• 보존과학회지
• /
• 제31권2호
• /
• pp.87-94
• /
• 2015

플라스틱 작품은 다양한 환경조건에 따라 갈라짐, 색변화, 백화현상 등 재질손상이 급속하게 발생될 수 있다. 특히 현대예술작품 중 대형 플라스틱 작품의 경우 옥외에 전시되는 경우가 많으며, 이에 강한 햇빛과 높은 습도, 강우 등 물리적, 화학적 손상 요인에 지속적으로 노출되어 있다. 따라서 본 연구에서는 polypropylene(PP), polystyrene(PS), polyetylene(PE), polyvinyl chloride(PVC), polyurethane(PU)의 5가지 범용 플라스틱 표준 재료를 고온, 자외선, 그리고 고온 및 자외선 복합 조건에 노출시킴으로써 환경조건에 따른 플라스틱 종류별 열화 양상을 평가하였다. 그 결과 인공열화에 따른 PP, PS, PE에서 육안 변화가 크게 나타났으며 특히 PP, PS는 가장 큰 색차가 발생하였다. 인장강도와 표면접촉각 측정결과 PP는 큰 변화가 없었고 PS는 가장 많이 감소되는 것을 확인하였다. 광열화에 가장 취약한 재질은 PP와 PS, 내광성이 가장 좋은 재질은 PVC와 PU로 확인되었다. 또한 열화 조건 중 자외선 조건과 고온 및 자외선 복합 조건에서 가장 심한 열화 정도가 확인되었다. 이는 자외선은 직접적 열화 조건으로 작용하였으며 고온의 경우 플라스틱 결합에너지를 끊을 만한 충분한 에너지가 되지 못하기 때문에 순수한 열적에너지로서의 열화 조건보다는 열화 촉매로서 작용한 것으로 판단된다. 이러한 결과는 향후 플라스틱 작품의 재질별 손상원인을 규명하고 보존방안 수립을 위한 기초자료로 활용될 것으로 기대된다.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.192-198
• /
• 2020

The 3D point cloud is a key technology of object detection for virtual reality and augmented reality. In order to apply various areas of object detection, it is necessary to obtain 3D information and even color information more easily. In general, to generate a 3D point cloud, it is acquired using an expensive scanner device. However, 3D and characteristic information such as RGB and depth can be easily obtained in a mobile device. GNN (Graph Neural Network) can be used for object detection based on these characteristics. In this paper, we have generated RGB and RGBD by detecting basic information and characteristic information from the KITTI dataset, which is often used in 3D point cloud object detection. We have generated RGB-GNN with i-GNN, which is the most widely used LiDAR characteristic information, and color information characteristics that can be obtained from mobile devices. We compared and analyzed object detection accuracy using RGBD-GNN, which characterizes color and depth information.

• 융합보안논문지
• /
• 제6권4호
• /
• pp.91-99
• /
• 2006

그 동안 이루어진 웹 캐싱에 대한 연구주제는 캐시에 대한 구조적인 접근을 통한 성능의 향상과, 캐싱 기법 자체에 대한 연구, 이들 기법을 혼합적으로 결합한 기법에 대한 연구가 주로 이루어져 왔다. 또한 기존의 웹 객체 참조특성 분석은 웹 로그를 통한 히스토리 분석, 사용자선호도, 데이터마이닝 관점에서의 사용자 특성을 위주로 이루어져왔다. 본 연구에서는 웹 객체참조특성을 확률분포적인 특성 관점에서 분석하며, 이를 통해 객체의 평균수명을 분석하고 이를 웹 캐싱 성능 향상에 도입하는 새로운 연구 방법을 제시한다. 본 연구는 다양한 연구로 발전할 수 있으며, 전자상거래시스템의 성능향상, 지연시간 계산을 통한 고객 만족도의 향상, 웹 로그분석을 통한 데이터마이닝 분야 등 다양한 분야에 대해 연구의 파급 효과가 기대된다.

• 한국산업융합학회 논문집
• /
• 제1권2호
• /
• pp.49-54
• /
• 1998

In the catalytic combustor, combustion characteristic and deterioration of catalysts were affected by non-uniformity of pre-mixed gas, Therefore, formation of uniform pre-mixed gas is one of important subjects. In this study, the effect of uniformity and non-uniformity of pre-mixed gas supplied to the catalyst was examined to clarify reaction acceleration and combustion characteristic of the catalytic combustion. It was clarified that static mixer or vaporizer tube length of about 150mm and weak swirl to a combustion air were effictive expedient to make uniform pre-mixed gas. And catalystic inlet temperature needs more than $600^{\circ}C$ with rich pre-mixed gas to active reaction.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.179-186
• /
• 2002

This paper proposed LC resonant current fed high frequency inverter for high frequency induction heating using leakage inductance of transformer and, its described operating principle. The analysis of circuit presented by using normalized parameter in considering leakage inductance of transformer and, discussed characteristic evaluation of inverter circuit in detail. The proposed inverter is operating ZVS to reduce turn-on and turn-off loss of switching devices so, raised an efficiency. And, the experimental apparatus was made on base characteristic evaluation of theoretical analysis to discuss possibility on high frequency source and confirmed a rightfulness theoretical analysis. A result of study, the proposed inverter is higher utilizing factor using on leakage inductance of transformer and show possibility, which is application on high frequency power system.

• 한국산업융합학회 논문집
• /
• 제16권1호
• /
• pp.14-20
• /
• 2013

In this study, characteristic of new materials for repairing/reinforcement of sea and underwater structures using urethane were studied experimentally. As a results, following their good result was obtained. Materials and construction methods due to a chemical reaction, so no seams, shape or form, regardless of the variety of civil engineering in the field can be applied. Fast workability, hardening existing concrete compared with 80% in shortening. Than the existing large concrete pouring construction cost could be reduced by more than 30%.

• Journal of electromagnetic engineering and science
• /
• 제17권4호
• /
• pp.233-237
• /
• 2017

In this paper, a dual-band high frequency (HF) and ultra-high frequency (UHF) radio-frequency identification (RFID) tag antenna is presented that operates in the 13.56 MHz band as well as in the 920 MHz band. A spiral coil along the edges of the antenna substrate is designed to handle the HF band, and a novel meander open complementary split ring resonator (MOCSRR) dipole antenna is utilized to generate the UHF band. The dual-band antenna is supported by a single-feeding port for mono-chip RFID applications. The antenna is fabricated using an FR4 substrate to verify theoretical and simulation designs, and it has compact dimensions of $80mm{\times}40mm{\times}0.8mm$. The proposed antenna also has an omnidirectional characteristic with a gain of approximately 1 dBi.

• 한국산업융합학회 논문집
• /
• 제14권1호
• /
• pp.15-21
• /
• 2011

Welding variables and conditions in gas metal arc welding (GMAW) effect on the quality and productivity of the weld, extensive research efforts have been made to analyze the effect of the welding variables and conditions. In this study dynamic behavior of GMAW system is investigated using the characteristics of the power supply, wire and welding arc. Characteristic equation of wire is modified to include the effect of droplets attached at the electrode tip. The dynamic characteristics of arc length, current, voltage with respect to the step, ramp inputs of CTWD was simulated. From results of simulation, some predictions about dynamic characteristics of GMAW and welding process are available. The proposed simulator and results appear to be utilized to determine the proper welding conditions, to be improved by considering power supply dynamic characteristics.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.145-150
• /
• 2014

The purpose of this study was to evaluate the growth of lettuce last for 36 days. Lettuce planted on the same medium with different treatment. The first treatment watering using bio-fertilizer (farmer) and second watering using effective microorganism. Lettuce grown in greenhouse with temperature $18-32^{\circ}C$.Characteristic observed that growth in height and weight of the plants. From the observations that can be generated at high observation, treatment 1 had a higher than treatment 2. On the last day treatment plant with treatment 1 had a 99.8 mm high while treatment 2 has height of 90.7 mm. Observation on severe treatment 1 has a heavier weight than treatment 2. Plants with treatment 1 have a weight on the last day of 0.15665 grams while in plants with treatment 2 weights are 0.11365 grams.

• 한국산업융합학회 논문집
• /
• 제4권2호
• /
• pp.207-213
• /
• 2001

Welding variables and condition in gas metal arc welding (GMAW) effect on the weld quality and productivity, extensive research efforts have been made to analyze the welding variables and conditions. In this study dynamic behavior of GMAW system is investigated using the chararcteristic equations of the power supply. wire and welding arc. Characteristic equation of wire is modified to include the effect of droplets attached at the electrode tip. The dynamic characteristics of arc length, current, voltage with respect to the step, ramp inputs of CTWD was simulated. From results of simulation, some predictions about dynamic characteristics of GMAW and welding process are available. The proposed simulator and results appear to be utilized to determine the proper welding conditions, to be improved by considering power supply dynamic characteristics.