• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.155-162
• /
• 2016

최근에는 소프트웨어개발 프로세스나 도구보다는 개인과의 상호작용을 희망하고, 고객은 포괄적인 문서보다는 우선 작동하는 소프트웨어를 희망하며, 개발자는 계약에 대한 협상보다는 고객과의 협력을, 서로가 계획을 고수하기 보다는 변화에 대응하는 것을 더욱 가치 있게 생각한다. 이러한 관점에서, 소프트웨어 개발은 프로세스 중심보다는 프로젝트팀에게 자율성과 동기를 부여하고, 열정과 비전 등 인간관계 중심의 관리방식이 요구되고 있다. 최근에 와서 애자일 개발프로세스가 생산성 증대효과, 품질향상, 고객만족 등의 효용성이 입증되면서 프로젝트를 추진 할 때 방법론 선택에 있어, 전문가들에게 주목을 받게 되었다. 시대적 요구와 사용자 요구에 부응하기 위한 방법론 선정과 관련, 본 논문에서는 조직 구성에 있어, 제품 기반의 Cross functional team의 문제점을 해결하고자 제안된 방법론이 Feature Team 모델이며, 이 모델이 Cross functional team을 조직하고, 이 팀이 결과물(프로덕트) 단위가 아니라, 기능단위로 여러 프로덕트에 걸쳐서 개발을 진행하는 모델이라는 점에 대해 조사하였으며, 가치-주도형 애자일 기법을 통해 계획-기반형 모델과 차이점을 제시하였다. 그리고 객체지향모델링을 위해서는 기존의 JAD(joint application development)회의가 목표로 하는 도메인 분석, 요구추출, 모델링과 정리, 검토과정에 있어, UML 구조도와 행동도를 사전에 숙지하고 프로젝트를 진행하도록 제안한다.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.95-102
• /
• 2007

The conceptual design of the MIT modular pebble bed reactor is described. This reactor plant is a 250 Mwth, 120 Mwe indirect cycle plant that is designed to be deployed in the near term using demonstrated helium system components. The primary system is a conventional pebble bed reactor with a dynamic central column with an outlet temperature of 900 C providing helium to an intermediate helium to helium heat exchanger (IHX). The outlet of the IHX is input to a three shaft horizontal Brayton Cycle power conversion system. The design constraint used in sizing the plant is based on a factory modularity principle which allows the plant to be assembled 'Lego' style instead of constructed piece by piece. This principle employs space frames which contain the power conversion system that permits the Lego-like modules to be shipped by truck or train to sites. This paper also describes the research that has been conducted at MIT since 1998 on fuel modeling, silver leakage from coated fuel particles, dynamic simulation, MCNP reactor physics modeling and air ingress analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1227-1234
• /
• 2011

Korea is a mountainous country, with as much as 70% of the area is covered by hills and mountains. This geography places constraints on the minimum radius of curvature for the rail network. It was expected that the speed of trains could be enhanced on the existing railway network without a huge investment in infrastructure by using tilting trains. The development of tilting trains in Korea started in 2001 as research & development project. A 6-car prototype test tilting train, called the Tilting Train eXpress (TTX), was built in December 2006 and experimental trials began in 2007. TTX has distributed power, is designed to run at 200 km/h, and has a planned service speed of 180 km/h. In this paper, we first describe the performance of tilting train, and then present the estimated running times, and the time saving compared with today's conventional trains and non-tilting trains, based on the Jungang line. So the time saving could be separated into two effects by higher track top-speed and tilting devices.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1743-1753
• /
• 2011

Seoul Metropolitan Government has performed alternative transit system, light rail transit(LRT), for settling the problems of urban public transit system based on conventional bus service and heavy rail transit(HRT). LRT projects of total 8 lines(about 73.6km), including Ui-Sinseol line, have been planned as Build-Transfer-Operate(BTO) projects. For the first LRT, Ui-Sinseol line, however, design of structure had met standard for design of HRT, because of no domestic design code for LRT when participates of Ui-Sinseol project submitted the design proposal. This case study reports a successful example of LRT design minimizing the scale of stations designed in base of HRT code. The problems, like oversized structures compared with LRT vehicles, excessive costs for construction, had been resolved through negotiations with the participates of Ui-Sinseol line. Result suggests that present and future costs for construction and maintenance of the LRT projects in Seoul be considerably reduced in advance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2952-2960
• /
• 2011

The railway safety in Koreaisthreatenedduetotherestructuring of the railway industries, introduction of the Korea Train eXpress (KTX) and electrification of the conventional lines. Many technical backgrounds are required to control railway accidents as low as reasonably practicable, such as a railway safety act, safety standards, and safety assessment infrastructures. Korean government and the Korea Railroad Research Institute (KRRI) are conducting an integrated R&D program for improvement of the railway safety, where the target is to reduce the accident fatalities by half. The program is composed of three parts; the safety system engineering and the program management, the establishment of a safety management system, and the development of techniques for assessing and preventing major railway accidents. Details of the research programs are explained in this paper, where risk is used as the major control measure.

• Journal of Construction Engineering and Project Management
• /
• 제4권2호
• /
• pp.1-7
• /
• 2014

Radio Frequency Identification (RFID) has been applied to the construction industry for improving the efficiency of material and process management. Most RFID-related studies have focused on building or plant construction. The application of RFID has been limited in pipeline construction projects where materials are stored and stacked across a large construction site. This paper investigates practical issues in pipeline construction, improves the read rates of RFID tags, and tests their utility by putting them into practice. This paper demonstrates the benefits that may be expected with the use of improved RFID tags and the development of an automated pipeline construction management system. As a result, pipeline construction management time decreased by 28 hours per month compared to the conventional method. Cost decreased by about 26%.

• ETRI Journal
• /
• 제32권2호
• /
• pp.222-229
• /
• 2010

A conventional pseudorandom sequence generator creates only 1 bit of data per clock cycle. Therefore, it may cause a delay in data communications. In this paper, we propose an efficient implementation method for a pseudorandom sequence generator with parallel outputs. By virtue of the simple matrix multiplications, we derive a well-organized recursive formula and realize a pseudorandom sequence generator with multiple outputs. Experimental results show that, although the total area of the proposed scheme is 3% to 13% larger than that of the existing scheme, our parallel architecture improves the throughput by 2, 4, and 6 times compared with the existing scheme based on a single output. In addition, we apply our approach to a $2{\times}2$ multiple input/multiple output (MIMO) detector targeting the 3rd Generation Partnership Project Long Term Evolution (3GPP LTE) system. Therefore, the throughput of the MIMO detector is significantly enhanced by parallel processing of data communications.

• 한국CDE학회논문집
• /
• 제16권6호
• /
• pp.449-457
• /
• 2011

The productivity improvement is indispensible to shipbuilding industry for maintaining the world's No. 1. Simulation based production recently has been an issue as prat of efforts to high efficiency production and Korean shipyards requests simulation system tools specialized in a shipbuilding industry. IT convergence project between conventional shipbuilding industry and IT simulation technology has been carried out and integrated simulation framework was proposed as a way to overcome sporadic developments. The framework would provide reusability of kernels and modules and also ensure for expansibilities to other production simulations. The fact that production simulation system should reflect shipyard requirement would be most important. We suggest an analysis process of customer requirements and functional requirements for production simulations. It is partially based on concepts of software engineering and axiomatic design. The process is applied to a design of configuration for simulation framework.

• 정보기술과데이타베이스저널
• /
• 제2권2호
• /
• pp.71-85
• /
• 1995

Many research results conducted by neural network researchers have claimed that the classification accuracy of neural networks is superior to, or at least equal to that of conventional methods. However, in series of neural network classifications, it was found that the classification accuracy strongly depends on the characteristics of training data set. Even though there are many research reports that the classification accuracy of neural networks can be different, depending on the composition and architecture of the networks, training algorithm, and test data set, very few research addressed the problem of classification accuracy when the basic assumption of data monotonicity is violated, In this research, development project of automated credit evaluation system is described. The finding was that arrangement of training data is critical to successful implementation of neural training to maintain monotonicity of the data set, for enhancing classification accuracy of neural networks.

• 산업공학
• /
• 제15권3호
• /
• pp.279-285
• /
• 2002

A break-even analysis is a method used widely for profit planning or decisions in most companies. It is useful tool in financial studies because it is simple and offers useful insights from a modest amount of data. Although it is widely used, it has some weaknesses. It is limited in particular to the analysis for a short term time horizon or one period. We suggest a new break-even procedure to analyze projects with a long term time horizon as keeping the simplicity of a conventional break-even analysis. We will make efforts doing to include actual data for a cost or an income as much as possible rather than developing a mathematical model to improve unreality of a traditional break-even analysis. Also, we will use the spreadsheet software to solve problems.