamma}-aminobutyric$ acid (GABA) producing lactic acid bacteria that showed 96-99% similarity with L. brevis, according to 16S rRNA gene sequence analysis, were isolated from fermented kimchi. The conversion rates of GABA were obtained 66.96-93.51, 63.76-84.58, and 57.05-69.75% in monosodium glutamate, gluten and soy protein, respectively. The levels of pH and glutamic acid of FSPM were found lower than those of SPM, but the acidity and GABA contents were higher. The GABA conversion rate of FSPM with BMK484 strain was attained the highest 69.97%. The contents of isoflavone glycoside ($1290.93{\mu}g/g$) was higher in SPM, but the content of isoflavone aglycone ($287.27-501.9{\mu}g/g$) was higher in FSPM. The levels of isoflavone aglycone such as daidzein, glycitein and genistein, were found as the highest 240.2, 61.24 and $200.45{\mu}g/g$, respectively, when FSPM was made with BMK484 strain. The DPPH, ABTS and hydroxyl radical scavenging and ${\alpha}-glucosidase$ and pancreatic lipase inhibitory activities of FSPM made with BMK484 strain were the relatively higher 60.31, 88.10, 61.25, 52.71, and 39.37%, respectively. Therefore, the L. brevis can be used as a material capable of simultaneously enhanced GABA and isoflavone aglycone in FSPM.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.252-259
• /
• 2005

Single crystal $CuGaSe_2$ layers were grown on thoroughly etched semi-insulating CaAs(100) substrate at $450^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $CuGaSe_2$ source at $610^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence (PL) and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $CuGaSe_2$ thin films measured with Hall effect by Van der Pauw method are $4.87{\times}10^{17}cm^{-3}$ and $129cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.7998eV-(8.7489{\times}10^{-4}eV/K)T^2/(T+335K)$. The voltage, current density of maxiumun power, fill factor, and conversion, efficiency of $n-CdS/p-CuGaSe_2$, heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.41 V, $21.8mA/cm^2$, 0.75 and 11.17%, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.6
• /
• pp.761-773
• /
• 2000

Eighteen growing male Murrah buffalo (Bubalus bubalis) calves were divided into three groups consisting of six animals each and fed three urea ammoniated wheat straw (UAS) -based rations supplemented with concentrate mixtures (roughage: concentrate ratio 58:42) containing deoiled ground nut cake, GNC (8%), formaldehyde treated GNC (8%) or fish meal (8%) to undertake comparative evaluation of these rations in terms of their $CH_4$ production and growth (285 d duration) potential. A digestibility trial (10 d duration) was followed by a comparative calorimetric study in respiration chamber. Dry matter (DM) intake (84.3 to $89.3g/kg\;W^{0.75}d^{-1}$) did not differ between treatments. The digestibility coefficient of DM, organic matter (OM), crude protein (CP), neutral and acid detergent fiber did not differ significantly in different diets. Urinary energy loss as a percent of gross energy (GE) was not affected by diets. Average values of $CH_4$ production were 84.3, 77.6 and 99.1 g/d and $CH_4$ energy losses as percent of gross energy were 5.7, 5.2 and 6.1 percent on .GNC, formaldehyde treated GNC and fishmeal, respectively, and did not differ significantly. When expressed per unit of digestible OM intake, $CH_4$ production (g) was lower (p<0.05) on formaldehyde treated GNC (30.6) than on untreated GNC (30.6) and fish meal (31.9). Total ME intake and heat production were similar and hence the energy balances on different diets were similar. Nutritive value of rations in terms of digestible CP and ME were similar. Average daily gain calculated on the basis of regression of fortnights on cumulative liveweight gain in calves fed on concentrate containing unprotected GNC, protected GNC and fish meal were 437.1, 483.9 and 481.6 g, respectively. This indicated that the intake of energy was sufficient to meet the requirement of calves growing at 400 g per d. However, CP intake was around 150% of the stipulated standard (Kearl, 1982). Feed conversion ratios on unprotected GNC, protected GNC and fish meal were 11.60, 11.10 and 10.4 respectively. It was concluded that because significantly (p<0.05) low $CH_4$ is produced on protected GNC (8%), it is very good and sustainable protein source in comparison to poor quality fish meal and untreated GNC to be used in concentrate mixture for supplementing UAS-based diets.

• Clean Technology
• /
• v.21 no.3
• /
• pp.200-206
• /
• 2015

In order to investigate the effect of cerium oxide addition, Cu-ZnO-CeO₂ catalysts were prepared using co-precipitation method for water gas shift (WGS) reaction. A series of Cu-ZnO-CeO₂ catalyst with fixed Cu Content (50 wt%, calculated as CuO) and a given ceria content (e.g., 0, 5, 10, 20, 30, 40 wt%, calculated as CeO₂) were tested for catalytic activity at a GHSV of 95,541 h^-1, and a temperature range of 200 to 400 ℃. Cu-ZnO-CeO₂ catalysts were characterized by using BET, SEM, XRD, H₂-TPR, and XPS analysis. Varying composition of Cu-ZnO-CeO₂ catlysts led the difference characteristics such as Cu dispersion, and binding energy. The optimum 10 wt% doping of cerium facilitated catalyst reduction at lower temperature and improved the catalyst performance greatly in terms of CO conversion. Cerium oxide added catalyst showed enhanced activities at higher temperature when it compared with the catalyst without cerium oxide. Consequently, ceria addition of optimal composition leads to enhanced catalytic activity which is attributed to enhanced Cu dispersion, lower binding energy, and hindered Cu metal agglomeration.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.371-377
• /
• 2017

General phantom for practical X-ray photography Practical phantom is an indispensable textbook for radiology, but it is difficult for existing commercially available phantom to be equipped with various kinds of phantom because it is an expensive import. Using 3D printing technology, I would like to make the general phantom for practical X-ray photography less expensive and easier. We would like to use a skeleton model that was produced based on CT image data using a 3D printer of FDM (Fused Deposition Modeling) method as a phantom for general X-ray imaging. 3D slicer 4.7.0 program is used to convert CT DICOM image data into STL file, convert it to G-code conversion process, output it to 3D printer, and create skeleton model. The phantom of the completed phantom was photographed by X - ray and CT, and compared with actual medical images and phantoms on the market, there was a detailed difference between actual medical images and bone density, but it could be utilized as a practical phantom. 3D phonemes that can be used for general X-ray practice can be manufactured at low cost by utilizing 3D printers which are low cost and distributed and free 3D slicer program for research. According to the future diversification and research of 3D printing technology, it will be possible to apply to various fields such as health education and medical service.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2016

The purpose of this study was to suggest the improvement of the Mountainous Landscape Impact Review(MLIR) system for the conservation and eco-friendly use of mountain scenery. In order to understand the status of the MLIR system, a comparative analysis was conducted of the MLIR official guidelines and the 100 MLIR reports submitted to the Korea Forest Service from 2011 to 2013. In addition, an Importance-Performance Analysis(IPA) was conducted to take into account stakeholder opinions and to determine the first priorities to be improved upon in operation and functions of the MLIR system. The results of the IPA in evaluating the MLIR system showed that the components in the MLIR system that should be primarily improved are mountainous landscape resource inventory, objective and quantitative selection of viewpoints, and a checklist for examining the damage expected in mountainous lands. To Revitalize the Mountainous Landscape Impact Review system, the professional knowledge and experience of the stakeholders should be enhanced by education and training in the MLIR system over the short-term, while the effective functioning of the MLIR system should be reinforced by differentiation and connectivity of the MLIR system with similar institutions, and by emphasizing the uniqueness and properties of mountainous landscapes over the long-term.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.955-960
• /
• 2006

Catalytic decomposition over HZSM-5 was carried out in semi-batch reactor to recover gasoline from waste plastics(HDPE). To enhance the liquid yield with a molecule range of gasoline, the properties of catalytic decomposition were investigated over a commercial Si/ZSM-5 catalyst and HZSM-5 catalysts modified with P and Mg. Optimum loadings of P and Mg on HZSM-5 were 0.5 wt% and 2.0 wt%, respectively, based on conversion and liquid yield. $NH_3-TPD$ profile indicated that strong and weak acid sites totally decreased in P loading on HZSM-5 catalyst, strong acid sites moderately decreased and weak acid sites sharply reduced in Mg loading on HZSM-5 catalyst. In the case of Si/ZSM-5 catalyst, all acid sites almost disappeared, subsequently, catalytic decomposition significantly decreased, and little liquid product was produced. When HZSM-5 catalyst was modified with P and Mg, the carbon distribution of liquid product was shifted to lower carbon number and its all components was within a molecular range of gasoline($C_5-C_{11}$). Especially, over Mg(2.0 wt%)/ZSM-5 catalyst, 55.8% of liquid yield with 100% of a molecular range of gasoline, was obtained at $400^{\circ}C$, suggesting it as a promising catalyst for recycle of waste plastics.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2006

This study was carried out to investigate the effects of dietary Saccharomyces cerevisiae (wild yeast mutant) and Saccharomyces cerevisiae hFeHLC (ferritin containing yeast) and chelated Fe on growth performance and body composition of broiler chicks. A total of 252 (1-day old) 'Ross' broiler chicks were allotted to seven dietary treatments: I) control without iron supplementation, 2) 0.1% wild yeast mutant (YM03), 3) 1.0% wild yeast mutant, 4) 0.1% ferritin containing yeast (YF04), 5) 1.0% ferritin containing yeast, 6) 0.01% chelated Fe and 7) 0.1% chelated Fe. The highest weight gain obtained from broilers fed 0.01% chelated Fe was 2,121g, the lowest weight gain obtained from broilers fed control diet was 2.087g. The growth performance results were not significantly different in weight gain, feed intake and feed conversion ratio of broilers diets containing wild yeast, ferritin containing yeast and chelated Fe supplementation and control diets (P>0.05). The lowest iron content in meat was for control 30.51 mg/dL and the highest Fe content was for 0.1% ferritin containing yeast 41.58 mg/dL, but these were not significantly different (P>0.05).