• 통상정보연구
• /
• 제12권4호
• /
• pp.257-277
• /
• 2010

This paper examined the supply chain management Integration factors and evironmental performance in Korean industry. As SCM got evolved, the importance of Socially and Environmentally Responsible Supply Chain among the Supply Chain members are increased. we should consider the following critical factors such as SCM Integration, environmental practice, SCM performance and environmental performance. The purpose of this study is to focus on linkage between conventional SCM factors with new environmental factors to clarify the critical factor for the SCM firms who may concerns about environmental performance. Based on the analysis of sixty-two cases, the following results were found. First, SCM Integration factors of supply chain management have a positively significant influence on SCM performance and environmental performance of supply chain management. Second, SCM performance have a positively significant influent on environmental performance. Third, environmental practice factors of supply chain management have a positively significant influence on SCM performance but not significant influence on environmental performance. This study suggests that with high level of Integration and environmental practice, firms may have good result on SCM performance and environmental performance. Especially, our empirical evidence shows that environmental practices without good SCM performance, may not have good result on environmental performance.

• 디지털콘텐츠학회 논문지
• /
• 제16권1호
• /
• pp.53-61
• /
• 2015

최근 학습자 중심의 창의설계교육에 대한 관심과 요구가 급속히 높아지고 있으나 대부분의 대학에서는 아직 이를 위한 교과과정 및 창의설계실 등을 충실히 갖추고 있지 못하다. 본 논문에서는 공학교육에서 큰 관심을 모으고 있는 창의설계교육을 위한 설계중심의 교과과정 및 이를 수행하기 위한 종합설계실 구축 방안을 제시한다. 전자공학전공을 중심으로 기존 교과과정을 분석하고 이를 바탕으로 입문설계와 요소설계를 거쳐 종합설계로 이어지는 설계중심의 공학교육을 효과적으로 수행할 수 있는 새로운 교과과정 구성과 이 교과과정을 바탕으로 실무능력을 배양하기에 적합한 종합설계실의 구축 방안을 제시한다.

• 한국식품조리과학회지
• /
• 제19권4호
• /
• pp.403-412
• /
• 2003

The purpose of this study was to develop methods for foodservice employees to perform by measuring their levels of sanitation and hygiene practices. The employees' sanitation and hygiene competency list for school foodservice was developed on the basis of the job standardization. The competency list was divided into three parts; (1) before starting the work, (2) during the work and (3) after the work. The levels of the employees' sanitation and hygiene practices were evaluated by dietitians and by the employees themselves. Most schools had conventional foodservice systems (83.4%), which were operated by contract management (94.8%). It was found that the highest practice level related to sanitation and hygiene before starting work, with the lowest levels observed after work. The item related to the cleaning and sanitizing of dishes had the lowest practice level score. Employees perceived their sanitation and hygiene practice after work to be worse than before starting and during work. The items of ″Clean and sanitize all large stationary equipment after every use, and record equipment monitoring chart″ and ″Do not clean dishes and utensils in production area″ had the lowest scores by employees. The scores of the employees were similar to the perception of the dietitians.

• 지역사회간호학회지
• /
• 제18권1호
• /
• pp.156-164
• /
• 2007

Purpose: This study was to investigate adequate strategies of PBL in community health nursing for learning in the real community situation. Method: Data were collected in a PBL class of 14 third-year students who solved problems and assessed PBL in community health nursing related to visiting nursing and chronic diseases. Results: The students guessed situations diversely, chose learning issues widely and mapped the learning concepts specifically. In the assessment of the presentation, the peers of the same group gave the highest score $29.00{\pm}3.36$, the tutor lowest score $22.83{\pm}5.15$. In 5-point Likerts scale, the group dynamic was highest ($4.18{\pm}.61$) and the presentation was lowest ($3.59{\pm}.84$). Conclusion: The group needs to include students who have experiences in the practice at the health centers. The PBL class should be managed by the block system along with the conventional learning. Students needs to practice the self-directed learning and the presentation in a first semester and then PBL. The introduction of community health nursing begins with the conventional lecture and the programs on life circle and health centers through PBL in the comprehensive curriculums.

• Journal of Genetic Medicine
• /
• 제12권2호
• /
• pp.72-78
• /
• 2015

Recently, noninvasive prenatal test (NIPT) has been adopted as a primary screening tool for fetal chromosomal aneuploidy. The principle of NIPT lies in isolating the fetal fraction of cell-free DNA in maternal plasma and analyzing it with bioinformatic tools to measure the amount of gene from the target chromosome, such as chromosomes 21, 18, and 13. NIPT will contribute to decreasing the need for unnecessary invasive procedures, including amniocentesis and chorionic villi sampling, for confirming fetal aneuploidy because of its higher positive predictive value than that of the conventional prenatal screening method. However, its greater cost than that of the current antenatal screening protocol may be an obstacle to the adoption of this innovative technique in clinical practice. Digital polymerase chain reaction (dPCR) is a novel approach for detecting and quantifying nucleic acid. dPCR provides real-time diagnostic advantages with higher sensitivity, accuracy, and absolute quantification than conventional quantitative PCR. Since the groundbreaking discovery that fetal cell-free nucleic acid exists in maternal plasma was reported, dPCR has been used for the quantification of fetal DNA and for screening for fetal aneuploidy. It has been suggested that dPCR will decrease the cost by targeting specific sequences in the target chromosome, and dPCR-based noninvasive testing will facilitate progress toward the implementation of a noninvasive approach for screening for trisomy 21, 18, and 13. In this review, we highlight the principle of dPCR and discuss its future implications in clinical practice.

• 소성∙가공
• /
• 제15권8호
• /
• pp.609-614
• /
• 2006

Micro-alloyed steels(MA steels) for cold forging was developed to replace the usual quenched and tempered steel. MA steels have several advantages over the conventional quenched and tempered carbon steels. First of all, energy consumption could be lowered due to the elimination of spherodizing annealing and quenching/tempering heat treatment. Also, bending during quenching could be avoided when MA steels are applied for manufacturing of long fastener parts. However, larger amount of load is exerted on the dies compared than in the case of conventional mild steels, which might lead to the earlier fracture of dies, when MA forging steels are applied in forging practice. Therefore, die lift could be a critical factor to determine whether HA forging steels could be widely applied in cold forging practice. In the present study, authors have investigated the forging characteristics of non-heat treated micro-alloyed steel by using a series of experimental and numerical analyses. Firstly, microstructural features and its effect on the deformation behavior have been studied. Numerical analysis has been done on the forging of guide rod pin to investigate for the optimization of forging process and die stress prediction.

• 한국작물학회지
• /
• 제58권1호
• /
• pp.78-83
• /
• 2013

The excessive and indiscriminate use of chemical fertilizers in the past has brought serious soil and other environmental problems so alternatives over this agrochemical are being searched. Our study focuses on the effects of expanded rice hull inoculated with selected beneficial microorganisms on growth (through agronomic characters), yield and yield components, and grain quality indices of rice. Results showed that favorable effects of different expanded rice hull preparations were not readily apparent at vegetative stage and only treatments with supplemental chemical fertilizer application were comparable with the conventional practice. Expanded rice hull combined with 50% rate of chemical fertilizer exhibited a significantly higher yield (6,471 kg $ha^{-1}$) over conventional practice (5,719 kg $ha^{-1}$). Good milling quality indices were observed in treatments having 50% chemical fertilizers plus alternatives from expanded rice hull. Finally, we demonstrated that chemical fertilizer rate can potentially be reduced into 50% if combined with expanded rice hull, and show even better output than chemical fertilizer alone.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.455-462
• /
• 2003

The current practice of estimating bearing capacity usually employs the conventional bearing capacity formula originally developed for strip footings under vertical central loading, In order account for the effect of footing shape and eccentricity and inclination of loads, correction factors are introduced in the formula, which are derived based on a number of small-scale model test observations. In this paper, comparison of several formulations of bearing capacity factors, as well as values of these factors, are presented. And the conventional bearing capacity equations are compared with some of other failure loci proposed for cohesive soil. Also, the bearing capacity of shallow foundation estimated by the conventional bearing capacity equations are compared with the experimental load test results.

• 한국임상수의학회지
• /
• 제19권1호
• /
• pp.103-106
• /
• 2002

Specific diagnosis of orthopedic disease can be diffcult in canine practice. Failure to detect the clinical signs of a disorder during physical examination of dogs with acute or chronic lameness is the most common reason for failure to make specific diagnosis. A 6-month-old, female doberman with history of swelling and non-weight-bearing lameness in the left forelimb was referred to Beterinary Teaching Hospital of Chungbuk National University. Physical examination, plain radiography, and conventional three-phase radionuclide bone scan were performed in the patient. Based on the physical exam and radiography, this case was diagnosed as elbow strain and subluxation. Conventional three-phase bone scan detected soft tissue inflammation and osteochondral lesions of elbow joint, and revealed good agreement with clinical findings. Therefore, conventional three-phase bone scan was able to provide the precise information about inflammation of soft tissue and osteochondral lesions of joint.

• 기본간호학회지
• /
• 제22권1호
• /
• pp.49-58
• /
• 2015

Purpose: This study was conducted to identify the effects of a standardized patients (SP) simulation program for nursing students on nursing competence, communication skill, self-efficacy and critical thinking ability for blood transfusion. Methods: A nonequivalent control group non-synchronized design study was used and included as participants 96 junior nursing students at C University. The SP group (n=48) participated in the teaching class using a SP, while the control group (n=48) received conventional practice education. The outcome measurements were nursing competence, communication skill, self-efficacy, and critical thinking ability for transfusion. Results: Nursing competence, communication skill, self-efficacy, and critical thinking ability improved for students in both groups after training ($2.01{\leq}t{\leq}13.03$, p<.05). Self-efficacy showed greater improvement in students in the SP group compared to the control group (t=3.36, p<.001). Conclusion: SP simulation practice may be more effective in enhancing self-efficacy than that of conventional practice education. Whether self-efficacy will contribute to enhancing learning motivation for nursing students needs further examination.