• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.220-227
• /
• 2002

Now, Korea National Railroad is planning many ways to increase the maximum operating speed of train up to 200km/h by 2010. Among those ways, connecting conventional line with the KTX is the strongest alternative. Mostly, conventional lines are consisting of both KS50N and KS6O rail. However, the excessive abrasion might be occurred between wheel and rail when the KTX designed to operate on UIC60 is operating on the conventional line. On this study, new standard of 60kg-class rail considered suitability for both KTX and wheel used in conventional line is presented. It seems to be an effective solution for increasing maintenance costs expected when commercial speed of conventional line is increasing.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.237-243
• /
• 2006

Deicing system is to melt frost or ice freezed in catenary line when the temperature is lower than $0^{\circ}C$ in winter. The principle of deicing system is to melt frost or ice by Joule heat of catenary impedance. The performance of deicing is dependant of deicing current determined by the length of deicing section, deicing impedance and current division ratio of catenary line and messenger line. So, we present technique for estimating deicing current and process for determination of deicing section in the conventional line. Deicing impedance is estimated using Carson-Pollaczek equation, and current division ratio of catenary line and messenger line is estimated using voltage drop, and deicing current is estimated using power system data of deicing system. For the determination of the final deicing section, we verified estimated value comparing with experiment value of deicing impedance and current division ratio of catenary line and messenger line using low voltage experiment. Finally, we verified the validity of estimation technique and process using a simulated test data of real deicing system operation in the Chungju Substation, Chungbuk line.

• Tribology and Lubricants
• /
• v.19 no.4
• /
• pp.187-194
• /
• 2003

This paper describes the characteristics of wheel wear of high speed train running on the conventional line. Conventional line has many curved tracks that cause severe wheel flange wear. The influences of lubrication, cant deficiency, curve radius on wheel wear are also described considering the operation performance of the highspeed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear of railway wheels.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.948-953
• /
• 2002

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or a housing project near an existing railroad is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise on conventional line.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.399-404
• /
• 2004

When high speed train runs on heavy curvature section of conventional line, squeal noise emitted from the railroad and wheel. This noise is very unpleasant to the near habitant. In this study, the characteristics and the countermeasures of the squeal noise of high speed train running on the conventional line was investigated.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.135-142
• /
• 2000

This Paper describes a characteristics of wheel wear of high speed train running on the conventional line. Conventional line has many curved tracks that cause severe wheel flange wear. The influences of lubrication, cant deficiency, owe radius on wheel wear are also described considering the operation performance of the highspeed trainset. A method of calculation using contact patch work model is presented far determination of the evolution by wear of railway wheels.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1914-1921
• /
• 2011

When a railway vehicle passes through curves & transitions, the running speed must be improved by proposing the standards on the maximum running possibility speed of each section on conventional line (Dongdaegoo-Namsunghyun) considering derailment safety. In this paper, To improve the maximum running possibility speed of railway vehicle which passes through curves which have high risk of derailment, the track alignment conditions of conventional line (Dongdaegoo-Namsunghyun) that present transition curve length in current railway construction regulations are controlled. We presented elevation way about the section maximum running possibility speed in conventional line by analysis result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.518-523
• /
• 2000

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or a housing project near an existing railroad is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to Quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise on conventional line.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.899-904
• /
• 2007

Improvement projects has been progressed for railway electrification and double track line in the conventional line as well as high speed line for the high speed and large transportation capability of railway. Especially, many variable operation plans are possible such as interaction between high speed line and conventional line and operation of tilting train due to the electrification of the conventional line. Railway electrification is more energy efficient and environmentally-friendly, but it has some problems such as an enormous initial construction and maintenance costs and electrical accidents. Therefore, the more intensive research will be progressed about railway electrification effectiveness for the continuous electrification project. So, we analyzed railway electrification effectiveness about the energy side using annual operation data of electric car and diesel car. The energy side was divided into energy costs and national energy consumption for analyzing electrification effectiveness about entire line and specific line. We verified advantage of energy costs and national energy consumption in this paper and this result will contribute to the progress of the continuous electrification project and the more efficient operation ways in electrification line

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1270-1276
• /
• 2003

This paper describes an analytical method for wheel wear prediction. The outputs from vehicle dynamic software are used to calculation the wheel wear. Two calculation examples are shown for a high-speed line and a conventional line. Through the comparison of two cases, we can see the wheel wear characteristics on the conventional line and the high-speed line. The conventional line has many curved tracks that cause severe wheel flange wear. The influences of curve radius on wheel wear are also described considering the operational performance of the high speed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear railway wheels.