• 한국수소및신에너지학회논문집
• /
• 제9권3호
• /
• pp.93-100
• /
• 1998

The ortho-para $H_2$ catalytic conversion equipment has been developed to reduce the evaporation loss from stored liquid hydrogen. The ortho-para $H_2$ conversion heat is evaluated at liquid nitrogen temperature. This problem is of particular interest in the design of the ortho-para $H_2$ converter in a hydrogen liquefaction system. The ortho-para $H_2$ conversion equipment consists of a catalytic converter, a precooler, and a liquid nitrogen bath. 30-90 cc of $Fe(OH)_3$ are employed as a catalyst in the present converter. The conversion heat and conversion effectiveness are evaluated when mass flow rate of hydrogen is in the range of 0.05-l.6 g/min. It is found that the ortho-para conversion heat is increased while conversion effectiveness is decreased as the mass flow rate of hydrogen is increased. Both the ortho-para conversion heat and conversion effectiveness are increased with an increase in the amount of the catalyst.

• 한국전문물리치료학회지
• /
• 제5권1호
• /
• pp.51-62
• /
• 1998

Conversion disorder is defined as a specific and enduring sensorimotor dysfunction that contradicts known neurological or musculoskeletal pathology or physical findings. The patient with conversion symptoms unconsciously adopts these symptoms to convert their psychological stress to a physical phenomenon. Conversion disorder often involves the mimicry of organic symptoms similar to those experienced by a relative or an acquaintance. Because conversion symptoms are produced by psychological stress, specific treatment strategy and reinforcement program are needed for treatment. Treatment comprises avoiding unnecessary medical tests and removing symptoms by using graded exercises given by physical therapists. Clinical therapists must maintain a continuous and detailed follow-up to completely recover from conversion symptoms. The goal of treatment is to emphasize health rather than disease, to resolve physical symptoms, and to prevent recurrence. This study looks into the case reports of 4 patients diagnosed with conversion disorder.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.635-636
• /
• 2006

A pulse with modulation(PWM) that keeps a constant angle of dwell and adjust duty ratio is a good method to control a speed of SRM. And a method of one pulse control is proper a operation on range of high speed in SRM for a good energy efficiency. Because PWM method is more safety than one pulse method, conversion of those is best choice according the speed range. So, some algorithm is need for smooth conversion of the mode of control. This paper presents a factor of conversion that proper the conversion of control mode between PWM and one pulse method This factor is from estimation of torque and proper at the variable range of conversion and show the better conversion characteristic than constant factor of conversion.

• 말소리와 음성과학
• /
• 제15권3호
• /
• pp.69-74
• /
• 2023

This study introduces an innovative model for zero-shot voice conversion that utilizes the capabilities of HuBERT. Zero-shot voice conversion models can transform the speech of one speaker to mimic that of another, even when the model has not been exposed to the target speaker's voice during the training phase. Comprising five main components (HuBERT, feature encoder, flow, speaker encoder, and vocoder), the model offers remarkable performance across a range of scenarios. Notably, it excels in the challenging unseen-to-unseen voice-conversion tasks. The effectiveness of the model was assessed based on the mean opinion scores and similarity scores, reflecting high voice quality and similarity to the target speakers. This model demonstrates considerable promise for a range of real-world applications demanding high-quality voice conversion. This study sets a precedent in the exploration of HuBERT-based models for voice conversion, and presents new directions for future research in this domain. Despite its complexities, the robust performance of this model underscores the viability of HuBERT in advancing voice conversion technology, making it a significant contributor to the field.

• ETRI Journal
• /
• 제27권5호
• /
• pp.569-578
• /
• 2005

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on-chip 1 to 6 GHz up-conversion and 1 to 8 GHz down-conversion mixers using a 0.8 mm SiGe hetero-junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up-conversion mixer was implemented on-chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up-conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down-conversion mixer was implemented on-chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down-conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.

• Archives of Plastic Surgery
• /
• 제35권1호
• /
• pp.78-85
• /
• 2008

Purpose: The capsular contracture has been the most common complication of augmentation with breast implant, a side effect quite difficult to treat. The latest trends in the correction of capsular contracture include total capsulectomy or conversion of implant pocket. In this study, in an attempt to correct capsular contracture, the authors performed reoperation which involved capsulectomy through peri-areolar approach and dual-plane conversion. The authors hereby report the clinical results of such correction of capsular contracture and examine the efficacy. Methods: The authors selected 46 patients who were admitted to the clinic from January 2004 to January 2007 (37 months), and performed dual-plane conversion through solely peri-areolar approach. Two types of operation were done: dual-plane conversion from subglandular plane or from submuscular plane. Results: The average follow-up time after conversion to the dual-plane position was 10 months. During the follow-up period, 83.1% of patients recovered from capsular contracture and were Baker class I, and in 10.9% the condition had relapsed into Baker class II or III contracture. Conclusion: This study has proven the effectiveness of the dual-plane conversion operation for correcting established capsular contracture after previous augmentation mammaplasty. In this study, all cases of dual-plane conversion operation was performed through peri-areolar approach, which can prevent the occurrence of visible scar on inframammary fold.

• 대한화학회지
• /
• 제21권6호
• /
• pp.440-444
• /
• 1977

$CS_2$/KOH catalysis를 이용해서 ${\varepsilon}$-caprolactam의 음이온중합을 시키고 percent conversion과 점도를 측정하였다. $80^{\circ}C,\;105^{\circ}C$의 비교적 낮은 온도에서는 $CS_2$/KOH mole ratio가 0.5일때 percent conversion이 가장 높았으며 또 KOH의 당량에 비례하여 percent conversion도 증가하였다. 그러나 $130^{\circ}C,\;155^{\circ}C$로 중합온도를 상승함에 따라 $CS_2$/KOH mole ratio와 KOH양에는 크게 관계없이 높은 percent conversion을 얻을 수 있었다. 그리고 30分 정도의 짧은 중합시간으로도 $80{\%}$ 이상의 높은 percent conversion을 얻을 수 있었다.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.62-68
• /
• 2016

A chromium-free Ce-based conversion coating formed by immersion in a solution containing cerium chloride and nitric acid on AZ31 magnesium alloy has been studied. The effects of acid pickling on the morphology and the corrosion resistance of the cerium conversion coating were investigated. The corrosion resistance of the conversion coating prepared on AZ31 Mg alloy after organic acid pickling was better than that of inorganic acid pickling. The morphology of the conversion-coated layer was observed using optical microscope and SEM. Results show that the conversion coatings are relatively uniform and continuous, with thickness 1.0 to $1.1{\mu}m$. The main elements of the conversion coating of AZ31 Mg alloy are Mg, O, Al, Ce and Zn by EDS analysis. The electrochemical polarization results showed that the Ce-based conversion coating could reduce the corrosion activity of the AZ31 Mg alloy substrates in the presence of chloride ions.

• 한국광학회지
• /
• 제9권4호
• /
• pp.251-257
• /
• 1998

등가렌즈 변환을 렌즈군의 변환으로 확장하였으며, 보다 일반화된 변환법을 개발하였다. 새로운 변환법은 두꺼운 렌즈계에서 바로 두꺼운 렌즈계로의 변환이 가능하다. 등가렌즈 변환을 통하여 얇은 렌즈계는 서로 다른 두께를 가지면서도 근축 광학적 특성이 같고 수차특성이 유사한 여러 개의 두꺼운 렌즈계로 변환 될 수 있다. 예로서 telephoto 렌즈계의 설계변경에 등가렌즈 변환을 적용하여 보았으며, 앞부분 렌즈군의 축상두께를 원설계의 75%로 축소하였다. 등가렌즈 변환을 통하여 얻어진 수정설계의 초점거리는 원설계와 동일하였으며, 축상두께만을 변경시킨 경우에 비하여 수차특성의 변화가 적음을 확인할 수 있었다.

• 한국국방경영분석학회지
• /
• 제33권1호
• /
• pp.75-92
• /
• 2007

세계적으로 각 국가들은 군 현대화를 위해 재정자원의 배분, 연구개발 방향의 재설정, 군수산업의 재구조화, 군부대의 해체, 군사기지의 폐쇄 및 재개발, 잉여무기의 폐기 등 군사부문의 민수전환을 추진하고 있다. 한국 또한 반복되는 국방개혁을 통해 군 현대화를 추진하고 있다. 특히 한국은 장차 주한미군 이전사업, 국방개혁 2020 추진에 따른 부대 통 폐합으로 군사기지의 민수전환 소요가 증가할 것으로 예상된다. 따라서 본 논문에서는 군사기지 민수전환을 성공적으로 실현하기 위한 전략을 도출하기 위해 한국과 미국의 민수전환 사례를 분석하여 군사지기 민수전환을 수행하는 과정의 문제점과 한국에 대한 함의를 찾고자 하였다.