• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2024

This study conducted a measurement method of high temeprature conditions using infrared termography. All objects emit infrared light, and this emissivity has a significant impact on the temperature measurements of infrared thermal imaging (IR) cameras. In order to measure the temperature more accurately with the IR camera, correction equations were derived by measuring the emissivity according to the temperature change of combustible metals in a high-temperature environment. Two combustible metals, Mg and Al, were used to measure emissivity with changing temperature. Each metal was heated, the emissivity was measured by comparing the temperature with IR camera and thermocouples so that the correlation between temperature and emissivity could be anslyzed. As a result of the experiment, the emissivity of the metals increases as the temperature increased. This can be interpreted as a result of increased radiation emission as the thermal movement of internal metal molecules increased.

• Applied Microscopy
• /
• v.52
• /
• pp.10.1-10.15
• /
• 2022

The effect of carbon doping contents on the microstructure, hardness, and corrosion properties of heat-treated AISI steel grades of plain carbon steel was investigated in this study. Various microstructures including coarse ferrite-pearlite, fine ferrite-pearlite, martensite, and bainite were developed by different heat treatments i.e. annealing, normalizing, quenching, and austempering, respectively. The developed microstructures, micro-hardness, and corrosion properties were investigated by a light optical microscope, scanning electron microscope, electromechanical (Vickers Hardness tester), and electrochemical (Gamry Potentiostat) equipment, respectively. The highest corrosion rates were observed in bainitic microstructures (2.68-12.12 mpy), whereas the lowest were found in the fine ferritic-pearlitic microstructures (1.57-6.36 mpy). A direct correlation has been observed between carbon concentration and corrosion rate, i.e. carbon content resulted in an increase in corrosion rate (2.37 mpy for AISI 1020 to 9.67 mpy for AISI 1050 in annealed condition).

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.618-629
• /
• 2020

The purpose of this study was to optimize the fermentation condition of black bean by lactic acid bacteria (LAB) and to evaluate the quality characteristics of fermented black bean. Lactobacillus plantarum SU22 isolated from kimchi was selected as a starter for the fermentation of black bean because the strain exhibited strong antimicrobial activity against pathogenic bacteria and did not produce biogenic amines or a carcinogenic enzyme, β-glucuronidase. Fermentation was performed with broth containing puffed black bean (PBB) inoculated with 1% (v/v) of L. plantarum SU22 at 37℃ for 48h. The viable cell count of LAB was over 9 Log CFU/mL in PBB (20%) broth fermented with L. plantarum SU22. Fermentation of alcalase-treated PBB (20%) broth with L. plantarum SU22 was found to be the optimal condition, increasing viable cell count of LAB up to 10.30 Log CFU/mL. Under the optimal condition, the total polyphenol content (94.02 mg GAE/g) and DPPH radical scavenging activity (92.50%) were significantly increased, compared to non-fermented control (87.74 mg GAE/g, 83.14%).

• Composites Research
• /
• v.31 no.2
• /
• pp.57-62
• /
• 2018

Interfacial and mechanical properties of neat and two sizing agents coated glass fiber (GF)/polydicyclopentadiene (p-DCPD) composites were evaluated at room and low temperatures, $25^{\circ}C$ and $-20^{\circ}C$. Sizing agents of GFs were extracted using acetone and compared via FT-IR. Surface energy and work of adhesion between GFs and p-DCPD were calculated by dynamic contact angle measurement. Mechanical properties of different GFs were determined using single fiber tensile test and interfacial properties of single GF reinforced DCPD strip were determined using cyclic loading tensile test. Mechanical properties of GFs/p-DCPD composites at room and low temperatures were determined using tensile, compressive, and Izod impact tests. Interfacial and mechanical properties were different with sizing agents of GFs and the optimized condition of sizing agent was found.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.35-39
• /
• 2015

This study was presented the small action by the budge sonance function. An estimation of budge sonance function was acquired displacements across all condition with a variation of small action. The budge sonance function was to be indicated to express the flow rate of body motion. Their function was suggested an issue of the action condition by budge sonance. This system was proposed a combination of the body motion and small action. The acquired sonance signal was to render the small action of body motion with budge sonance function. The analysis of budge function was generally realized a variation from displacements on the fast body motion. Budge sonance signal of action that vision condition was acquired to a variation of the $Vi-{\beta}_{AVG}$ with $(-4.954){\pm}(-5.42)$ units, that vestibular condition was acquired to a variation for the $Ve-{\beta}_{AVG}$ with $(-2.288){\pm}0.212$ units, that somatosensory condition was acquired to a variation for the $So-{\beta}_{AVG}$ with $(-0.47){\pm}0.511$ units, that CNS condition was acquired to a variation for the $C-{\beta}_{AVG}$ with $(-0.171){\pm}(-0.012)$ units. Budge sonance function was proposed the small action from axial action on body control. We know a body motion response from axial action was not only variation of budge sonance, but also body motion of fast body motion.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1027-1039
• /
• 2021

In this study, we investigated the optimal meteorological conditions for cloud seeding using aircraft over the Korean Peninsula. The weather conditions were analyzed using various data sources such as a weather chart, upper air observation, aircraft observation, and a numerical model for cloud seeding experiments conducted from 2018 to 2019 by the National Institute of Meteorological Sciences, Korea Meteorological Administration. Cloud seeding experiments were performed in the seasons of autumn (37.0%) and winter (40.7%) in the West Sea and Gangwon-do. Silver iodide (70.4%) and calcium chloride (29.6%) were used as cloud seeding materials for the experiments. The cloud seeding experiments used silver iodide in cold clouds. Aircraft observation revealed relatively low temperatures, low liquid water content, and strong wind speeds in clouds with a weak updraft. In warm clouds, the cloud seeding experiments used calcium chloride. Observations included relatively high temperatures, high liquid water content, and weak wind speeds in clouds with a weak updraft. Based upon these results, we determined the comprehensive meteorological conditions for cloud seeding experiments using aircraft over the Korean Peninsula. The understanding of optimal weather conditions for cloud seeding gained from this study provide information critical for performing successful cloud seeding and rain enhancement.

• Composites Research
• /
• v.31 no.5
• /
• pp.186-191
• /
• 2018

Condition and properties of composites with different chemical structure of epoxy matrix were observed after saline solution treatment. Epoxy was used as matrix and the flexibility was controlled by using 2 typed-epoxies and 3 types hardeners (amine, acid anhydride and amide). Saline water treatment was conducted with 6 wt% NaCl solution at $60^{\circ}C$ for 0, 15, and 30 days. Cross section was observed and interfacial and mechanical and properties was evaluated. Amine type exhibited the highest crosslinking density and mechanical and interfacial properties whereas water absorbance was lowest. It is because that the water molecules can be hardly penetrate into the epoxy matrix or the interface between epoxy and glass fiber and it leads to saline water resistance of composites.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.1
• /
• pp.27-35
• /
• 1989

An algorithm that searches the general AND-OR graph is proposed. The convergence and the efficiency of the algorithm is examined and compared with an existing algorithm for the AND-OR graph. It is proved that the proposed algorithm is superior to the existing method both in the quality of the solution and the number of node expansions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.209-213
• /
• 1987

This paper presents decentralized discrete-time system which is optimized by hierarchical control for process automation via the extended interaction balance method. This proposed method can control general matrix which input matrix is not block diagonalization. Also, this paper shows convergence condition of proposed method.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.633-641
• /
• 2004

In this paper we deal with functions in higher dimension. We provide several convergence theorem for approximation by convolution type delta sequence. We also give sufficient and necessary condition for Gibbs phenomenon to exist.